Accelerator 55028 by Nouryon is cobalt accelerator in aliphatic solvent mixture for curing UP resins at ambient temperatures. The curing of unsaturated polyester resins at ambient temperatures can... view more

Accelerator NL-49P by Nouryon is a solution of 1% cobalt in solvent mixture used as an accelerator for curing UP resins at ambient temperatures. The radical formation, which is necessary to start... view more

Accelerator NL-51P by Nouryon is a solution of 6% cobalt in solvent mixture used as an accelerator for curing UP resins at ambient temperatures. The radical formation, which is necessary to start... view more

Accelerator NL-53 by Nouryon is a solution of 10% cobalt in solvent mixture used as an accelerator for curing UP resins at ambient temperatures. It is used in continuous laminating, resin transfer... view more

Accelerator NL-64-100 by Nouryon is a low-reactive amine accelerator used for curing unsaturated polyesters at ambient temperatures. The radical formation, which is necessary to start the... view more

Accelerator NL-65-100 by Nouryon is a high-reactive amine accelerator used for curing unsaturated polyesters at ambient temperatures. It is used in pultrusion, resin transfer molding, filament... view more

Laurox by Nouryon is an initiator for (co)polymerization of styrene, ethylene, vinylidene chloride and (meth)acrylates. It is also used as an initiator for curing acrylic solid surface at elevated... view more

Laurox S by Nouryon is an initiator for (co)polymerization of styrene, ethylene, vinylidene chloride and (meth)acrylates. It is also used for the suspension and mass polymerization of vinyl chloride... view more

Laurox W-40 by Noruyon is an initiator (40% water-based suspension) for micro-suspension polymerization of vinyl chloride, vinylidene chloride, acrylates and methacrylates. In many cases, Laurox... view more

Perkadox® 16 by Nouryon is an initiator for suspension polymerization of acrylates and methacrylates. It is used for the curing of unsaturated polyester resins and methacrylic resins mainly in the... view more

Perkadox® 16-W75 by Nouryon is an initiator for production of PVC, PVA, PVOH, (meth)acrylates and acrylics in the temperature range between 40°C and 65°C. It can be used alone or in combination with... view more

Perkadox® 16S by Nouryon is an initiator for production of PVC, PVA, PVOH and acrylics and polymerization of (meth)acrylates. It is also used as a curing agent for unsaturated polyester and... view more

Perkadox® 24-FL by Nouryon is an initiator for polymerization of vinylidene chloride, (meth)acrylates production. It is used as an initiator for the suspension and mass polymerization of vinyl... view more

Perkadox® 24L by Nouryon is an initiator for polymerization of vinyl chloride, vinylidene chloride, (meth)acrylates and HMS-PP production by reactive extrusion process. It is used in the temperature... view more

Perkadox® AIBN by Nouryon is a solid initiator for bulk, solution and suspension polymerization of a wide variety of monomers such as styrene, vinyl chloride, vinylidene, acrylonitrile, acrylates... view more

Perkadox® L-W75 by Nouryon is an initiator (75% peroxide concentration as wet powder) for (co)polymerization of styrene, acrylonitrile, vinylacetate, methacrylates and acrylates. It is also used for... view more

Perkadox® SE-8 by Nouryon is an initiator for the (co)polymerization of ethylene and vinylidene chloride. It is an excellent initiator for the suspension and mass polymerization of vinyl chloride in... view more

Trigonox® 101 by Nouryon is an initiator for the production of controlled rheology polypropylene (CR-PP) in the temperature range 180-250°C. It allows polypropylene producers great flexibility in... view more

Trigonox® 101-10PP by Nouryon is a polymerization initiator. It is an efficient peroxide formulation for the production of controlled rheology polypropylene (CR-PP) in an extrusion process in the... view more

Trigonox® 101-20PP by Nouryon is an initiator for the production of controlled rheology polypropylene (CR-PP) in an extrusion process in the temperature range 200- 250°C. It allows polypropylene... view more