Cohedur® A 250 by Rhein Chemie Additives (Lanxess Group) is an adhesion promoter additive. It can directly bond rubber with commonly used fabrics, textile fibers, such as rayon, polyamide and... view more

Cohedur® H 30 by Rhein Chemie Additives (Lanxess Group) is a direct bonding agent for rubber to fabric (rayon, polyamide and polyester) and brass- or zinc-plated steel cord bonding. It also... view more

Rhenocure® 1000 C by Rhein Chemie Additives (Lanxess Group) is a vulcanization accelerator for natural- and synthetic rubber with very slow scorch rates and relatively slow cure rates. It can be... view more

Rhenocure® TP/S by Rhein Chemie Additives (Lanxess Group) is a non-staining special accelerator for the rapid vulcanization of compounds based on EPDM and other diene rubbers. It shows good flow and... view more

Rhenocure® ZBOP/S by Rhein Chemie Additives (Lanxess Group) is a non-staining specialty accelerator for rapid vulcanization of EPDM and other diene rubbers for N-nitrosamine free curing. It exhibits... view more

CBS(CZ) (Oil powder) by Rongcheng Chemical General Factory is a N-Cyclohexyl-2-benzothiazole sulfenamide which acts as an accelerator. It shows excellent physical property after vulcanization... view more

CBS(CZ) (Powder) by Rongcheng Chemical General Factory is a N-Cyclohexyl-2-benzothiazole sulfenamide and acts as an accelerator. When vulcanized it shows excellent physical property. CBS(CZ)... view more

ETU(NA-22) (Oil powder) by Rongcheng Chemical General Factory is an ethylene thiourea grade which acts as an accelerator. It provides excellent physical properties such as high tensile strength, low... view more

ETU(NA-22) (Powder) by Rongcheng Chemical General Factory is an ethylene thiourea grade which acts as an accelerator. It offers excellent physical properties such as high tensile strength, low... view more

LOWINOX® 22M46 stabilizer by SI Group is phenolic antioxidant. It is used for synthetic rubbers and latexes by providing resistance against heat and oxygen. It has no tendency for blooming to occur... view more

VULCOFAC® EGDMA-70 by Safic-Alcan is a blend of 70% ethylene glycol dimethacrylate and 30% silicon dioxide. It acts as a vulcanizing/ curing agent. It is a difunctional methacrylic monomer which is... view more

VULCOFAC® HD-IMINE by Safic-Alcan is an N, N’-dicinnamylidene 1, 6-hexanediamine. It can be used for the vulcanization of elastomers that are reacting with amines. It is recommended for fluorinated... view more

VULCOFAC® HMDAC by Safic-Alcan is a hexamethylene diamine carbamate. It acts as a vulcanizing agent. It is recommended for elastomers reacting with amines such as ethylene acrylate copolymers... view more