Antimicrobial & antibacterial masterbatch with PPH as the carrier resin. It contains a long lasting broad spectrum antimicrobial agent against gram-positive and gram-negative bacteria as well as... view more

Silver based antimicrobial masterbatch with PPH as the carrier resin. It is very effective for a broad spectrum of microorganisms such as bacteria, fungi and algae. Used in PP products. Its... view more

Antislip masterbatch with PE as the carrier resin. It contains coarse particle size inorganic additive. Provides rough surface. Used in polyolefin films and sacks. Its recommended dosage rate is... view more

Combination of heat and processing stabilizer. Is an antioxidant masterbatch with PE as the carrier resin. Also acts as a heat stabilizer. Improves the heat and processing stability of polyolefin... view more

Combination of heat and processing stabilizer. Is an antioxidant masterbatch with PE as the carrier resin. Also acts as a heat stabilizer. Improves the heat and processing stability of polyolefin... view more

Fast migration antistatic masterbatch with PE as the carrier resin. Recommended for fast antistatic effect during processing and short term performance. Used for polyolefin film extrusion and molded... view more

Slow migration antistatic masterbatch with PE as the carrier resin. It is mostly suitable for HDPE films and PE or PP injection and blow-molding. Its recommended dosage rate is 2-4%. It is approved... view more

Amine free antistatic masterbatch with PE as the carrier resin. It is mostly suitable for HDPE films and PE or PP injection and blow-molding. It does not affect the color or clarity of the polymer... view more

Slow action antistatic masterbatch with PPH as the carrier resin. It is mostly suitable for PP injection and blow-molding. Its recommended dosage rate is 2-4%. It is approved for use in contact with... view more

Special inorganic diffuser masterbatch with PE as the carrier resin. Provides an opacifying effect combined with increased haze/diffusion when used in polyolefin films, without affecting the... view more

Selected halogen free flame retardant masterbatch with PE as the carrier resin. Also provides UV and thermal stabilization. Its recommended addition rate to comply with NFPA 701 is 2-3 % in PP... view more

Selected halogen free flame retardant masterbatch with PE as the carrier resin. Also provides UV and thermal stabilization. Used in LDPE films (50 μm), PP fibers and films. Its recommended addition... view more

Combination of bromine compound & antimony trioxide. Is a flame retardant with PPH as the carrier resin. It is designed for PP products, particularly stadium seats and other furniture. Its... view more

Combination of bromine compound & antimony trioxide. Is a flame retardant with PPH as the carrier resin. It is designed for PP products. Its recommended addition rate is 12 % for V2 classification... view more

Organic bromine compound. Is a flame retardant with LLDPE as the carrier resin. Used for PE and PP extrusion and injection molding products without affecting transparency. Its recommended addition... view more

Nucleating masterbatch with PP as the carrier resin. Enhances stiffness and shortens cycle times during the molding process. Acts as a nucleating agent, by creating a large number of small size... view more

Nucleating masterbatch with PP as the carrier resin. Acts as a clarifying agent. It contains a new technology clarifying agent for PP which dissolves in the melt giving increased transparency... view more

Optical brightner masterbatch with PPH as the carrier resin. It absorbs light in the UV-A range and re-emit it as blue light. This feature improves the appearance of the plastics products by masking... view more

Combination of erucamide and oleamide. Is a slip agent masterbatch with PE as the carrier resin. It reduces coefficient of friction of films. Its recommended dosage rate is 0.5-2%. It is approved... view more

Erucamide. Is a slip agent masterbatch with PE as the carrier resin. It reduces coefficient of friction of films. Recommended for extrusion. Its recommended dosage rate is 0.5-2%. It is approved... view more