Dabco® 2033 by Evonik is a catalyst based on optimized tertiary amine. Offers broad processing latitude in the production of flexible slabstock polyurethane foam. Increases bun height at critical... view more

Dabco® 25-S by Evonik acts as a catalyst. It is used in the synthesis of prepolymers and curing of polyurethanes... view more

Dabco® 33-LV by Evonik acts as catalyst. It is used in the synthesis of prepolymers and curing of polyurethanes... view more

Dabco® 33-LX by Evonik is a multi-purpose catalyst. It can be used as a one-to-one replacement for Dabco 33-LV® catalyst or as a three-to-one replacement for Dabco® crystalline catalyst in all foam... view more

Dabco® BL-11 by Evonik is an active amine catalyst. It is designed for all types of flexible foam and extrusion blow molding applications. It is suitable for thermoplastic polyurethane... view more

Dabco® BL-17 by Evonik is a delayed-action catalyst. Used in energy absorbing non-recoverable rigid foams. Dabco® BL-17 is suitable for thermoplastic polyurethane and extrusion blow molding... view more

Dabco® BL-19 by Evonik is a catalyst based on bis(2-dimethylamino ethyl) ether. It is a tertiary amine that primarily promotes the urea (water-isocyanate) reaction. Dabco® BL-19 is suitable for... view more

Dabco® Crystalline by Evonik is a crystalline, 100% solid triethylene diamine (TEDA)-based catalyst with high-purity. Used in all types of polyurethane foams including flexible slabstock, flexible... view more

Dabco® DC 3043 is a blowing agent by Evonik. It is silicone glycol copolymer for use in shoe soles. Dabco® DC 3043 is suitable for TPU applications... view more

Dabco® DC198 by Evonik acts as an emulsifier. It is a high-potency silicone glycol copolymer with high efficiency. Provides good stability in both water and amine premixes. Dabco® DC198 is used in... view more

Dabco® DC2525 by Evonik acts as a silicone stabilizer and emulsifier. Used in cold cure flexible molded MDI and MDI/TDI polyurethane systems. Dabco® DC2525 is suitable for processing by extrusion... view more

Dabco® DC2584 by Evonik is a high efficiency surfactant and foaming agent. Designed for flexible molded foam applications, MDI and MDI/TDI cold cure systems. It has a low fogging potential... view more

Dabco® DC5000 by Evonik acts as a foaming agent. It is a non-hydrolysable silicone glycol copolymer suitable for TPU applications... view more

Dabco® DC5043 by Evonik is a low viscosity emulsifier based on a silicone glycol copolymer. Used in high-resiliency flexible polyurethane foams. Provides non-hydrolyzable bonding and is suitable for... view more

Dabco® DC5098 by Evonik is a non-hydrolyzable silicone emulsifier by Evonik. Used in rigid polyurethane and polyisocyanurate foam. Dabco® DC5098 offers very good dimensional stability... view more

Dabco® DC5103 by Evonik acts as a silicone surfactant. Offers very good emulsification properties. It is suitable for thermoplastic polyurethane... view more

Dabco® DC5160 by Evonik acts as a foaming agent. It is based on silicone glycol. Provides medium to high efficiency. Dabco® DC5160 is suitable for thermoplastic polyurethane... view more

Dabco® DC5164 by Evonik is a high-efficiency silicone surfactant. Used for cold cure flexible molded polyurethane foam systems. Suitable for extrusion blow molding applications. Offers very good... view more

Dabco® DC5179 by Evonik is a surfactant based on a non-hydrolysable silicone. Provides very good vent stability. Dabco® DC5179 is suitable for thermoplastic polyurethane... view more

Dabco® DC5188 by Evonik is a high efficiency silicone stabilizer by Evonik. Acts as a foaming agen for polyether flexible slabstock formulations. Dabco® DC5188 is suitable for TPU resin... view more