Polyether glycol. Exhibits good compatibility with organic chemicals. It has good solubility in water. Recommended for case and non-foam applications... view more

POLYDO DP-4000 by Kukdo Chemical is polyether diol based on propylene oxide. Compatible with most polyether polyols and can be blended with other diols or triols. POLYDO DP-4000 is recommended for polyurethane... view more

POLYDO DP-4000E by Kukdo Chemical is a polypropylene glycol. Compatible with most polyether polyols and can be blended with other diols or triols. POLYDO DP-4000E is recommended for polyurethane and other... view more

POLYDO DP-700N by Kukdo Chemical is a polyether polyol with 2 or 3 functional groups. Exhibits low viscosity and offers excellent flowability. It is produced to be able to compound pre-polymer safely and... view more

Polyether glycol. Exhibits good compatibility with organic chemicals. It has good solubility in water. Useful for prepolymer production and chain extender in elastomer formulations. Recommended for... view more

Mixture of 3-Methyl- 1,5- pentanediol and trimethylol propane adipate. It is a polyester polyol. It is hydrophobic, heat-, water- and cold resistant. It is resistant to hydrolysis, alkali and acid... view more

Mixture of 3-Methyl- 1,5- pentanediol and trimethylol propane adipate. It is a polyester polyol. It is tough, hydrophobic, heat-, water- and cold resistant. It is resistant to hydrolysis, alkali and... view more

Mixture of 3-Methyl- 1,5- pentanediol and trimethylol propane adipate. It is a polyester polyol. It is hydrophobic, heat-, water- and cold resistant. It is resistant to hydrolysis, alkali and acid... view more

Kuraray Polyol F-510 by Kuraray is a mixture of 3-Methyl- 1,5- pentanediol and trimethylol propane adipate. It is a polyester polyol. It is hydrophobic, heat-, water- and cold resistant. It is resistant to... view more

1,9-Nonanediol adipate. It is a polyester polyol. Used in special foam, shoe soles, soft TPU spandex, automotive interior and coinjection molding applications... view more

Addolink®3530 is a polyester polyol. Used to manufacture polyurethane elastomers, such as Baytec HC and Baytec LT. Recommended storage temperature is 15-30°C. Shelf life is 12 months if stored in... view more

FOMREZ® 11-112 by Lanxess is diethylene adipate. It is hygroscopic and a hydroxyl terminated saturated linear polyester. Used in plastics. FOMREZ® 11-112 complies with DSL, EINECS, TSCA, AICS, ENCS... view more

FOMREZ® 11-45 by Lanxess is diethylene glycol adipate. It is a hydroxyl terminated saturated linear polyester. Used in plastics. FOMREZ® 11-45 complies with TSCA, DSL, AICS, KECI, PICCS and IECSC... view more

FOMREZ® 11-56 by Lanxess is diethylene glycol adipate. It is hygroscopic and a hydroxyl terminated saturated linear polyester. Used in plastics. FOMREZ® 11-56 complies with DSL, EINECS, TSCA, AICS... view more

FOMREZ® 124-112 by Lanxess is a blend of ethylene glycol adipate and butylene glycol adipate. FOMREZ® I24-112 is used in plastics... view more

Polymeg® Polyol 1000 by LyondellBasell is a polytetramethylene ether glycol. It is a diol produced through the polymerization of tetrahydrofuran. It is linear in structure with a backbone of repeating... view more

Polytetramethylene ether glycol. It is a diol produced through the polymerization of tetrahydrofuran. It is linear in structure with a backbone of repeating tetramethylene units connected by ether... view more

Polytetramethylene ether glycol. It is a diol produced through the polymerization of tetrahydrofuran. It is linear in structure with a backbone of repeating tetramethylene units connected by ether... view more

Soy polyol. This diol was developed to provide formulators with an exceptional, sustainable alternative to traditional petroleum products. Has higher reactivity, lower color and less steric... view more

Soybean oil polyol. Provides formulators with an exceptional, sustainable alternative to traditional petroleum products. Exhibits higher reactivity, 100% primary functionality, lower color and less... view more

Diethylene Glycol (DEG) by MEGlobal is a colorless, low-volatility, low viscosity and hygroscopic liquid. It offers higher boiling point, viscosity and specific gravity as compared to ethylene... view more

Ethanediol. It is a polyester polyol and a diol. It is an odorless, syrupy liquid with a sweet taste. It augments the capabilities to include applications that require chemical intermediates for... view more

1, 3-Propanediol (PDO). Produced biologically from glycerol, a by-product of biodiesel production. It is a chemical base compound with exceptional physical qualities. Also, it is inexpensive and... view more

RD -PG11 by MPOB is palm oil based polyol. It is used in the manufacture of polyurethane which is suitable as an insulator in refrigerators, roof insulators, wall panels, ceiling panels, cornices... view more

RD -PG31 by MPOB is palm oil based polyol. It is used in the manufacture of polyurethane which is suitable as an insulator in refrigerators, roof insulators, wall panels, ceiling panels, cornices... view more

RD -PG51 by MPOB is palm oil based polyol. It is used in the manufacture of polyurethane which is suitable as an insulator in refrigerators, roof insulators, wall panels, ceiling panels, cornices... view more

Polypropylene glycol. It is manufactured by ethoxylation or propoxylation of a polyhydric alcohol in the presence of a catalyst. The polyhydric alcohols used are ethylene glycol, di-propylene... view more

Polypropylene glycol. It is manufactured by ethoxylation or propoxylation of a polyhydric alcohol in the presence of a catalyst. The polyhydric alcohols used are ethylene glycol, di-propylene... view more

Polypropylene glycol. It is manufactured by ethoxylation or propoxylation of a polyhydric alcohol in the presence of a catalyst. The polyhydric alcohols used are ethylene glycol, di-propylene... view more

Polypropylene glycol. It is manufactured by ethoxylation or propoxylation of a polyhydric alcohol in the presence of a catalyst. The polyhydric alcohols used are ethylene glycol, di-propylene... view more

Polypropylene glycol. It is manufactured by ethoxylation or propoxylation of a polyhydric alcohol in the presence of a catalyst. The polyhydric alcohols used are ethylene glycol, di-propylene... view more

It is a polyester polyol and is brown in color. It is developed as special and provides high heat isolation with its high resistance againts fire and its non fragile and close cell structure. It is... view more

MELPOLY R400-2 by Meltem Kimya is an aromatic, two functional, low viscosity polyester polyol. MELPOLY R400-2 is used in the production of rigid polyurethane. It is used in sandwich panel production... view more

MELPOLY V200-2 by Meltem Kimya is an aromatic, two functional, low viscosity polyester polyol. MELPOLY V200-2 is used in the production of rigid polyurethane. It is used in sandwich panel production... view more

MELPOLY V460-3 by Meltem Kimya is an aromatic, two functional, low viscosity polyester polyol. MELPOLY V460-3 is used in the production of rigid polyurethane. It is used in sandwich panel production... view more

Pentaerythritol technical Grade A, first grade (tech) by Metadynea is used for the production of polyether. Pentaerythritol technical Grade A, first grade (tech) has a shelf life of 2 years from the date of manufacturing... view more

Pentaerythritol technical Grade ?, high grade (mono) by Metadynea is used for the production of polyether. It has a shelf life of 2 years from the date of manufacturing... view more

Pentaerythritol technical Grade B (nitration) by Metadynea is used for the production of polyether. It has a shelf life of 2 years from the date of manufacturing... view more

Pentaerythritol technical micronized First grade by Metadynea is used for the production of synthetic lubricants and alkyd resins. Pentaerythritol technical micronized First grade has a shelf life of one year... view more

Pentaerythritol technical micronized High grade by Metadynea is used for the production of synthetic lubricants and alkyd resins. Pentaerythritol technical micronized High grade has a shelf life of one year... view more

2-Ethyl hexanol by Mitsubishi Chemical is a polyol monomer with 8-carbon higher alcohol species and has very low-level of impurities and may be used as a raw materials for a wide variety of chemicals. It is used... view more

HS0840B by Mitsubishi Chemical is a biomass-based linear polycarbonate diol (with hydroxyl groups at both ends). It easily reacts with isocyanate compounds (such as MDI, TDI, IPDI, H12MDI) and... view more

HS0850B by Mitsubishi Chemical is a biomass-based linear polycarbonate diol (with hydroxyl groups at both ends). It easily reacts with isocyanate compounds (such as MDI, TDI, IPDI, H12MDI) and generate... view more

Isobutanol. It is a polyol and a 4-carbon branched-chain alcohol. It has very low-level impurities and may be used as a raw material for a wide variety of chemicals. It is used in manufacture of... view more

NL1000B by Mitsubishi Chemical is a linear polycarbonate diol (with hydroxyl groups at both ends). It easily reacts with isocyanate compounds (such as MDI, TDI, IPDI, H12MDI) and generate polymers... view more

Poly-A® 27-2000 by Monument Chemical is polyether amine polyol. It is a difunctional primary amine. Possesses light color, low viscosity and low vapor pressure. Poly-A® 27-2000 is ideal for aromatic spray polyurea... view more

Poly-A® 27-400 by Monument Chemical is polyether amine polyol by Monument Chemical. Poly-A® 27-400 is designed for elastomer applications... view more

Poly-A® 37-5000 by Monument Chemical is a difunctional polyether amine polyol. Ideal for aromatic spray polyurea elastomer applications. Poly-A® 37-5000 possesses light color, low viscosity and low vapor pressure... view more

Poly-G® 20-112 by Monument Chemical is an extremely versatile polyether diol for elastomers. It is a stable, practically colorless liquid that is neither volatile nor corrosive, with a low pour point and high... view more

Poly-G® 20-265 is polyol polyether diol by Monument Chemical. Designed to produce rigid, castable urethane elastomers with high tensile strength and minimal elongation. It is used alone or in... view more

Myrinol™ HP 210 by Myriant is made from renewable bio-succinic acid and is a cost effective high performance liquid polyol. It is designed for use in cast elastomers, polyesters, moisture cure... view more

Myrinol™ HP 210 Flex by Myriant is made from renewable bio-succinic acid and is a cost effective high performance liquid polyol. It is designed for use in cast elastomers, polyesters, UV curable... view more

Myrinol™ HP 310 by Myriant is made from renewable bio-succinic acid and is a cost effective high performance liquid polyol. It is designed for use in cast elastomers, polyesters, moisture cure... view more

Myrinol™ HP 56 by Myriant is made from renewable bio-succinic acid and is a cost effective linear polyol. It is designed for use in cast elastomers, polyesters, thermoplastic urethane, 2K urethane... view more

Polyether polyol. It is an amine-based alcohol containing multiple hydroxyl groups. Suitable for crosslinking reactions... view more

Polyether polyol. It is an amine-based alcohol containing multiple hydroxyl groups. Suitable for crosslinking reactions... view more

Polyether polyol. It is an amine-based alcohol containing multiple hydroxyl groups. Suitable for crosslinking reactions... view more

Polyether polyol. It is an amine-based alcohol containing multiple hydroxyl groups. Suitable for crosslinking reactions... view more

Polyether polyol. It is an amine-based alcohol containing multiple hydroxyl groups. Suitable for crosslinking reactions... view more

NISSO-PB G-1000 is a both-end hydroxyl group-terminated polybutadiene. Acts as a resin modifier. It can be used as a diol component of polyester, polyurethane, and other polymers because of hydroxyl... view more

NISSO-PB G-2000 is a both-end hydroxyl group-terminated polybutadiene. Acts as a resin modifier. It can be used as a diol component of polyester, polyurethane, and other polymers because of hydroxyl... view more

NISSO-PB G-3000 is a both-end hydroxyl group-terminated polybutadiene. Acts as a resin modifier. It can be used as a diol component of polyester, polyurethane, and other polymers because of hydroxyl... view more

NISSO-PB GI-3000 is a hydrogenated polybutadiene. Acts as a resin modifier. In addition to chemical stability, the compound has hydroxyl groups on both ends as the active sites. It has a high... view more

NISSO-PB GI-2000 is a hydrogenated polybutadiene. Acts as a resin modifier. In addition to chemical stability, the compound has hydroxyl groups on both ends as the active sites. It has a high... view more

Branched, solvent-free castor oil-based polyol emulsion. It is a micro-emulsion and offers very good flowing properties in combination with extremely long storage stability. It enables the use of... view more

Branched castor oil based polyol. It exhibits high shore D hardness stability against hydrolysis, UV- and chemical resistance. It is hydrophobic, has high reactivity, high viscosity and good... view more

Branched, solvent-free castor oil-based polyol. It has high reactivity, high hydroxyl content, good adhesive properties, low viscosity and is hydrophobic. It exhibits high shore D hardness and... view more

Branched, solvent-free castor oil-based polyol. It has high reactivity, high hydroxyl content, good adhesive properties, low viscosity and is hydrophobic. It exhibits high shore D hardness and... view more

Solvent-free aromatic diluent polyol. It is hydrophobic and lowers the viscosity. Used in manufacture of plastics... view more

ADICROL A 38 by Nord Composites is a branched structure, dicarboxylic polyester polyol. It contains MEG, DEG as main glycol and offers reduced extraction time. ADICROL A 38 is used in polyols for the... view more

ADICROL A 56 by Nord Composites is a dicarboxylic polyester polyol. It has a linear structure and contains MEG as main glycol. ADICROL A 56 is recommended for the production of sandals with low molding... view more

ADICROL A 62 by Nord Composites is a slightly branched, dicarboxylic polyester polyol with polymeric modifications. It contains MEG as main glycol. It is used in polyurethane (PU) systems for footwear... view more

ADICROL AGR 60 by Nord Composites is a dicarboxylic polyester polyol. It has a slightly branched structure and contains MEG as main glycol. Its polymeric modification makes it suitable in the production of... view more

ADICROL B 112 by Nord Composites is an aliphatic polyester polyol with a linear structure and 1,4-BDO as main glycol. It is recommended for casting elastomers and thermoplastic polyurethanes (TPU). ADICROL B 112... view more