ADICROL FD 245 by Nord Composites is a linear structure aromatic polyester polyol with DEG as main glycol. ADICROL FD 245 exhibits good fire resistance and balanced mechanical properties. It is used in the... view more

ADICROL FD 250 by Nord Composites is an aromatic modified polyester polyol with DEG as main glycol. It has linear structure and lower hydroxyl number. ADICROL FD 250 is recommended for production of PIR... view more

ADICROL FD 315 by Nord Composites is a low viscosity, aromatic polyester polyol. It has linear structure and contains DEG as main glycol. ADICROL FD 315 is used in the production of rigid PU foams and rigid PIR... view more

ADICROL FLD 240 by Nord Composites is a linear structure, aromatic modified polyester polyol with DEG as main glycol. It is used in combination with other polyols for the production of rigid polyurethane (PU)... view more

ADICROL FR 500 by Nord Composites is a low viscosity, aromatic-modified polyester polyol. It has branched structure and contains DEG as main glycol. It shows good compatibility with isocyanates and allows to... view more

Butanediol (BDO) is a $4B chemical intermediate used today to make textiles, engineering plastics, and solvents. It has the potential to be 30% lower cost than today's processes. Uses ethylene... view more

Succinic acid is a chemical intermediate that was identified by the U.S. Department of Energy's biomass program as a top 12 target molecule. It is less expensive, uses the existing infrastructure... view more

OxBalance® TCD Alcohol DM by OQ Chemicals is tricyclodecane dimethanol made from 70% biobased and biocircular feedstocks. It is a sustainable alternative to conventional TCD Alcohol DM. It is mass-balanced and... view more

3(4), 8(9)-Bis-(hydroxymethyl)-tricyclo-[5.2.1.02,6]decane. It functions as a starting material for various formulations. Used in manufacture of specialty acrylates, resins and plastics... view more

TCD-Diamine by OQ Chemicals is 8-hydroxymethyltricyclo-[5.2.1.02,6]decane. It functions as a starting material for various formulations. TCD-Diamine is used in the manufacture of epoxy resin hardeners and... view more

C10 Fraction Non-hydrogenated by ORLEN Unipetrol is a hydrocarbon fraction, produced as a by-product of hydrocarbon pyrolysis via steam cracker process. It is used in the production of hydrocarbon... view more

Ethylene by ORLEN Unipetrol is manufactured by pyrolysis of oil fractions. It is a non-toxic, extremely combustible and easily inflammable gas. Ethylene is used to produce polymers like polyethylene... view more

Propylene by ORLEN Unipetrol is manufactured by pyrolysis of oil fractions. It is a non-toxic, extremely combustible and easily inflammable gas. Propylene is used in production of polymers such as... view more

Propylene FCC by ORLEN Unipetrol is manufactured by pyrolysis of oil fractions. It is a non-toxic, extremely combustible and easily inflammable gas. It is present in liquid form at 20°C. It is used... view more

RADIA 7282 by Oleon is polyester polyol. It exhibits hydrophobicity, flexibility, elongation and hardness. It is a semi-crystalline, yellow colored wax, available in the form of flakes. It is... view more

RADIA 7285 by Oleon is polyester polyol. Exhibits hydrophobicity, flexibility and elongation. It is an amorphous, pale yellow colored viscous liquid. It is used in elastomers... view more

Polyester polyol. Exhibits hydrophobicity, flexibility, tensile strength and hydrolytic resistance. Is an amorphous viscous liquid. Used in elastomers... view more

RADIA 7287 by Oleon is polyester polyol. Exhibits hydrophobicity, flexibility and elongation. Is an amorphous, viscous, yellow colored liquid. It is ideal for polar substrates. It is used in... view more

RADIA 7288 by Oleon is polyester polyol. It exhibits hydrophobicity, flexibility, tensile strength and hydrolytic resistance. It is an amorphous, yellow colored wax. It is used in elastomers... view more

It is made of polyolic component Petol C 2106 and diphenyl methane-di isocyanate (crude MDI). Polyolic component Petol C 2106 is a mixture of polyols with catalyzer, fire-proofing agent, water and... view more

Polyether polyol. It is formulated for the manufacture of fireproofing rigid polyurethane foams, blown with water. This polyol blend includes surfactant and fireproofing agent... view more

Polypropoxylated p-nonyl phenol formaldehyde-diethanolamine based on mannich. It is a polyether polyol used in polyol blends to obtain rigid foams blown with water. Used for sprayed or molded rigid... view more

Polypropoxylated phenol-formaldehyde-diethanolamine based on mannich. It is a highly reactive polyether polyol. Used for sprayed or molded rigid polyurethane foams. Also used for sandwich panels... view more

Polyether polyol. It is a BHT-free product and can be used both with and without auxiliary blowing agent to produce a wide range of foam grades, from low to high density. PETOL PP® 101 is a... view more

Vinyl [tris-(2-methoxyethoxy) silane]. It is a colorless or light yellow liquid. Easily dissolves in water because of its ether structure. Applications include mineral-filled EPM (ethylene propylene... view more

4-HBA by Osaka Organic Chemical is 4-Hydroxybutyl acrylate. It improves anti-abrasion property and flexibility. It is less toxic than any other hydroxyalkyl acrylate. Miscible with water in all proportions... view more

Iso-butyl acrylate. Can be polymerized with salt of acrylic acid, acrylamide, acrylic esters, methacrylic esters, maleic esters, vinyl acetate, styrene, butadiene etc. Used for acrylic resins... view more

2-Hydroxyethyl acrylate. It is soluble in water. Applicable for polarity modifier... view more

Hydroxypropyl acrylate. It is reactive and miscible in water. It is applicable for polarity modifier... view more

Isononyl acrylate. It is reasonable acrylate monomer of structural isomer. It has very low glass transition temperature (Tg)... view more

A100 by PC-Resin is radiation curable amine functional polyether acrylate (100%). It exhibits extremely low viscosity... view more

A101 by PC-Resin is radiation curable amine functional polyether acrylate (100%). It enhances reactivity and has low odor. A101 can be used as co-initiator for benzophenone... view more

A102 by PC-Resin is radiation curable acrylated amine synergist (100%). It has low odor and high viscosity... view more

Radiation curable, reactive aliphatic urethane acrylate (80%). It is highly reactive and exhibits excellent film properties. It can be diluted in IDA... view more

Radiation curable low viscosity, polyester acrylate (100%). It has high reactivity and crosslinking density... view more

Rokester® 1600 by PCC Rokita is a highly efficient, specialised aliphatic-aromatic polyester polyol which is used in PUR/PIR foams. It is used mainly as a polyol component in the production of... view more

Rokester® 2600 by PCC Rokita is a highly efficient, halogen-free aromatic polyester polyol based on recycled PET plastic. It is suitable for the production of one-component foams (OCF), PUR/PIR foams and... view more

Rokester® 3016 by PCC Rokita is a highly efficient, branched, aromatic polyester polyol. It shows increased adhesion to cladding, including wood Rokester® 3016 is suitable for the production of PUR and... view more

Rokester® 3164.01 by PCC Rokita is a halogen-free, highly efficient, high-functionality, general-purpose, aromatic polyester polyol. It exhibits a high hydroxyl value & low viscosity. It provides very good... view more

Rokester® DP 1952.14 by PCC Rokita is a highly efficient, aromatic polyester polyol designed for the production of PUR/PIR foams. It possesses a low hydroxyl value, and positively influences the emulsifying... view more

Dodecanedioic Acid by Palmary Chemical is a family of organic compounds with a chemical formula of HOOC(CH2)10COOH. It is known as 'long-chain dicarboxylic acids' when the total carbon number is... view more

MixAcid MA2 by Palmary Chemical is a mixture of dibasic organic acids such as sebacic-, undecanedioic- and dodecanedioic acids. It is over 98% long-chain dibasic acid. It has very good corrosion... view more

Mixacid MA1 by Palmary Chemical is a mixture of dibasic organic acids such as sebacic-, undecanedioic- and dodecanedioic acids. It is suitable for high-performance polyamides/nylon applications. It... view more

Undecanedioic Acid by Palmary Chemical belongs to a family of organic compounds with a chemical formula of HOOC(CH2)9COOH. It is also known as 'long-chain dicarboxylic acid' when the total carbon... view more

PIOTHANE® 1000 BA by Panolam Industries International is a butanediol adipate grade. It exhibits excellent lot-to-lot consistency, flexibility, excellent clarity, low color and low reactive by-products. PIOTHANE® 1000 BA is... view more

PIOTHANE® 1000 BNAI by Panolam Industries International is a butylene neopentyl glycol adipate isophthalate grade. It exhibits excellent lot-to-lot consistency, flexibility, excellent clarity, low... view more

PIOTHANE® 1000 CA by Panolam Industries International is a cyclohexanedimethanol adipate grade. It exhibits excellent lot-to-lot consistency, flexibility, excellent clarity, low color and low... view more

PIOTHANE® 1000 DEA by Panolam Industries International is a diethylene adipate grade. It exhibits excellent lot-to-lot consistency, flexibility, excellent clarity, low color and low reactive... view more

PIOTHANE® 1000 EA by Panolam Industries International is an ethylene adipate grade. Exhibits excellent lot-to-lot consistency, flexibility, excellent clarity, low color and low reactive by-products... view more

2-Ethylhexanoic Acid Pro by Perstorp is a partly renewable oxo carboxylic acid. It offers reduced carbon footprint and lower carbon dioxide emissions. It has one carboxylic group based on a C8... view more

2-Ethylhexanoic Acid Pro 100 by Perstorp is 100% renewable oxo-carboxylic acid with traceable mass balanced content. It offers reduced carbon footprint and lower carbondioxide emissions. It exhibits the same... view more

2-Ethylhexanol by Perstorp is a 100% renewable, traceable mass-balanced carbon content-based polyol with one primary hydroxyl group. It is suitable for the production of dioctyl phthalate (vinyl... view more

2-Ethylhexanol Pro 100 by Perstorp is a 100% renewable carbon-based, pro-environment polyol with one primary hydroxyl group. It is widely used as an intermediate in the production of dioctyl phthalate (vinyl... view more

2-Ethylhexanol Pro 25 by Perstorp is a pro-environment polyol with one primary hydroxyl group. It is a renewable drop-in replacement for fossil-based 2-Ethylhexanol, according to a traceable mass... view more