ADK STAB 260 by Adeka is phosphite based stabilizer. Provides good heat stability, color, process stability and weatherability to polymers. ADK STAB 260 is suitable for polyester, polyethylene... view more

ADK STAB 522A by Adeka is heat and color stabilizer for high temperature processing. Provides good process stability and weatherability to polymers. ADK STAB 522A is suitable for polyester... view more

ADK STAB P by ADEKA is phosphite type stabilizer. Provides good heat, color & process stability and weatherability to polymers. ADK STAB P by ADEKA is recommended for use in plastics... view more

ADK STAB QL by Adeka is phosphite type antioxidant. Provides good heat, color & process stability and weatherability to polymers. ADK STAB QL is suitable for polyester, LDPE, PS, PP, PPE, PA, ABS... view more

ADK STAB AO-26 by ADEKA Polymer Additives Europe is a novel antioxidant for use in XLPE power cable applications. It provides improved heat stability and cost effectiveness. It is is suitable for... view more

ADK STAB LA-81 by ADEKA Polymer Additives Europe is a high performing third generation HALS (hindered amine light stabilizer). It can stabilize polymers against photo-degradation even in strong... view more

Noroplast® 2002 by Arkema is an antistatic agent. It is also a wetting and dispersing agent for organic or mineral pigments and mineral fillers. It is suitable for plastic materials such as styrenic... view more

Larostat® 264 A by BASF is a quaternary ammonium compound. Used as most effective cationic antistat. Offers high degree of unsaturation. Eliminates dirt and dust pick-up. Exhibits good thermal... view more

BYK® -9076 by BYK is a solvent-free wetting and dispersing additive for ambient curing resin systems, PVC plastisols and production of color masterbatches for thermoplastics based on PE, PP, ABS... view more

BYK® -9077 by BYK is a solvent-free wetting and dispersing additive for ambient curing resin systems, PVC plastisols, SMC and pultrusion. It does not contain plasticizers. It is recommended for... view more

Hindered amine light stabilizer. Used in wide range of polymers. Offers improved weatherability. Possesses low volatility and very good thermal stability... view more

TYTAN™ CP-219 by Borica is isostearyl titanate-based coupling & dispersing agent. It is a molecular bridge at the interface between inorganic filler such as CaCO3, BaSO4, graphite, carbon black... view more

Di(Tridecyl) Thiodipropionate. Acts as an antioxidant. Used with phenolic antioxidants in polypropylene, ABS or Latex polymer emulsions... view more

DAIFREE GF-700 by Daikin is a solvent-based fluorocarbon mold release agent combined with silicone. It is free from PFOA and PFOS. It shows compatibility in SBR, NBR, EPDM, FKM, CR, ACM, epoxy... view more

DAIFREE GF-750 by Daikin is a solvent-based fluorocarbon mold release agent combined with silicone. It is free from PFOA and PFOS. It produces a thin, even film, making it ideal for the release of... view more

DAIFREE GW-4010 by Daikin is a PFOA- & PFOS-free, water-based mold release agent combined with silicone. It produces a thin, even film, making it ideal for the release of precision components. It is... view more

DAIFREE GW-4510 by Daikin is a water-based fluorocarbon mold release agent that does not contain silicone. It is free from PFOA and PFOS, and produces a thin, even film, making it ideal for the... view more

DAIFREE MS-600 by Daikin is a semi-permanent, solvent-based, fluorocarbon mold release agent. It free from PFOA and PFOS. It is applicable in SBR, NBR, EPDM, FKM, CR, ACM, PE-, PP-, PVC- and ABS... view more

DOMPLAST BIO PTIS by Domus Chemicals is a fatty acid ester. Acts as a lubricant and release agent. It is clear liquid in appearance (measured by MD 0 method). Exhibits good thermostability and low volatility... view more

LOXIOL® 3380 by Emery Oleochemicals is a mixture based on polyglycol ester. Acts as an antistatic agent. It minimizes the risk of electrical discharge that may cause fire or explosion. It is... view more