Proprietary synergistic blend of hydrocarbon waxes and polymer based mold release paste. Paste mold release agent for wood, plaster, fiberglass and metal molds. It is effectively seal the porous... view more

BYK®-A 515 by BYK is a silicone-free, polymer-based, air release agent for solvent-borne and solvent-free epoxy, UP/VE and PUR systems. It improves the fiber wetting in the manufacture and... view more

BYK®-W 966 by BYK is a wetting and dispersing agent for filled unsaturated polyester resins as well as for acrylic, PU and epoxy resins to reduce viscosity and prevent settling. It is used for fiber... view more

BactiBlock® 101 R4.47 supplied by FARRL is an antimicrobial additive suitable to be used in a broad variety of polymeric products like thermosets, thermoplastics, elastomers and rubber. BactiBlock®... view more

BactiBlock® 101 R4.48 supplied by FARRL is an antimicrobial additive suitable to be used in a broad variety of polymeric products like thermosets, thermoplastics, elastomers and rubber. The product... view more

BactiBlock® GEL 101 R4.47/AQ supplied by FARRL is an antimicrobial additive in gel dispersion suitable to be used in a broad variety of liquid polymeric (elastomers, rubber, thermosets) products... view more

MoldX® A110 by Huber Engineered Materials is an alumina trihydrate grade (99.6% content). Acts as a flame retardant. Its unique particle size distribution enables low filled viscosities at high loading levels coupled... view more

MoldX® A400 by Huber Engineered Materials is an alumina trihydrate grade (99.6% content). Acts as a flame retardant. Improves fire retardant and smoke suppressant performance. Imparts processable... view more

SB-336 by Huber Engineered Materials is a low-cost, medium particle size alumina trihydrate (99.6% content) grade. Acts as a flame retardant and smoke suppressant. It is an odorless white powder. The unique... view more

Semi-permanent release agent made to release polyester and vinyl ester-based resins when a matte finish is required but can also be used when molding epoxy and phenolic resin composites, polyester... view more

Application for an internal use... view more

Application for an internal use. Addition from 0.03 to 1% during granulation or directly to the pellets before processing for thermosets resins. Addition from 0.2 to 1% during the last step of the... view more