Innovoh® distributed by DKSH is used as cure additive and acid scavenger in bisphenol cured FKM fluoroelastomers. It contains 100% calcium hydroxide powder. It is not used in peroxide cured... view more

TIB KAT® 808 distributed by DKSH is copper naphthenate-based co-catalyst for the curing of unsaturated polyester resins. It acts as polymerization regulator in the cobalt-catalyzed crosslinking... view more

Luperox® 101PP20 by Arkema is 2,5 dimethyl 2,5 di(tert-butylperoxyl) hexane. It acts as a viscosity modifier, polymerization initiators, crosslinking agent and vulcanizing agent. It offers easy... view more

Luperox® 101PP7.5 by Arkema is 2,5 Dimethyl 2,5 Di(tert-butylperoxyl) hexane. It acts as a viscosity modifier, polymerization initiators, crosslinking agent and vulcanizing agent. It offers easy... view more

Luperox® 11M40 A by Arkema is tert-butyl peroxypivalate-based polymer initiator. It is a lower active concentration formulation. The higher proportion of odorless mineral spirits allows a... view more

Luperox® 223EN60H by Arkema is di-(2-ethylhexyl) peroxydicarbonate. It acts as a polymerization and emulsion initiator. It is designed for water-based polymerization systems (suspension + emulsion)... view more

Luperox® 223M75S by Arkema is di-(2-ethylhexyl) peroxydicarbonate. It acts as a polymerization initiator. It is a 75% active solution of EHP with added organic solvent. It contains a stabilizer that... view more

Lonzacure® DETDA 80 by Arxada is a high-quality diethyl toluene diamine (DETDA). Acts as a chain extender and curing agent/hardener. Provides beneficial thermo-mechanical, chemical and abrasion... view more