Dabco® 3040 is a mild balanced amine catalyst by Evonik. It works well in different kind of iso system like TDI, T/M, M/T and MDI systems. Exhibits excellent surface curing at lower mold temperature... view more

Dabco® 33-LX by Evonik is a multi-purpose catalyst. It can be used as a one-to-one replacement for Dabco 33-LV® catalyst or as a three-to-one replacement for Dabco® crystalline catalyst in all foam... view more

Dabco® 8154 by Evonik is a blocked tertiary amine catalyst. It offers improved curing of the foam. It does not prolong the demold times. It promotes the urethane (polyol-isocyanate) reaction... view more

Dabco® B-16 by Evonik is amine catalyst. Used in polyester die cuttable flexible slabstock foams, integral skin and microcellular systems. Dabco® B-16 provides improved surface cure... view more

Dabco® BA150 by Evonik is a non-emissive, hydrolytically stable blocking agent. It is used to delay the catalyst reaction and to improve flow while maintaining back end cure. Its components are all... view more

Dabco® BDMA by Evonik is benzyldimethylamine catalyst. It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It is also used for... view more

Dabco® BL-11 by Evonik is an active amine catalyst. It is designed for all types of flexible foam and extrusion blow molding applications. It is suitable for thermoplastic polyurethane... view more

Dabco® BL-13 by Evonik is a catalyst based on (2-dimethylamino ethyl) ether. Used in flexible foams. Dabco® BL-13 is designed for extrusion blow molding... view more

Dabco® BL-19 by Evonik is a catalyst based on bis(2-dimethylamino ethyl) ether. It is a tertiary amine that primarily promotes the urea (water-isocyanate) reaction. Dabco® BL-19 is suitable for... view more

Dabco® BLV by Evonik is a blend of blowing and gelling amine catalyst. Used in flexible slabstock foams and extrusion blow molding applications. Dabco® BLV offers superb catalytic activity... view more

Dabco® BP52 by Evonik is a flame lamination agent. It features low viscosity for easy handling and incorporation into the foam formulation. Offers excellent adhesion of the foam to the substrate... view more

Dabco® BX405 by Evonik is a high efficiency amine catalyst. Shows better post-curing performance than DMCHA and catalytic activity equivalent to DMCHA. It strongly catalyzes the reaction of polyol... view more

Dabco® CS90 by Evonik is a tertiary amine catalyst by Evonik. Offers increased foam softening... view more

Dabco® Crystalline by Evonik is a crystalline, 100% solid triethylene diamine (TEDA)-based catalyst with high-purity. Used in all types of polyurethane foams including flexible slabstock, flexible... view more

Dabco® DC1 by Evonik is a catalyst that provides strong gelling and back end cure by promoting the urethane (polyol-isocyanate) reaction while delaying initiation as well as providing long pot life... view more

Dabco® DC193 by Evonik is a silicone surfactant with improved foam formation. It provides excellent flame retardant properties. It possesses good compatibility with most common polyol premixes and... view more

Dabco® DC198 by Evonik acts as an emulsifier. It is a high-potency silicone glycol copolymer with high efficiency. Provides good stability in both water and amine premixes. Dabco® DC198 is used in... view more

Dabco® DC2 by Evinik is a catalyst that provides delayed reaction initiation while maintaining a strong back end cure. It promotes the urethane (polyol-isocyanate) reaction in flexible molded... view more

Dabco® DC2584 by Evonik is a high efficiency surfactant and foaming agent. Designed for flexible molded foam applications, MDI and MDI/TDI cold cure systems. It has a low fogging potential... view more

Dabco® DC2585 is a silicone surfactant and emulsifier by Evonik. Offers very good vent stability and has the ability to eliminate basal cell formation. Possesses low VOC and fogging values and... view more