ACCUREL® GA302 by Evonik is an anti-static masterbatch for styrenic films, sheets or injection molded parts. Also applicable as a release agent for injection molded parts and cell stabilizer for... view more

ACCUREL® GA354 by Evonik acts as a foaming agent. It is an effective cell stabilizing masterbatch in LDPE carrier. Suitable for polyolefin applications, especially in PE foams. ACCUREL® GA354 is... view more

Dabco® 2021 by Evonik is polyurethane catalyst by Evonik. Offers very good processing latitude and increased hardness. Used specifically for low density conventional and HLB flexible slabstock... view more

Dabco® 2033 by Evonik is a catalyst based on optimized tertiary amine. Offers broad processing latitude in the production of flexible slabstock polyurethane foam. Increases bun height at critical... view more

Dabco® 2035 by Evonik is a hardener. Used in flexible polyether slabstock foams... view more

Dabco® 2039 by Evonik is amine catalyst. Used to promote the urethane (polyol isocyanate) reaction. It has low VOC/fogging values. It is a low odor alternative to morpholine based amines in flexible... view more

Dabco® 2040 by Evonik is a low odor amine catalyst. It has a smooth rise profile. It enhances cure and adhesion to substrate in a variety of flexible as well as rigid polyurethane foams. It is... view more

Dabco® 3040 is a mild balanced amine catalyst by Evonik. It works well in different kind of iso system like TDI, T/M, M/T and MDI systems. Exhibits excellent surface curing at lower mold temperature... view more

Dabco® 33-LX by Evonik is a multi-purpose catalyst. It can be used as a one-to-one replacement for Dabco 33-LV® catalyst or as a three-to-one replacement for Dabco® crystalline catalyst in all foam... view more

Dabco® 8154 by Evonik is a blocked tertiary amine catalyst. It offers improved curing of the foam. It does not prolong the demold times. It promotes the urethane (polyol-isocyanate) reaction... view more

Dabco® B-16 by Evonik is amine catalyst. Used in polyester die cuttable flexible slabstock foams, integral skin and microcellular systems. Dabco® B-16 provides improved surface cure... view more

Dabco® BA150 by Evonik is a non-emissive, hydrolytically stable blocking agent. It is used to delay the catalyst reaction and to improve flow while maintaining back end cure. Its components are all... view more

Dabco® BDMA by Evonik is benzyldimethylamine catalyst. It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It is also used for... view more

Dabco® BL-11 by Evonik is an active amine catalyst. It is designed for all types of flexible foam and extrusion blow molding applications. It is suitable for thermoplastic polyurethane... view more

Dabco® BL-13 by Evonik is a catalyst based on (2-dimethylamino ethyl) ether. Used in flexible foams. Dabco® BL-13 is designed for extrusion blow molding... view more

Dabco® BL-19 by Evonik is a catalyst based on bis(2-dimethylamino ethyl) ether. It is a tertiary amine that primarily promotes the urea (water-isocyanate) reaction. Dabco® BL-19 is suitable for... view more

Dabco® BLV by Evonik is a blend of blowing and gelling amine catalyst. Used in flexible slabstock foams and extrusion blow molding applications. Dabco® BLV offers superb catalytic activity... view more

Dabco® BP52 by Evonik is a flame lamination agent. It features low viscosity for easy handling and incorporation into the foam formulation. Offers excellent adhesion of the foam to the substrate... view more

Dabco® BX405 by Evonik is a high efficiency amine catalyst. Shows better post-curing performance than DMCHA and catalytic activity equivalent to DMCHA. It strongly catalyzes the reaction of polyol... view more

Dabco® CS90 by Evonik is a tertiary amine catalyst by Evonik. Offers increased foam softening... view more