Antistatic masterbatch. Also used as a mold release agent in injection molding application. Can be recommended for blow molding, film/sheet, injection molding and thin films... view more

Slip masterbatch. Used for processing temperatures above 220 C, or if the films have to be stored for a long time in hot climates. Can be recommended for blow molding, film/sheet, injection molding... view more

Polymeric chain extender. Used to increase IV and Mw (20% to 40%) of PET, upgrdes quality of PET and PET films / sheets / tapes, extrusion of Polyesters straps, injection blow molding bottles... view more

CRYSTALADD® HM-237 by Ravago Manufacturing Americas is a highly efficient nucleating agent. It is designed for polyethylene film, extrusion, blow molding and injection molding resins. It offers improved clarity in films... view more

CRYSTALADD® HM-237B by Ravago Manufacturing Americas is a highly efficient nucleating agent. It provides faster cycle times, lower shrinkage, and higher barrier properties. It is designed for polyethylene film, extrusion and... view more

CRYSTALADD® HM-237E by Ravago Manufacturing Americas is a highly efficient nucleating agent and processing aid. It also contains a mineral additive. It can improve film properties and yield rates in LLDPE. It is designed to be... view more

CRYSTALADD® HM-664 by Ravago Manufacturing Americas is a nucleating masterbatch. It is designed to reduce cycle time in injection molded polyethylene parts, improve stiffness, HDT, and reduce or improve warpage challenges... view more

Slow migration antistatic masterbatch with PE as the carrier resin. It is mostly suitable for HDPE films and PE or PP injection and blow-molding. Its recommended dosage rate is 2-4%. It is approved... view more

Amine free antistatic masterbatch with PE as the carrier resin. It is mostly suitable for HDPE films and PE or PP injection and blow-molding. It does not affect the color or clarity of the polymer... view more

Slow action antistatic masterbatch with PPH as the carrier resin. It is mostly suitable for PP injection and blow-molding. Its recommended dosage rate is 2-4%. It is approved for use in contact with... view more

CYASORB CYNERGY SOLUTIONS® M535 by Syensqo is a light stabilizer. It imparts excellent UV protection to natural and pigmented PE molded durable applications from 4000 to 16000 hours ASTM G155 weathering. The... view more

Pelletized silicone gum. Used as an additive in thermoplastic systems. Imparts processing improvements and modification of surface characteristics... view more