GRAFTALEN™ MB-HMSPP 01200 by Graft Polymer is a high melt strength long chain branched polypropylene masterbatch. It offers good melt stability at lower shear stress. It is suitable for foaming... view more

HECO® FOAM 940 PE by HECOPLAST is a 40% endothermic system on a PE carrier. Acts as a blowing and nucleating agent. It has a starting temperature of about 150°C. The optimum gas yield will be... view more

HECO® FOAM 940 S by HECOPLAST is a 40% endothermic system on a PS carrier. Acts as a blowing and nucleating agent. It has a starting temperature of about 150°C. The optimum gas yield will be... view more

Mixture. Acts as a blowing agent. It is a dust-free, low-cost masterbatch in granulate/ micro-granulate form comprising both endothermal and exothermal blowing agents. Releases non-toxic gases by... view more

Carbonate-based compound. Acts as a blowing agent. It is a dust-free, low-cost masterbatch. Releases non-toxic gases (carbon dioxide & water vapor) by means of thermally activated decomposition... view more

Carbonate-based compound. Acts as an endothermal blowing agent. It is a dust-free, low-cost masterbatch. Releases non-toxic gases (carbon dioxide & water vapor) by means of thermally activated... view more

Carbonate-based compound. Acts as an endothermal blowing agent. It is a dust-free, low-cost masterbatch. Releases non-toxic gases (carbon dioxide & water vapor) by means of thermally activated... view more

Mixture. Acts as a blowing agent. It is a dust-free, low-cost masterbatch in granulate form comprising both endothermal and exothermal blowing agents. Releases non-toxic gases by means of thermally... view more

bFI A 3745 by Polytives is a polymeric processing aid. It is a flow improver developed to reduce the melt viscosity of various polymers including PMMA and polymer systems thereby increasing the... view more