An organic yellow pigment. Possesses light resistance, heat resistance, oil resistance and migration resistance. Used mainly in PE/PP and PET/PS. Can also be used in ABS, PU, PVC and rubber... view more

Magnesium oxide. Acts as an acid acceptor in specialty elastomers and fluoroelastomers... view more

Solvent-based products. Nonflammable dispersion of PTFE articles. Gives the following benefits : multiple release cycles, no transfer to molded parts, no interference with post finishing and... view more

McLube 1711L by McLube is a hard, dry, bonded PTFE release coating for applications to hot surfaces. Offers multiple release cycles, no transfer to molded parts, no interference with post finishing... view more

Mandrel lubricant and dry film mold release coating. Provides the following benefits : multiple release cycles, no transfer to molded parts, no interference with post finishing and bonding, reduced... view more

Dispersion of PTFE particles which bonds to the surface to generate a colorless, non-oily and adherent dry film coating. Provides the following benefits : multiple release cycles, no transfer to... view more

Colloidal dispersion of PTFE particles in water. Provides a durable, dry, colorless film and lubricant coating. Supplies a semi-permanent release surface. Provides the following benefits : multiple... view more

Nurcacit BIPB 40A is bis(t-butylperoxy isopropyl)benzene-based curing agent by Nanjing Union Rubber Chemicals. It is compatible with CPE, EPDM, EVA, silicone rubbers, NBR and fluoro rubbers. It is... view more

Nurcacit BIPB 40B by Nanjing Union Rubber Chemicals is bis (t-butylperoxy isopropyl) benzene-based curing agent for plastics and rubbers. It contains silica (4-6%) and calcium carbonate (54-56%) as... view more

Nurcacit BIPB 40C is bis (t-butylperoxy isopropyl) benzene-based curing agent by Nanjing Union Rubber Chemicals. It is designed for plastics and rubbers such as CPE, EPDM, EVA, silicone rubbers, NBR... view more

Nurcacit BIPB 40D is bis(t-butylperoxy isopropyl)benzene-based curing agent by Nanjing Union Rubber Chemicals. It is compatible with CPE, EPDM, EVA, silicone rubbers, NBR and fluoro rubbers. It is... view more

Nurcacit BIPB 96 by Nanjing Union Rubber Chemicals is bis(t-butylperoxy isopropyl)benzene-based curing agent for plastics and rubbers. It is compatible with CPE, EPDM, EVA, silicone rubbers, NBR and... view more

ULTRA-LUBE™ 220 by Performance Additives is high molecular weight, aliphatic fatty acid ester. Used as a processing additive. Improves filler incorporation and release of most rubber compounds... view more

Combination of high molecular weight, aliphatic fatty acid ester and special lubricants. Used as a processing additive. Offers very good lubricating properties... view more

Aqueous emulsion of synthetic resins, solvent-free. Used as release agent... view more

VULCOFAC® 4100 by Safic-Alcan is a special blend of a blocked diamine and an accelerator. It offers vulcanization of elastomers reacting with amines such as fluorinated rubbers, ethylene acrylate... view more

VULCOFAC® HD-IMINE by Safic-Alcan is an N, N’-dicinnamylidene 1, 6-hexanediamine. It can be used for the vulcanization of elastomers that are reacting with amines. It is recommended for fluorinated... view more

VULCOFAC® HMDAC by Safic-Alcan is a hexamethylene diamine carbamate. It acts as a vulcanizing agent. It is recommended for elastomers reacting with amines such as ethylene acrylate copolymers... view more

STRUKTOL® HT 290 by Struktol is a silicone-free, processing additive for fluorinated rubbers. It results in improved flow and easier demolding. This blend of fatty acid derivatives and waxes... view more

STRUKTOL® HT 600 by Struktol is a multifunctional, reactive processing aid based on organo-silicones for use in peroxide cross-linkable polymers. It improves processing behavior, physical properties... view more