UMEX 100TS distributed by Toyotsu Chemiplas and manufactured by Sanyo Chemical Industries is a compatibilizer. It is maleic acid-modified polypropylene used in air conditioner cover, plastic pellets and... view more

Dynamar™ FX 5166 by 3M is fluorocarbon elastomer. Used as cure accelerator in polyepichlorohydrin elastomers. Used to adhere incorporated cure Dyneon™ fluoroelastomers and Dyneon™ THV... view more

Technicure® DCMU by A&C Catalysts is a 3-(3,4-chlorophenyl)-1,1-dimethylurea, which is substituted urea. It is a dicyandiamide (DICY) accelerator. Used in composites such as pre-pregs and powder coatings... view more

Technicure® IPDU-8 by A&C Catalysts is an N-3-(dimethylamino) carbonylaminomethyl-3,5,5-trimethylcyclohexyl-N,N-dimethyl-urea. It is substituted urea. It is a dicyandiamide (DICY) cure accelerator. Used in... view more

Technicure® MDU-11M by A&C Catalysts is a [4,4’- (methylene bis (phenyl dimethyl)] urea, is substituted urea. It is a dicyandiamide (DICY) accelerator. Used in composites such as pre-pregs and powder coatings... view more

Technicure® Nano-Dicy is a pulverized grade of dicyandiamide with an average particle size of about 1-2 micron. Acts as a curing agent. Provides excellent adhesion to a variety of substrates and has... view more

Technicure® PDU-250M by A&C Catalysts is a N,N-dimethyl-N-phenyl urea, is a substituted urea. Technicure® PDU-250M is a dicyandiamide (DICY) accelerator. Provides good formulation shelf stability... view more

Proaid® AC 8XL by Akrochem is a highly concentrated, non-staining, non-discoloring processing and dispersing aid. It shows compatibility with most polymers including fluoro-elastomer. It improves mold... view more

SP-6600 Resin (Old Name: Akrochem® P-87) by Akrochem is a cashew nut oil-modified phenol-formaldehyde two-step phenolic resin-based tackifier. It exhibits excellent compatibility in all proportions... view more

MICRON S by Arun Minerals is a talc that is white, soft, non abrasive and free from grit. It exhibits low level of soluble impurities and iron content. Provides purity as compared to other talcs... view more

Compotex VA10 PW by Auserpolimeri offers high levels of adhesion on a wide range of materials. It is a polymer blend based on ethylene-vinyl acetate copolymer modified with maleic anhydride. It is... view more

Compotex VA11 PW by Auserpolimeri is a polymer blend based on ethylene-vinyl acetate copolymer modified with maleic anhydride. It imparts high levels of adhesion to a wide range of materials. It is... view more

Compotex VA12 MICPW500 by Auserpolimeri is a polymer blend based on ethylene-vinyl acetate copolymer modified with maleic anhydride. It imparts high levels of adhesion to a wide range of materials... view more

Compotex VA12 PW by Auserpolimeri is a polymer blend based on ethylene-vinyl acetate copolymer modified with maleic anhydride. It offers high levels of adhesion on a wide range of materials. It is... view more

SCONA TPKD 8102 PCC by {supplier] is a impact strength modifier for polyamide and adhesion promoter for hard/soft composites. Recommended dosage level is 5-20%. Shelf life of SCONA TPKD 8102 PCC is 36 months... view more

SCONA TPPE 2400 PAHD by BYK acts as a viscosity modifier based on a polyethylene (HDPE) functionalized with acrylic acid for polyamide formulations and a compatibilizer for recyclates of polyolefins and... view more

SCONA TPPL 1112 PA by BYK is a bio-based coupling agent for filler- and fiber-reinforced polylactic acid compounds to achieve excellent adhesion to the matrix. It is an outstanding compatibilizer for... view more

SCONA TPPL 1310 PA by BYK acts as a dispersing aid and adhesion promoter for polar materials. It is synergist for viscosity modification for polylactic acid-based compounds to achieve a high level of... view more

SCONA® TPKD 8102 PCC by BYK is an impact strength modifier for polyamide and adhesion promoter for hard/soft composites. It can be diluted with unmodified SEBS at a ratio of 1:1 to 1:2. When used in... view more