BASCO® P0025/02-PE by BARS-2 is a processing aid masterbatch. It is 1st generation PPA-based fluoroelastomer (2.5%). It is designed for PP (polypropylene), HDPE (high density polyethylene), LDPE... view more

BASCO® P0025/22-PE by BARS-2 is a processing aid masterbatch. It is designed for PP (polypropylene), HDPE (high density polyethylene), LLDPE (linear low-density polyethylene) and LDPE (low density... view more

BASCO® PF0025/13-LP by BARS-2 is a processing aid masterbatch. It is 1st generation PPA-based fluoroelastomer (5%). It is suitable for LDPE, HDPE, LLDPE and PP. BASCO® PF0025/13-LP enhances... view more

BASCO® PF0025/32-LP by BARS-2 is a processing aid masterbatch. It is designed for LDPE (low density polyethylene), HDPE (high density polyethylene), LLDPE (linear low density polyethylene) and PP... view more

BactiBlock® 920 B0 supplied by FARRL is an antimicrobial additive suitable to be used in compounding of a broad variety of polymeric products like polyolefins or others to be used in food contact... view more

BactiBlock® 920 B4 supplied by FARRL is an antimicrobial additive suitable to be used in a broad variety of polymeric products like thermosets, thermoplastics, elastomers and rubber. The product is... view more

Ken-React® KPR® REZYK-1280 Powder supplied by FARRL is based on 78% of a monoalkoxy titanate ester compound with an aluminum co-catalyst on silicon dioxide as absorbing carrier. It acts as a co- and... view more

Ken-React® KR® 12 supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with phosphato functionality. It has low viscosity and solid content of min. 95%. It can be used in... view more

Ken-React® KR® TTS supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with isostearoyl functionality. It has low viscosity and solid content of min. 95%. It helps in... view more

PRETEX -7N by ILSHINWELLS is a glycerin fatty acid ester. It acts as an anti-static agent. It neutralizes static electricity and makes water leak. It can be processed by injection molding and sheet... view more

PRETEX -AS500 by ILSHINWELLS is an ethoxylated alkyl amine. It acts as an anti-static agent. It neutralizes static electricity and makes water leak. PRETEX -AS500 can be processed by injection... view more

POLYBATCH® COM DUL 3636 DP 20 by LyondellBasell is a matting agent masterbatch. It provides better matt surface, low pressure in front of the filter allowing higher output and no dust formation at... view more

POLYBATCH® COM DUL 3636 LT2 by LyondellBasell is a matting agent masterbatch. It provides matt surface and heat sealable properties, 115°C of seal initiation temperature can be achieved. It reduces... view more

POLYBATCH® DEG 555 by LyondellBasell is a masterbatch. It contains additive mix which is both photo- and thermo degradable. The speed of degradation depends on the addition rate as well as on the... view more

POLYBATCH® VLA 96 by LyondellBasell is an antistatic agent masterbatch. It is compatible with LDPE, HDPE, m-LLDPE and LLDPE. It is recommended for use in injection stretch blow molding, sheet... view more