Ionphase™ rSTAT2 by Cargill is a halogen-free, UV stabilized, permanent, polymeric anti-static agent. It is non-migrating, not humidity dependent and provides low surface resistivity "> It forms an... view more

SONGSTAB™ MT-800 distributed by DKSH is a PVC stabilizer. It is a mixture of dimethyltin bis(2-ethylhexylthioglycolate) and mono methyltin tris-(2-ethylhexylthioglycolate). It offers very good... view more

Millad® NX® 8000 by Milliken is a clarifying agent designed for clear polypropylene. It allows polypropylene to approach the look of high clarity plastics like polystyrene and polycarbonate. This... view more

Hyperform® HPN® 20E by Milliken is a high performance nucleating agent for polypropylene. It offers excellent stiffness/impact balance, unique isotropic shrinkage and superior CLTE performance. It... view more

Hyperform® HPN® 600ei by Milliken is a high-performance nucleating agent for polypropylene. It offers higher stiffness/impact performance, high flexural modulus and fast crystallization rate... view more

Millad® NX® 8000 for Blow Molding by Milliken is a clarifier for blow molding grades of polypropylene. Offers clarity, gloss, fresher look and low yellowness index. It is designed specifically to provide a step change in... view more

Millad® NX® 8000 ECO by Milliken is a sustainable, clarifying agent for crystal clear PP. It allows polypropylene to approach the look of high clarity plastics like polystyrene and polycarbonate... view more

Dynamar™ FX 5911 by 3M is fluoropolymer-based processing aid. It improves extrusion processing of polyolefins and other thermoplastic resins, and can offer performance and cost benefits in a wide... view more

Dynamar™ PPA FX 5922 by 3M is free-flowing fluoropolymer. It is used as polymer processing aid in LLDPE, HDPE, EVA and other polyolefins for blow molding, film blowing and film casting by extrusion... view more

ADK STAB 465 by ADEKA is di-normal octyl tin mercaptide based stabilizer. It provides excellent heat, color and transparency. It is suitable for processing by blow molding. ADK STAB 465 is used in... view more

ADK STAB BT-31 by Adeka is dibutyl tin maleate type stabilizer. Provides excellent initial color transparency. It is designed for blow molding and extrusion. ADK STAB BT-31 is suitable for whole... view more

ADK STAB LS-2 by Adeka is butyl tin maleate type lubricant for PVC. Gives good properties with tin maleate stabilizer. ADK STAB LS-2 is processed using extrusion and blow molding... view more

ADK STAB OT-1 by ADEKA is octyl tin type stabilizer. It offers excellent heat and process stability with Ca-Zn stabilizers & outstanding lubricity. It is suitable for rigid sheets, films and blow... view more

ADK STAB SP-86 by Adeka is a heavy metal-free, Mg-Zn type stabilizer. Offers excellent heat stability and molding workability. ADK STAB SP-86 is used in general purpose applications. It can be... view more

Orgater MB.BA.25 by ADEKA Polymer Additives Europe is a foaming agent. It is used for very fine cells foaming of resins like PP and HDPE specially for extrusion blow molding applications. Recommended working temperature is... view more

ADD-MAX® 104 by AddComp (Altana Group) is a LDPE carrier resin-based processing aid masterbatch. It is designed to lower the apparent viscosity of the polymer melt during processing. ADD-MAX® 104 provides reduction... view more

LDPE carrier resin based processing aid masterbatch. It is designed to lower the apparent viscosity of the polymer melt during processing. It provides reduction of melt-fracture phenomenon along... view more

LDPE carrier resin based processing aid masterbatch. It is designed to lower the apparent viscosity of the polymer melt during processing. It reduces friction between the polymer melt and internal... view more