AEROBATCH® U 125 ES by Evonik acts as a processing aid. It is an ester grade based on fumed silica. It controls depolymerization and recrystallization behavior. It increases melt viscosity, melt strength... view more

AEROBATCH® U 125 ET is a processing aid by Evonik. It increases melt viscosity, melt strength as well as crystallization temperature and speed. It is an ester grade based on fumed silica. It... view more

Dabco® BL-11 by Evonik is an active amine catalyst. It is designed for all types of flexible foam and extrusion blow molding applications. It is suitable for thermoplastic polyurethane... view more

Dabco® BL-13 by Evonik is a catalyst based on (2-dimethylamino ethyl) ether. Used in flexible foams. Dabco® BL-13 is designed for extrusion blow molding... view more

Dabco® BL-17 by Evonik is a delayed-action catalyst. Used in energy absorbing non-recoverable rigid foams. Dabco® BL-17 is suitable for thermoplastic polyurethane and extrusion blow molding... view more

Dabco® BLV by Evonik is a blend of blowing and gelling amine catalyst. Used in flexible slabstock foams and extrusion blow molding applications. Dabco® BLV offers superb catalytic activity... view more

Dabco® Crystalline by Evonik is a crystalline, 100% solid triethylene diamine (TEDA)-based catalyst with high-purity. Used in all types of polyurethane foams including flexible slabstock, flexible... view more

Dabco® DC2525 by Evonik acts as a silicone stabilizer and emulsifier. Used in cold cure flexible molded MDI and MDI/TDI polyurethane systems. Dabco® DC2525 is suitable for processing by extrusion... view more

Dabco® DC2584 by Evonik is a high efficiency surfactant and foaming agent. Designed for flexible molded foam applications, MDI and MDI/TDI cold cure systems. It has a low fogging potential... view more

Dabco® DC5043 by Evonik is a low viscosity emulsifier based on a silicone glycol copolymer. Used in high-resiliency flexible polyurethane foams. Provides non-hydrolyzable bonding and is suitable for... view more

Dabco® DC5164 by Evonik is a high-efficiency silicone surfactant. Used for cold cure flexible molded polyurethane foam systems. Suitable for extrusion blow molding applications. Offers very good... view more

Dabco® DC5258 by Evonik acts as an emulsifier based on silicone glycol. Used in a variety of cold cure flexible molded and semi-flexible polyurethane foam systems. Suitable for thermoplastic... view more

Dabco® DC5357 by Evonik is non-hydrolyzable silicone emulsifier. Used for water co-blown rigid polyurethane foams and extrusion blow molding applications. Offers very good foam flowability and... view more

Dabco® DC5598 by Evonik is a non-hydrolyzable emulsifier. Used in rigid polyurethane & polyisocyanurate foam and extrusion blow molding applications. Offers good compatibility with common rigid foam... view more

Dabco® DMDEE by Evonik is an amine blowing catalyst. It is 100% dimorpholinyldiethylether (DMDEE). Used in rigid foam sealant systems as well as for flexible slabstock foams. Dabco® DMDEE is suitable... view more

TEGOMER® PP-Si 401 by Evonik is a Organomodified siloxane (OMS). Provides cut elongation prevention, good welding properties, increased impacted strength and improved intrinsic viscosity. Used as a... view more

Organomodified siloxane (OMS). Used as a processing aid for extrusion, injection- and blow molding, a surface modifier for thermoplastics and elastomeric polymers... view more

Organomodified siloxane (OMS). Used as a processing aid for extrusion, injection- and blow molding, a surface modifier and a polymer properties enhancer for thermoplastics and elastomeric polymers... view more

Dabco® BL-22 by Evonik is amine-based catalyst. Dabco® BL-22 is used in semi-flexible molded foam, integral skin, microcellular systems and a wide variety of rigid foams. Dabco® BL-22 is designed... view more

Dabco® DC2517 by Evonik is silicone surfactant. It provides lower fogging performance. It exhibits improved cell opening. It is designed for use in blow molding... view more