Solvent-based products. Nonflammable dispersion of PTFE articles. Gives the following benefits : multiple release cycles, no transfer to molded parts, no interference with post finishing and... view more

Colloidal dispersion of PTFE particles in water. Provides a durable, dry, colorless film and lubricant coating. Supplies a semi-permanent release surface. Provides the following benefits : multiple... view more

McLube® 1725L by McLube is a release agent and general-purpose dry film lubricant. Exhibits low friction and very good anti-stick characteristics. Furnishes a release coating for all types of rubber... view more

Rhenodiv® MR-30/1 by Rhein Chemie Additives (Lanxess Group) is a mold release agent for natural- and synthetic rubber vulcanizates. It is a dispersion of an alkali salt of a fatty acid derivative in... view more

Sulfur. Used for the vulcanization of SBR and natural rubber latex... view more

Octocure 462 by Tiarco Chemical is zinc oxide (60% aqueous dispersion). It is manufactured by French process. It is commonly used pigment and accelerator for the vulcanization of rubber. It is well suited... view more

N,N'-diphenylthiourea. Used as a fast-curing accelerator for natural rubber latex... view more

Octocure 750 by Tiarco Chemical is a 61.8 % active dispersion of rubbermaker’s sulfur, milled to uniformly small particle size for optimum activity. Recommended use level is 2.0 - 3.0 parts per hundred of... view more

Octocure 803 BY Tiarco Chemicals is a zinc oxide dispersion. Acts as a vulcanizing agent. Commonly used ingredient for the pigmenting and vulcanizing of latex rubber. Normal use level is 1.0 - 4.0... view more

Zinc Oxide Dispersion by Vanderbilt Chemicals is the dispersed form of zinc oxide permits its direct incorporation into latex compounds. Zinc oxide at 0.5 to 6.0 phr is used to activate the cure of NR, SBR, and NBR latex... view more