Dry ground muscovite mica recommended when whiteness or coloration are important factors. Insoluble in water, only attacked by hydrofluoric acid, good arc resistance and transparent to microwaves... view more

Exolit® AP 423 by Clariant is a fine-particle ammonium polyphosphate. Acts as a flame retardant. It is a biodegradable, non-hygroscopic and non-flammable white powder. It is halogen-free. It has low... view more

Exolit® AP 740 by Clariant is a non-halogenated flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. It differs in its mode of... view more

Exolit® AP 740 F by Clariant is an ammonium polyphosphate. Acts as a halogen-free, flame retardant. Exhibits intumescence and low smoke density. It is very effective in methacrylate-styrene... view more

Exolit® AP 740 S by Clariant is an intumescent, halogen-free ammonium polyphosphate. Acts as a flame retardant. Compatible with the unsaturated polyester resin, acrylic resin, epoxy or phenolics. It... view more

DAIFREE FB-962 by Daikin is an internal mold release agent. It is free from PFOA and PFOS. It offers excellent anti-sticky performance, improved roll processability and surface modification. It is... view more

DAIFREE GA-3000 by Daikin is an aerosol fluorocarbon mold release agent. It is a solvent-based semi-permanent grade. It is free from PFOA and PFOS. It shows enhanced performance for rubber products... view more

DAIFREE GA-9750 by Daikin is a PFOA- & PFOS-free, aerosol fluorocarbon mold release agent. It is solvent-based and does not contain silicone. It offers little transfer and no stickiness. It is... view more

DAIFREE GF-700 by Daikin is a solvent-based fluorocarbon mold release agent combined with silicone. It is free from PFOA and PFOS. It shows compatibility in SBR, NBR, EPDM, FKM, CR, ACM, epoxy... view more

DAIFREE GF-750 by Daikin is a solvent-based fluorocarbon mold release agent combined with silicone. It is free from PFOA and PFOS. It produces a thin, even film, making it ideal for the release of... view more

2',3-bis [[3-[3,5-di-tert-butyl-4-hydroxyphenyl]propionyl]] propionohydrazide. It is a kind of metal deactivator, which can be used either independently or together with antioxidant. OMNISTAB AN... view more

2-hydroxy-4-n-octoxybenzophenone. Acts as a UV absorber. It protects polymers from UV radiation and helps to preserve the original appearance and physical integrity of molded articles, films... view more

Chinox® F57 by supplier} is benzenamine, N-phenyl-, reaction products with 2, 4, 4-trimethylpentene. Acts as an excellent co-stabilizer. Provides stabilization of the polyol that protects against... view more

Aminoethylaminopropylsilane triol homopolymer in water, 22% actives. Improves adhesion to inorganic material, like glass (alternative to Xiameter® OFS-6020)... view more

XIAMETER™ MEM-1581 Emulsion by Dow gives hydrophobicity for glass and mineral wool. This aqueous emulsion of polydimethyl siloxane shows good water repellency. It is compatible with most phenolic... view more

Coupling agent and adhesion promoter. It is soluble in solvents such as methanol, isopropanol, methoxypropanol and xylene. It can also be dissolved in an aqueous alcohol mixture. Used to improve... view more

TS 1100 by Ecopower Chemical is ?-Aminopropyl triethoxyl silane (content more than 98%). Acts as a coupling agent. It contains two different functional groups - amino and oxethyl in its molecule. It is... view more