Adimoll® BO is benzyl octyl adipate. Acts as a plasticizer. It is characterized by low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial... view more

Disflamoll® TOF by Lanxess is tris (2-ethylhexyl) phosphate (TOP). Acts as a plasticizer. It is also used as a solvent in the production of hydrogen peroxide, as a carrier for pigments in the... view more

Mesamoll® by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more

Mesamoll® II by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more

Uniplex 262 is a 1,4-cyclohexanedimethanol dibenzoate. It is a non-phthalate dibenzoate plasticizer and modifier for a wide range of polymers. Improves overall performance properties here, i.e... view more

N-oxydiethylene thiocarbamyl-N-oxydiethylene sulfenamide (78-82% active). Acts as an efficient di-thiocarbamyl based accelerator that produces shorter cross links which improves compression set... view more

This ultra-accelerator may increases the scorch safety. Creates shorter sulfur-sulfur crosslinks in rubber vulcanizates... view more

Tetrabenzylthiuram disulfide. Acts as a fast curing primary or secondary accelerator. Offers longer scorch times. Low to no nitrosamine generating; not carcinogenic. Used for rubbers like NR, SBR... view more

DP-45™ by Lanxess is a halogenated, flame retardant for polyvinylchloride and elastomers including SBR, neoprene and EPDM. It is extremely effective in PVC jacketing for wire and cable meeting the... view more

DPG® by Lanxess is diphenyl guanidine-based primary or secondary accelerator in natural rubber, SBR, nitrile and butyl for thick walled rubber articles. It is a non-staining, non-discoloring... view more

Ethyl Tuex® by Lanxess is tetraethylthiuram disulfide-based accelerator with a sharp curing range with normal to high sulfur levels. Used in natural, butyl and nitrile (e.g., paracril) rubbers... view more

Mixture of triisobutylene, diisobutylene (2,4,4-trimethylpentene), 4,4'-(Methylethylidene) bisphenol (Bisphenol A). Acts as an antioxidant. Exhibits superior long-term thermal stability... view more

Mixture of triisobutylene, diisobutylene (2,4,4-trimethylpentene) and 4,4'-(Methylethylidene) bisphenol (Bisphenol A) based additive. Acts as antioxidant. Exhibits superior long-term thermal... view more

Mixture of silica, triisobutylene, diisobutylene (2,4,4-trimethylpentene), 4,4'-(Methylethylidene) bisphenol (Bisphenol A). Acts as and antioxidant. Exhibits superior long-term thermal stability... view more

Kronitex® CDP by Lanxess is a naturally derived, phosphorus flame retardant. This triaryl phosphate ester based on phenol and cresol is used in PVC applications. It finds utility in synthetic... view more

Mesamoll® TP LXS 51067 by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more

Porofor® ADC M-C1 by Lanxess is a low-dust, organic chemical blowing agent. It offers small particle size, excellent cost performance and leads to whiter foams. It is suitable for the production of... view more

Porofor® ADC/L2 by Lanxess is a blowing agent for the production of polymer foam. It imparts very good cost/performance ratio. It is used in ABS, EVA, PE, PP, PS, PVC, NR, SBR, EPDM, NBR and... view more

Santoweb® D by Lanxess is a treated cellulose fiber product that provides reinforcement for uncured and cured rubber compounds. It increases product stiffness, green strength and reduces die swell... view more

Tuex® by Lanxess is tetramethylthiuram disulfide-based standard accelerator with sulfur for nitrile, butyl and EPDM rubbers. It offers short curing range in NR... view more