HALLCO® LUBE by Hallstar is an anti-tack agent. It is a fatty acid soap solution. It can also be used as a lubricant. It provides a transparent anti-stick coating to a wide range of elastomers. It... view more

HALLCOTE® 466 by Hallstar is a slip agent. It is recommended for TPE/TPV. It is an aqueous clay dispersion... view more

HALLCOTE® 780 by Hallstar is designed to provide an excellent anti-stick coating to a wide range of elastomers, especially highly plasticized or very low durometer and cold-flow compounds. It is... view more

HALLCOTE® 910-LF by Hallstar acts as an anti-tack & release agent. It is a clay-based slurry. It is designed to provide an excellent anti-stick coating to a wide range of elastomers, especially highly... view more

HALLCOTE® CAST 50 by Hallstar acts as an anti-tack agent. It possesses excellent release properties and readily mixes with cold water. HALLCOTE® CAST 50 compatible with most elastomers and is used in air cooled... view more

HALLCOTE® G by Hallstar is a non-zinc, proprietary slurry-based release agent... view more

HALLCOTE® S-90 by Hallstar is non-zinc, proprietary slurry-based release agent. It is recommended for rubbers... view more

HALLCOTE® S-90 E by Hallstar is a pigmented slab dip. It is recommended for rubbers... view more

HALLCOTE® ZS 50/50 by Hallstar acts as an anti-tack agent. It is a non-pigmented zinc stearate dispersion. It is blended with special surfactants that allow them to remain evenly dispersed in water when... view more

QUIKOTE® by Hallstar is designed to provide a waterproof anti-stick, that will not interfere with molding operations. It is non-pigmented zinc stearate dispersion. It dries quickly, readily mixes... view more

QUIKOTE® C-LM by Hallstar is designed to provide an immediate waterproof anti-stick coating that will not interfere with molding operations. It is calcium stearate dispersion. This material can be... view more

QUIKOTE® C-LM Wet by Hallstar is designed to provide low dust anti-stick coating, which will not interfere with molding operations. It is quick drying non-pigmented calcium stearate dispersion. It has... view more

QUIKOTE® C-LM/LD by Hallstar is designed to provide an immediate waterproof anti-stick coating that will not interfere with molding operations. This material can be used effectively on a wide range of... view more

QUIKOTE® C/CA by Hallstar is calcium stearate dispersion-based anti-tack agent. It is recommended for rubber... view more

SUPRMIX® EPON 828 by Hallstar is a tackifier, cross-linker and adhesion promoter in rubber and epoxy resin. It is used in composites, chemical resistant tank linings, grouts, electrical applications... view more

SUPRMIX® PARAPLEX G-25 by Hallstar is a plasticizer which is a polyester sebacate. It exhibits very good resistance to extraction in/by gasoline, oils, detergents and soapy water. It offers freedom from... view more

SUPRMIX® PLASTHALL® A-9000 by Hallstar is polymeric phthalate-based plasticizer. It is used in hose and tubing, pool liners, PVC film and gaskets, polar fluids and humid environments. Provides very good extraction... view more

Wet Zinc® by Hallstar is an antitack agent. It is non-pigmented zinc stearate dispersion. It is designed to provide a non-dusting semi-transparent or transparent anti-stick coating, which will not... view more

Wet Zinc® Plus by Hallstar is used as an anti-tack agent which is zinc stearate. It is recommended for rubber... view more

ZINCOTE® by Hallstar is an anti-tack agent which is zinc stearate. Recommended for rubber... view more