Preparation of zincdialkyldithiophosphate and amine,70 % adsorbed on silica. Used as vulcanization accelerator for rapid cure of EPDM and diene rubber. Provides low compression set as well as very... view more

GETREN® R 4200 by Evonik acts as a silicone oil-free release agent. Provides excellent sliding properties with no negative impact on the physical properties of the rubber. Designed for EPDM, NBR and... view more

GETREN® R 4230 by Evonik acts as a release agent for automotive rubber hoses. Offers easy washability, temperature stability, excellent biodegradability i.e. potential cost savings in waste water... view more

GETREN® R 4280 designed by Evonik is a release agent for automotive rubber hoses. It is a silicone oil-free additive recommended for EPDM and NBR. Also suitable for silicone, FKM and PVC. Offers... view more

GETREN® R 4600 by Evonik acts as a release agent for automotive rubber hoses. It doesnot contain silicone oil and is recommended for chlorinated and epichlorohydrin/ chloropolyethylene rubber. Offers... view more

GETREN® R 4700 by Evonik is a release agent designed for automotive rubber hoses. Offers easy washability, temperature stability, excellent biodegradability i.e. potential cost savings in waste... view more

BactiBlock® 920 B4 supplied by FARRL is an antimicrobial additive suitable to be used in a broad variety of polymeric products like thermosets, thermoplastics, elastomers and rubber. The product is... view more

KESAPLAST 8500 supplied by FARRL is dioctyl terephthalate (DOTP) used as a high molecular weight (monomeric) plasticizer. It offers an excellent plasticizing effect, excellent processing performance... view more

Ken-React® KR® 12 supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with phosphato functionality. It has low viscosity and solid content of min. 95%. It can be used in... view more

Ken-React® KR® 138S supplied by FARRL is a titanate product based on titanium IV, class oxyacetate chelate, with pyrophosphate functionality. It has low viscosity and solid content of min. 99%. It... view more

Ken-React® KR® TTS supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with isostearoyl functionality. It has low viscosity and solid content of min. 95%. It helps in... view more

Nurchem TDEC-75 by Nanjing Union Rubber Chemicals is a tellurium tetra-diethyldithiocarbamate-based primary or secondary accelerator for EPDM, NR, SBR, NBR, CR and IIR. It can be used with thiurams... view more

Carbon black. Used as reinforcing filler. Provides very good surface smoothness. Offers very good processability during extrusion, injection molding and calendering. Exhibits low compression set... view more

Rhenocure® TP/S by Rhein Chemie Additives (Lanxess Group) is a non-staining special accelerator for the rapid vulcanization of compounds based on EPDM and other diene rubbers. It shows good flow and... view more

Rhenocure® ZBOP/S by Rhein Chemie Additives (Lanxess Group) is a non-staining specialty accelerator for rapid vulcanization of EPDM and other diene rubbers for N-nitrosamine free curing. It exhibits... view more

Rhenogran® ADT-50 by Rhein Chemie Additives (Lanxess Group) is a non-staining special accelerator for the rapid vulcanization of sulfur-cured elastomer. It exhibits high moduli and tensile strength... view more

Rhenogran® PbO-80 by Rhein Chemie Additives (Lanxess Group) is a curing activator and stabilizer for chlorosulfonated polyethylene and chloroprene rubber. It also suitable as filler in compounds for... view more

Vulkalent® G by Rhein Chemie Additives (Lanxess Group) is a highly effective retarder used for compounds based on NR, IR, BR, SBR (including oil-extended SBR), NBR, IIR and EPDM. It extends the... view more