Silane in LLDPE carrier resin (70%). Acts as a crosslinking masterbatch. It shows excellent mechanical properties and outstanding chemical resistance. It prevents premature polymerization of the... view more

Silane in PP carrier resin (25%). Acts as a crosslinking masterbatch. It shows excellent mechanical properties and outstanding chemical resistance. It prevents premature polymerization of the... view more

BactiBlock® 920 B0 supplied by FARRL is an antimicrobial additive suitable to be used in compounding of a broad variety of polymeric products like polyolefins or others to be used in food contact... view more

BactiBlock® 920 B4 supplied by FARRL is an antimicrobial additive suitable to be used in a broad variety of polymeric products like thermosets, thermoplastics, elastomers and rubber. The product is... view more

Ken-React® KPR® REZYK-1280 Powder supplied by FARRL is based on 78% of a monoalkoxy titanate ester compound with an aluminum co-catalyst on silicon dioxide as absorbing carrier. It acts as a co- and... view more

Ken-React® KR® 12 supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with phosphato functionality. It has low viscosity and solid content of min. 95%. It can be used in... view more

Ken-React® KR® 138S supplied by FARRL is a titanate product based on titanium IV, class oxyacetate chelate, with pyrophosphate functionality. It has low viscosity and solid content of min. 99%. It... view more

LUVOBATCH® EV BA 5335 by Lehmann & Voss is an exothermic blowing agent. It is a dust-free, low-cost masterbatch microgranulate form. It exhibits controlled foaming process, good dispersion, improved heat "> It... view more

LUVOBATCH® PE BA 5821 by Lehmann & Voss is an endothermal blowing agent. It offers shorter cycle times, streaking reduction, decorative effects, avoidance of post-inflation, safe dosage and good dispersion. It is a... view more

LUVOBATCH® PE BA 5823 by Lehmann & Voss is a dust-free, low-cost endothermal blowing agent. It exhibits controlled foaming process, improved heat "> It has higher dosing quantities compared to exothermic TMs. It... view more

LUVOBATCH® PE BA 7038 by Lehmann & Voss is an exothermic blowing agent. It exhibits controlled foaming process, improved heat "> It offers decorative effects, reduction of cycle time through reduction of melt... view more

LUVOBATCH® PE BA 9538 by Lehmann & Voss is an endothermal blowing agent. It is suitable for polyethylene (PE), polypropylene (PP), ethylene vinyl acetate (EVA), polystyrene (PS) and others. It exhibits controlled... view more

POLYBATCH® UVR 95 by LyondellBasell is an UV-stabilizer masterbatch. It is a polymeric steric hindered amine in a low melt LDPE. The degradation speed depends on climatic conditions, thickness... view more

PPA PE F5 by Manntek is polymer processing aid masterbatch. It is made of 5% of fluoropolymer and LLDPE as a carrier. It is suitable for PE extrusion applications such as PE film (LDPE/LLDPE)... view more

PPA PP F5 by Manntek is polymer processing aid masterbatch. It is made of 5% of fluoropolymer and PP homopolymer as a carrier. It is suitable for PP films (OPP, BOPP), sheets, fibers, filament and... view more

Cel-Span® Process Aid 305 contains a powerful water-seeking additive that chemically combines and eliminates lensing and porosity in blown as well as cast extrusion, injection, compounding, and... view more