Anti UV masterbatch containing blend of polymeric HALS additives in a MFI 7 LDPE carrier. It contains additives with very low volatility and can be used in both cast and blown film processes. It can... view more

UV 32 by Polytechs is anti UV masterbatch containing a blend of polymeric HALS additives in an MFI 7 LDPE carrier. It is mainly used to give UV protection to polyethylene films. No... view more

High load slip additive concentrate. Engineered for superb dispersion and superior slip characteristics. Used for blown and cast mono- and multilayered film applications... view more

Antifog concentrate. Exhibits minimal effect on surface properties such as heat seal strength and coefficient of friction. Used for polyethylene film applications... view more

Anti-fog concentrate. Optimized for a 3% letdown in LDPE and LLDPE. Used in blown and cast film applications... view more

VS- E09 by Polyvel is non-amine anti-static masterbatch with LDPE as a carrier resin. It reduces the film’s surface resistivity (increases conductivity) because a hygroscopic, conductive... view more

Non-amine anti-static masterbatch with LDPE as a carrier resin. It also contains antiblock additive. It reduces the film’s surface resistivity (increases conductivity) because a hygroscopic... view more

CRYSTALADD® HM-237 by Ravago Manufacturing Americas is a highly efficient nucleating agent. It is designed for polyethylene film, extrusion, blow molding and injection molding resins. It offers improved clarity in films... view more

CRYSTALADD® HM-237B by Ravago Manufacturing Americas is a highly efficient nucleating agent. It provides faster cycle times, lower shrinkage, and higher barrier properties. It is designed for polyethylene film, extrusion and... view more

CRYSTALADD® HM-237E by Ravago Manufacturing Americas is a highly efficient nucleating agent and processing aid. It also contains a mineral additive. It can improve film properties and yield rates in LLDPE. It is designed to be... view more

CRYSTALADD® HM-664 by Ravago Manufacturing Americas is a nucleating masterbatch. It is designed to reduce cycle time in injection molded polyethylene parts, improve stiffness, HDT, and reduce or improve warpage challenges... view more

EXTINITY® 0201-132 by SACO AEI Polymers is a non-blooming, highly loaded, UV-stabilized flame retardant concentrate for a letdown in polyethylene resin systems. It is suitable for extrusion... view more

EXTINITY® 0201-171 by SACO AEI Polymers is a highly loaded, flame-retardant concentrate. It has been designed to be used as a cost-effective flame retardant for film products made with polyethylene... view more

EXTINITY® 0201-312 by SACO AEI Polymers is a highly loaded antimony trioxide concentrate. It is suitable for extrusion applications including tubing, coating, sheet, profile, blown- and cast film... view more

Active Plus™ PA17L by SCG Chemicals is a fluorinated processing aids masterbatch which is specially designed to use with polyolefin based polymer and also effective for many other applications which require a... view more

Active Plus™ SB31L by SCG Chemicals is a slip & antiblock masterbatch which specifically designed to use with polyolefins. It has an optimal ratio between slip agent and antiblock agent. The synergized effect... view more

Active Plus™ SB32L by SCG Chemicals is a slip & antiblock masterbatch which specifically designed to use with polyolefins. It provides an optimal mix between Slip agent and antiblock agent, achieving a... view more

Sinpolene MBN7052 by Teknor Apex is a low-density polyethylene-based slip agent. This concentrate contains 5% slip agent for reducing the coefficient of friction of polyolefins. Sinpolene MBN7052 is... view more