Polymers to be release : fluorocarbon, blends, butyl. Typical application : oil seals, nitrile. Recommended aerosol... view more

Enox® YNE by Chinasun Specialty Products is a low-volatile, yellow liquid dialkyl peroxide. It acts as a crosslinking of polymer (silicone rubber, EPDM, PE etc). It is used as a modification agent... view more

DAIFREE GF-700 by Daikin is a solvent-based fluorocarbon mold release agent combined with silicone. It is free from PFOA and PFOS. It shows compatibility in SBR, NBR, EPDM, FKM, CR, ACM, epoxy... view more

DAIFREE GF-750 by Daikin is a solvent-based fluorocarbon mold release agent combined with silicone. It is free from PFOA and PFOS. It produces a thin, even film, making it ideal for the release of... view more

DAIFREE GW-4010 by Daikin is a PFOA- & PFOS-free, water-based mold release agent combined with silicone. It produces a thin, even film, making it ideal for the release of precision components. It is... view more

DAIFREE GW-4510 by Daikin is a water-based fluorocarbon mold release agent that does not contain silicone. It is free from PFOA and PFOS, and produces a thin, even film, making it ideal for the... view more

DAIFREE MS-600 by Daikin is a semi-permanent, solvent-based, fluorocarbon mold release agent. It free from PFOA and PFOS. It is applicable in SBR, NBR, EPDM, FKM, CR, ACM, PE-, PP-, PVC- and ABS... view more

VS-172 by Ecopower Chemical is vinyltris(2-methoxyethoxy) silane (content is greater than 98%). Acts as a coupling agent. It enhances the electrical specification and mechanical strength of EPDM (filled... view more

Dynasylan® 6490 by Evonik acts as an excellent compatibilizer between inorganic fillers (e.g.kaolin , MDH , ATH) and organic polymers (e.g EPDM , EVA , PE). Offers improved filler dispersion and... view more

Dynasylan® 6498 by Evonik is a very good compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). Offers improved filler dispersion and good... view more

Dynasylan® 6598 by Evonik acts as a compatabilizer. Used between inorganic fillers like Kaolin, MDH, ATH and organic polymers including EPDM, EVA and PE. Provided improved heat resistance, higher... view more

Ken-React® KR® 12 supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with phosphato functionality. It has low viscosity and solid content of min. 95%. It can be used in... view more

Ken-React® KR® TTS supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with isostearoyl functionality. It has low viscosity and solid content of min. 95%. It helps in... view more

Antioxidant for rubber and latex products. Improves anti-heating aging. Used as the stabilitizer of natural rubber and synthetical rubber such as styrene-butadiene rubber, butadiene chloride rubber... view more

3-(Dimethoxymethylsilyl) propyl methacrylate. It acts as a coupling agent, strengthening agent and cross-linking promoter. Exhibits easy hydrolysis and condensation to form polysiloxane, easy... view more

Saret® 1110 Dry liquid by Sartomer (Arkema) is a methacrylate. Acts as a crosslinking co-agent/curing agent. Offers scorch protection, low compression set, temperature stability, high elongation... view more

Longmore V172 by Shanghai LanMone New Material Technology is a vinyltris(2-methoxyethoxy)silane. It acts as a silane coupling and cross-linking agent. It can be diluted in methanol, ethanol... view more

KBE 1003 by Shin-Etsu is vinyltriethoxysilane. Used as a coupling agent for polyethylene, polypropylene, diallylphtalate, unsaturated polyester, sulfur-crosslinked EPM and peroxide crosslinked... view more

KBE 502 by Shin-Etsu is 3-methacryloxypropylmethyldiethoxysilane. Used as a coupling agent for polyethylene, polypropylene, polystyrene, acryl, polycarbonate, urethane, ABS, diallylphtalate... view more

KBE 503 by Shin-Etsu is 3-methacryloxypropyltriethoxysilane. Used as a coupling agent for polyethylene, polypropylene, polystyrene, acryl, polycarbonate, urethane, ABS, diallylphtalate... view more