PEG-300 by Jiangsu Dynamic Chemical is polyethylene glycol. It acts as a lubricant, plasticizer & wetting agent. PEG-300 is recommended for fiber processing, pottery, metal processing and rubber... view more

PEG-400 by Jiangsu Dynamic Chemical is polyethylene glycol. It acts as a lubricant, plasticizer & wetting agent. PEG-400 is suitable for fiber processing, pottery, metal processing and rubber... view more

PEG-600 by Jiangsu Dynamic Chemical is polyethylene glycol. It acts as a lubricant, plasticizer & wetting agent. PEG-600 is suitable for fiber processing, pottery, metal processing and rubber... view more

Haftolat by Kettlitz Chemie is an EPM solution. Functions as internal lubricants and give excellent results even at small dosage. Shows excellent results, especially in rubber compounds with high shore... view more

Adimoll® BO is benzyl octyl adipate. Acts as a plasticizer. It is characterized by low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial... view more

Mesamoll® by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more

Mesamoll® II by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more

Ultramoll® IV by Lanxess is adipic acid polyester. Acts as a polymeric plasticizer. It offers good extraction resistance to oils, migration resistance in contact with other plastics, thermostability... view more

Ultramoll® V is adipic acid polyester. Acts as a polymeric plasticizer. It is migration-resistant and resistant to extraction by oil, aliphatic hydrocarbons and water. It is soft and flexible even... view more

Monomeric plasticizer derived from renewable vegetable raw material and absolutely free of phthalic derivatives in its composition. It presents high solvation and is recommended to several... view more

NEWPOL 50HB-2000 by Sanyo Chemical Industries is poly (oxyethylene, oxypropylene) glycol monoalkyl ether. Acts as a release agent. NEWPOL 50HB-2000 is suitable for high speed tire molding and foam rubber... view more

NEWPOL LB-1715 by Sanyo Chemical Industries is polyoxypropylene glycol monoalkyl ether. It also acts as a release agent and causes no- swelling & shrinkage of natural or synthetic rubbers. NEWPOL LB-1715 is suitable for... view more

NEWPOL LB-625 by Sanyo Chemical Industries is polyoxypropylene glycol monoalkyl ether. It acts as a release agent. NEWPOL LB-625 is suitable for high-speed tire molding and foam rubber... view more

Saret® 1110 Dry liquid by Sartomer (Arkema) is a methacrylate. Acts as a crosslinking co-agent/curing agent. Offers scorch protection, low compression set, temperature stability, high elongation... view more

STRUKTOL® HT 750 by Struktol is a processing additive for diamine cured special elastomers like vamac, HT-ACM or HNBR in either carbon black and/or white filled compounds. It is used in mixing... view more

Alkyl sulfonic acid phenyl ester. It shows good compatibility with a large number of polymers such as thermoplastic polyurethane (PU), polyvinyl chloride (PVC), natural rubber (NR)... view more

Sulfur-free organotin compound. It acts as a stabilizer for rigid PVC (polyvinyl chloride) and catalyst for PU (polyurethane). Applications include coated fabrics, rigid films, profiles, sheets and... view more