ACCUREL® GA303 by Evonik is a cell stabilizer, especially for EVA foams. Provides fast anti-static performance for polyolefin-based films, sheets or injection molded parts. It delays the exchange of... view more

ACCUREL® SF 660 by Evonik functions as a slip agent. Provides good release properties to injection molded PP/PE/EVA-based parts. It reduces the coefficient of friction at temperatures below 60°C... view more

GETREN® M 2000 by Evonik acts as a release agent. It forms a uniform film on the mold with no negative impact on the surface. Designed for compression, rubber parts, drive belts and conveyor belts... view more

GETREN® M 2200 by Evonik is a release agent. It forms a uniform film on the mold with no negative impact on the surface. Designed for compression, rubber parts, drive belts and conveyor belts... view more

GETREN® M 2235 acts as a release agent by Evonik. Designed for compression, rubber parts, drive belts and conveyor belts. It forms a uniform film on the mold with no negative impact on the surface... view more

GETREN® M 2300 by Evonik is a release agent designed by Evonik for rubber parts. It forms a uniform film on the mold with no negative impact on the surface. Suggested for compression, drive belts and... view more

GETREN® M 2500 by Evonik is a release agent for silicone oil-based and silicone oil-free formulations. Designed for compression, rubber parts, drive belts and conveyor belts. It allows easy... view more

GETREN® M 2600 by Evonik is a release agent for easy demolding. Offers both silicone oil-based and silicone oil-free formulations. Suitable for elastomer, polymers and plastic including latex... view more

TEGOMER® PP-Si 401 by Evonik is a Organomodified siloxane (OMS). Provides cut elongation prevention, good welding properties, increased impacted strength and improved intrinsic viscosity. Used as a... view more

Organomodified siloxane (OMS). Used as a processing aid for extrusion, injection- and blow molding, a surface modifier for thermoplastics and elastomeric polymers... view more

Organomodified siloxane (OMS). Used as a processing aid for extrusion, injection- and blow molding, a surface modifier and a polymer properties enhancer for thermoplastics and elastomeric polymers... view more