ACCUREL® FR504 by Evonik is a halogen-free, flame retardant agent. Exhibits high concentrate for extruded or injection molded components and profiles made from styrenic resins and compounds. It is... view more

ACCUREL® FR519 by Evonik is a halogen-free, 50% flame retardant masterbatch. It is based on polycarbonate carrier resin. Suitable for injection molded components and profiles made from PC or PC/ABS... view more

ACCUREL® GA301 by Evonik is a fast working anti-static agent and 50% glycerol monostearate-based masterbatch in LDPE carrier resin. Acts as a mold release agent and exhibits fast migration. Suitable... view more

ACCUREL® GA303 by Evonik is a cell stabilizer, especially for EVA foams. Provides fast anti-static performance for polyolefin-based films, sheets or injection molded parts. It delays the exchange of... view more

ACCUREL® SF 261 by Evonik acts as a semi-permanent, internal anti-static agent. It is a saturated alkyl(C16-C18) bis(2-hydroxyethyl) amine on LLDPE. Designed for PP and PE films or injection molded... view more

ACCUREL® SF 617 is a high purity slip agent by Evonik. It reduces the coefficient of friction at temperatures below 60°C. Provides smoother surface appearance and better internal melt flow. Suitable... view more

ACCUREL® SF 660 by Evonik functions as a slip agent. Provides good release properties to injection molded PP/PE/EVA-based parts. It reduces the coefficient of friction at temperatures below 60°C... view more

ACCUREL® SF1710 by Evonik acts as an antiblocking as well as a mold release agent. It is a mixture of refined primary stearamide and general-purpose polystyrene (GPPS). Suitable for films, sheets... view more

ACCUREL® SF1760 by Evonik acts as a release agent, anti-blocking agent and cell stabilizer. It can be incorporated using normal dosing equipment or by adding it to a dry blend with virgin polymer... view more

ACCUREL® Si714 by Evonik is a lubricant. It is polydimethylsiloxane based on LDPE carrier resin. Provides release effects in case of injection molding. It is recommended at a dosage level of 0.1-0.3... view more

AEROBATCH® U 125 ES by Evonik acts as a processing aid. It is an ester grade based on fumed silica. It controls depolymerization and recrystallization behavior. It increases melt viscosity, melt strength... view more

AEROBATCH® U 125 ET is a processing aid by Evonik. It increases melt viscosity, melt strength as well as crystallization temperature and speed. It is an ester grade based on fumed silica. It... view more

GETREN® CAS by Evonik is a wax-based release agent. Used in melamine resins for injection molding applications. Also used for demolding of semi-finished products. It contains a non-ionic emulsifier... view more

GETREN® M 2000 by Evonik acts as a release agent. It forms a uniform film on the mold with no negative impact on the surface. Designed for compression, rubber parts, drive belts and conveyor belts... view more

GETREN® M 2200 by Evonik is a release agent. It forms a uniform film on the mold with no negative impact on the surface. Designed for compression, rubber parts, drive belts and conveyor belts... view more

GETREN® M 2235 acts as a release agent by Evonik. Designed for compression, rubber parts, drive belts and conveyor belts. It forms a uniform film on the mold with no negative impact on the surface... view more

GETREN® M 2300 by Evonik is a release agent designed by Evonik for rubber parts. It forms a uniform film on the mold with no negative impact on the surface. Suggested for compression, drive belts and... view more

GETREN® M 2500 by Evonik is a release agent for silicone oil-based and silicone oil-free formulations. Designed for compression, rubber parts, drive belts and conveyor belts. It allows easy... view more

GETREN® M 2600 by Evonik is a release agent for easy demolding. Offers both silicone oil-based and silicone oil-free formulations. Suitable for elastomer, polymers and plastic including latex... view more

TEGIN® 90 by Evonik is glycerol monostearate. Used as an antistatic agent in LL/LD-PE, HD-PE and PP for film production and injection molded parts. TEGIN® 90 provides resistivity control... view more