VERSENE™ 220 Crystals by Dow is a chelating agent. This tetrasodium ethylenediaminetetraacetate tetrahydrate offers freight savings over VERSENE™ 100. It also contains less impurities than VERSENE™ 100... view more

Crystex™ HD OT 20 by Eastman is a non-blooming vulcanizing agent for unsaturated elastomers. It retards bin scorch, prevents migration of sulfur and preserves surface tack. It offers improved... view more

Duralink™ HTS by Eastman is an adhesion promoter. It is used in sulfur-based vulcanization systems to generate hybrid cross-links. It further provides increased retention of physical and dynamic... view more

Bluesil™ PI 2074 by Elkem Silicones is a cationic photoinitiator. It is used with epoxy resins, vinyl ethers or any other type of oligomer which polymerizes cationically. Bluesil™ PI 2074 is... view more

AMICURE® UR2T by Evonik is a substituted urea-based accelerator (1,1’-(4 methy-m-phenylene)bis(3,3 dimethyl urea)]) for dicyandiamide-cured epoxy resins. Used in heat-cure composites and prepreg... view more

Amicure® UR7/10 by Evonik is 1-Phenyl 3,3 dimethyl urea-based accelerator. It combines excellent latency at ambient temperature in systems heated above its activation temperature. Possesses rapid... view more

CUREZOL® 2MA-OK by Evonik acts as an accelerator. Offers single package latency from several hours to greater than six months. It also functions as an accelerator in the reaction between epoxy... view more

CUREZOL® 2MZ Azine by Evonik is an accelerator in the reaction between epoxy resins and other curing agents. Exhibits rapid cure beyond activation temperatures. Suggested for casting, potting and... view more

CUREZOL® 2P4MZ by Evonik acts as an accelerator for dicyandiamide, anhydride and phenolic curing agents. Offers single package latency from several hours to greater than six months. Provides high... view more

Micronized sodium benzoate. Acts as a nucleating agent. Improves transparency, gloss, rigidity and HDT. It is cost-effective. Also improves mechanical, optical and thermal characters. It is... view more

HALLBOND® RX-13946-D by Hallstar is an adhesion promoter. It improves rubber to metal adhesion and rubber to synthetic fibers such as polyesters, nylon and aramid. The HALLBOND RX-13946-D provides equal or... view more

HALLCO® CAOP by Hallstar acts as an acid acceptor and neutralizer. It is based on high purity calcium hydroxide and 20% Plasthall® DOP. It is compatible with butyl, fluoroelastomers and natural... view more

MAGCARB® L (RX-13972) by Hallstar is used as a reinforcing agent and translucent filler in rubber and plastic. It is magnesium carbonate. It is also used as a flame retardant and smoke suppressant in... view more

SUPRMIX® PLASTHALL® 226 DBEEA by Hallstar is a plasticizer which is a low molecular weight dibutoxyethoxyethyl adipate dispersed on an amorphous silica carrier. It eliminates drum disposal and eliminates the need for... view more

SUPRMIX® PLASTHALL® P-7046 by Hallstar is a medium to high molecular weight plasticizer. It is polyester glutarate dispersed on an amorphous silica carrier. It is a viscous and hard to handle liquid at room... view more

Esacure 1001 M by IGM Resins is a difunctional Type II photoinitiator. It belongs to ketosulphone class. It is used to initiate radical polymerization of unsaturated oligomers such as acrylates after UV... view more

Esacure A 198 by IGM Resins is a polyfunctional high molecular weight amine. It is co-initiator that when combined with type II photoinitiator gives high speed cure in both clear and pigmented... view more