Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Acts as a plasticizing polymer for improving the resistance of PVC to oil, grease, solvents and... view more

Addolink® THPE by LANXESS is a crosslinking agent for the production of branched polycarbonates. It is suitable for both common production processes the interfacial and the melt process. In the melt... view more

N-oxydiethylene thiocarbamyl-N-oxydiethylene sulfenamide (78-82% active). Acts as an efficient di-thiocarbamyl based accelerator that produces shorter cross links which improves compression set... view more

Tetraisobutylthiuram disulfide (TiBTD). Acts as a thiuram disulfide ultra based accelerator. Increases cure rate. Lengthens scorch time. Inhibits NR reversion. Produces extremely low levels of... view more

4-morpholinyl-2-benzothiazyl disulfide. Acts as a primary accelerator. A sulfur donating, fast curing accelerator. Develops short cross links (high modulus) in low or no sulfur compounds. Used for... view more

Tetrabenzylthiuram disulfide. Acts as a fast curing primary or secondary accelerator. Offers longer scorch times. Low to no nitrosamine generating; not carcinogenic. Used for rubbers like NR, SBR... view more

Expandex® 5-PT by Lanxess is 5-phenyltetrazole-based foaming agent. It is recommended for use with engineering polymers. Its high decomposition temperature helps to eliminate premature decomposition... view more

Genitron® DP 35/22 by LANXESS is a blowing agent. It requires less time for degassing. It is used in injection molding and extrusion products... view more

Genitron® VP KA 9175 by LANXESS is a sodium bicarbonate preparation-based blowing agent. It is used in extrusion processes of rigid PVC, where the use of azodicarbonic acid di-amide is not possible... view more