Adimoll® BO is benzyl octyl adipate. Acts as a plasticizer. It is characterized by low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial... view more

Adimoll® DB is di-n-butyl adipate. Acts as a plasticizer. It is characterized by good compatibility with cellulose derivates. It is used as low-temperature-resistant plasticizer for melt processable... view more

Baymod® PU-A is aliphatic polyester urethane. Acts as a plasticizer. When mixed with PVC, it is oil, grease and solvent resistant, non-volatile, resistant to- abrasion and tear propagation... view more

Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Acts as a plasticizing polymer for improving the resistance of PVC to oil, grease, solvents and... view more

Mersolat® H30 by LANXESS is an anti-static agent. It is a blend of primarily secondary sodium alkyl sulfonates with an average chain length of C15. It reduces the transparency of polymers which would... view more

Mersolat® H40 by Lanxess is a mixture of primarily secondary sodium alkyl sulfonates with an average chain length of C15. Acts as an antistatic agent. The product may also be applied to the surface... view more

Mersolat® H68 by LANXESS is an anti-static agent. It is a blend of primarily secondary sodium alkyl sulfonates with an average chain length of C15. It reduces the transparency of polymers which would... view more

Mersolat® H95 by LANXESS is a mixture of primarily secondary sodium alkyl sulfonates with an average chain length of C15. Acts as an antistatic agent. The product may also be applied to the surface... view more

Mesamoll® by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more

Mesamoll® II by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more

Stabaxol® KE 7646 by LANXESS is an anti-hydrolysis agent for thermoplastic polyesters, especially for PET. It is a polycarbodiimide based masterbatch. It can be used in PET-monofilaments for... view more

Stabaxol® KE 9193 is polycarbdiimide. Acts as an antihydrolysis agent for thermoplastic polyesters, especially for PBT. It is preferably added in a separate stream or dry blended with the polyester... view more

Ultramoll® IV by Lanxess is adipic acid polyester. Acts as a polymeric plasticizer. It offers good extraction resistance to oils, migration resistance in contact with other plastics, thermostability... view more

Ultramoll® V is adipic acid polyester. Acts as a polymeric plasticizer. It is migration-resistant and resistant to extraction by oil, aliphatic hydrocarbons and water. It is soft and flexible even... view more

Ultramoll® V HV is adipic acid polyester. Acts as a polymeric plasticizer. It is migration-resistant and resistant to extraction by oil, aliphatic hydrocarbons and water. It is soft and flexible... view more

Uniplex 260 by Rhein Chemie Lanxess Group is a glyceryl tribenzoate. Acts as a plasticizer and processing aid. It promotes heat-sealability and adhesion, and creates a moisture barrier. It is... view more

Uniplex 512 by Rhein Chemie Lanxess Group is a neopentyl glycol dibenzoate. It is a low melting, waxy, solid plasticizer and processing aid. It has low volatility and a good ultraviolet light... view more

Uniplex 546 is a tris(2-ethylhexyl) trimellitate, TOTM. It is high molecular weight monomeric plasticizer having a low volatility. It is characterized by a low migration, heat resistance and high... view more

Uniplex DIDS is Di-isodecyl Sebacate (DIDS). Acts as a plasticizer. It is low-volatile and combines good low temperature plasticizing performance and low volatility. Compatible with nitrile rubber... view more

Addolink® THPE by LANXESS is a crosslinking agent for the production of branched polycarbonates. It is suitable for both common production processes the interfacial and the melt process. In the melt... view more