Dabco® DC5990 is a high efficiency, non-hydrolyzable surfactant by Evonik. It can provide good nucleation, a high degree of emulsification, excellent froth stability and good bulk stability to... view more

Dabco® DC5LE by Evonik acts as an accelerator. It is a low emission delayed action co-catalyst that strongly promotes the urethane (polyol-isocyanate) reaction while maintaining cream time and... view more

Dabco® DC6070 by Evonik acts as an emulsifier. Possesses ability to eliminate basal cell formation in difficult-to-mold tooling. Offers excellent foam surface appearance and vent stability as well... view more

Dabco® DMDEE by Evonik is an amine blowing catalyst. It is 100% dimorpholinyldiethylether (DMDEE). Used in rigid foam sealant systems as well as for flexible slabstock foams. Dabco® DMDEE is suitable... view more

Dabco® EG by Evonik is an amine-based catalyst. Used in polyurethane formulations. Dabco® EG possesses strong gelation catalysis... view more

Dabco® JXP508 by Evonik is a highly efficient amine catalyst. Based on its trimerization capability, it could provide very good post-curing to foam. Improves adhesion strength of foam to substrate... view more

Dabco® K-15 by Evonik acts as a cost-effective isocyanurate catalyst. It is used in the production of rigid isocyanurate foams. Dabco® K-15 provides high conversion rate... view more

Dabco® K-15LV by Evonik acts as a catalyst. Its low viscosity facilitates ease of pumping at low temperatures. It is cost-effective and offers high conversion rate. Dabco® K-15LV promotes the... view more

Dabco® K2097 by Evonik is a standard trimerization catalyst. Used for rigid foam applications. Dabco® K2097 is suitable for thermoset PU resin... view more

Dabco® LK-221 by Evonik is a unique organic surfactant for microcellular and rigid foam formulations. Provides a smooth surface and excellent adhesion. Can be used as a replacement or co-surfactant... view more

Dabco® LK-443 by Evonik is a unique organic surfactant for use in rigid polyurethane applications to provide a smooth surface. It can be used as a replacement or co-surfactant for silicone-based... view more

Dabco® MB20 by Evonik acts as a co-catalyst with a tertiary amine to accelerate the urethane reaction and cure. Exhibits delayed viscosity build on front-end at low usage level while promoting... view more

Dabco® MP601 by Evonik is a delayed action, balanced tertiary amine catalyst. It is developed for fast demold high resiliency (HR) molded foam systems. Provides effective balanced reactions with... view more

Dabco® MP602 by Evonik is a delayed non-emissive amine catalyst. It promotes the urethane (polyol-isocyanate) reaction. It was developed for use in cold cure and hot cure flexible molded... view more

Dabco® MP608 by Evonik acts as a delay balance amine catalyst. It works well in TDI, T/M, M/T and MDI systems. It delays cream time with fast post curing and effectively balances reactions with... view more

Dabco® NCM by Evonik is n-cocomorpholine- based catalyst. Used for polyester slabstock foams... view more

Dabco® NE 400 is a novel non-emission (NE) catalyst by Evonik. Used in the production of polyester slabstock foam... view more

Dabco® NE1070 by Evonik is a non-emissive amine catalyst. It reacts into the polyurethane matrix, thereby not contributing to emissions. It is used in flexible foam applications to meet automotive... view more

Dabco® NE1090 by Evonik acts as a novel non-fugitive gelling catalyst. It has the ability to react chemically into the polyurethane foam matrix, thereby it do not contribute to emissions. Exhibits... view more

Dabco® NE210 is a balanced non-emissive amine catalyst by Evonik. Offers no amine catalyst emissions, no VOC emissions, no vinyl staining and no windshield fogging. Possesses master batch stability... view more