ACCUREL® GA303 by Evonik is a cell stabilizer, especially for EVA foams. Provides fast anti-static performance for polyolefin-based films, sheets or injection molded parts. It delays the exchange of... view more

ACCUREL® SF 261 by Evonik acts as a semi-permanent, internal anti-static agent. It is a saturated alkyl(C16-C18) bis(2-hydroxyethyl) amine on LLDPE. Designed for PP and PE films or injection molded... view more

ACCUREL® SF 617 is a high purity slip agent by Evonik. It reduces the coefficient of friction at temperatures below 60°C. Provides smoother surface appearance and better internal melt flow. Suitable... view more

ACCUREL® SF 660 by Evonik functions as a slip agent. Provides good release properties to injection molded PP/PE/EVA-based parts. It reduces the coefficient of friction at temperatures below 60°C... view more

TEGIN® 90 by Evonik is glycerol monostearate. Used as an antistatic agent in LL/LD-PE, HD-PE and PP for film production and injection molded parts. TEGIN® 90 provides resistivity control... view more

TEGIN® 90 Pellets by Evonik is an antistatic agent for polyolefinsis. It is based on glycerol fatty acid ester. It can be applied in combination with ethoxylated fatty amines. TEGIN® 90 Pellets... view more

TEGO® Emulsion DF 19 by Evonik is a silicone-based release agent. Used in UHMW-PE, PP and PVC for injection molding. It contains a non-ionic emulsifier. It offers reduced adhesive forces. TEGO®... view more

TEGO® Emulsion FD 1454 by Evonik is a silicone-based release agent. It contains a non-ionic emulsifier. It is used in UHMW-PE, PP and PVC for injection molding. It is also used for the demolding of... view more

TEGO® Emulsion FD 864 by Evonik is a silicone-based release agent. It is used in UHMW-PE, PP and PVC for injection molding. Also used for demolding of semi-finished products. It offers reduced... view more

TEGO® Release Agent FD 1453 by Evonik is a silicone-based release agent. It is used in UHMW-PE, PP and PVC for injection molding. TEGO® Release Agent FD 1453 is also used for demolding of semi... view more

TEGO® Release Agent FD 1462 by Evonik is silicone-based release agent. It is used in UHMW-PE, PP and PVC for injection molding. It is also used for demolding of semi finished products. It provides... view more

TEGOMER® 994 S by Evonik is a glycerol monostearate-based antistatic agent. It is recommended for use in LL/LD-PE, HD-PE and PP for film production and injection molded parts. It provides... view more

Organo-modified siloxane containing non-reactive aromatic groups. Acts as a rheology modifier. It provides easier processing, higher through-put rates, improved mold release properties, higher... view more