Rhenogran® PCZ-70/IIR by Rhein Chemie Additives (Lanxess Group) is a curing agent for butyl rubber and other rubbers. It is used for cross-linking butyl rubber and other elastomers, e.g. EPDM, SBR... view more

Rhenogran® Pb3O4-80 by Rhein Chemie Additives (Lanxess Group) is a curing activator for chloroprene and butyl rubber as well as chlorosulfonated polyethylene (CSM). It also acts as filler in... view more

Rhenogran® PbO-80 by Rhein Chemie Additives (Lanxess Group) is a curing activator and stabilizer for chlorosulfonated polyethylene and chloroprene rubber. It also suitable as filler in compounds for... view more

Rhenogran® Retarder E-80 by Rhein Chemie Additives (Lanxess Group) is a retarder for natural- and synthetic rubber. It retards the onset of cure without considerably extending the total curing time... view more

Rhenogran® S-80 by Rhein Chemie Additives (Lanxess Group) is a curing agent for all natural- and synthetic rubbers. It improves resistance against aging and dynamic fatigue. In soft compounds, good... view more

RIANOX 1520 (Old name: THANOX 1520) by Rianlon is a multifunctional liquid phenolic antioxidant. Provides both processing and long-term heat aging stability... view more

RIANOX 300 (Old name: THANOX 300) by Rianlon is a hindered thiophenol antioxidant. Used for tubes, water and gas pipes, connectors, high voltage cables and greenhouse films. Possesses high... view more

RIASORB UV-326 (Old name: THASORB UV-326) by Rianlon is a 2-(2'-hydroxy-3'-t-butyl-5'-methylphenyl)-5-chlorobenzotriazole. It is especially suited for polyolefins and cold-cured polyesters. Acts as... view more

RIASORB UV-531 (Old name: THASORB UV-531) by Rianlon is a 2-hydroxy-4-octoxybenzophenone. It can be used as a UV barrier to protect the contents of packages for both industrial and consumer... view more

Long chain dithiocarbamate with powerful antioxidant properties. Has a high solubility in hydrocarbon polymers and protects against heat and UV degradation. Recognised to have low nitrosamine... view more

Long chain dithiocarbamate, readily soluble in hydrocarbon polymers. Recognised to have a low potential for nitrosamine generation. Maintains light colour, particularly in gum stocks and... view more

The most widely used general purpose accelerator for CR. It has a medium speed of vulcanisation. Has a good compression set and general physical prpperties. Can activate thiazoles strongly in... view more

Robac AS100 by Robinson Brothers is a di-isopropyl xanthogen polysulphide. Acts as an accelerator. Its chemical structure is completely free from nitrogen, phosphorous and metallic elements. The... view more

Safe-processing secondary accelerator. Fast at high vulcanisation temperatures. Suited to injection and transfer moulding... view more

Antioxidant 4010NA (IPPD) by Rongcheng Chemical General Factory acts as an antioxidant. It is N-isopropyl-N'-phenyl-P-phenylenediamine. It is highly efficient and can be easily oxidized and... view more

Antioxidant 4020 (6PPD) by Rongcheng Chemical General Factory is a N(1,3-dimethyl-butyl)-N'-phenyl-P-phenylenediamine and acts as an antioxidant. It will become black on exposure to air. It provides... view more

Antioxidant RD (TMQ) by Rongcheng Chemical General Factory is a combustible 2,2,4-trimethyl-1,2-dihydroquinoline polymer and acts as an antioxidant. It offers low toxicity and low pollution... view more

CBS(CZ) (Granular) by Rongcheng Chemical General Factory is a N-cyclohexyl-2-benzothiazole sulfenamide and acts as an accelerator. When vulcanized it shows excellent physical property. It is usually... view more

CBS(CZ) (Oil powder) by Rongcheng Chemical General Factory is a N-Cyclohexyl-2-benzothiazole sulfenamide which acts as an accelerator. It shows excellent physical property after vulcanization... view more

BLR-631 Titanium Dioxide Pigment by Rosin Chemical(Wuping) is titanium dioxide pigment. Possesses good gloss, hiding power, anti-chalking and ease of dispersion. It adopts zinc chemicals to salt treatment. The surface treatment is... view more

BLR-688 Titanium Dioxide Pigment by Rosin Chemical(Wuping) is titanium dioxide pigment. Possesses good gloss, hiding power and high weatherability. It adopts zinc chemicals to salt treatment. The surface treatment is given by... view more

JH- I33 Silane Coupling Agent by Rosin Chemical(Wuping) acts as a silane coupling agent. Can also be used as an intermediate to produce many kinds of coupling agents and silicone fluids. It restrains the penetrating out of PVC... view more

3-(Dimethoxymethylsilyl) propyl methacrylate. It acts as a coupling agent, strengthening agent and cross-linking promoter. Exhibits easy hydrolysis and condensation to form polysiloxane, easy... view more

Terpene Resin T-100 by Rosin Chemical(Wuping) is terpene resin. Acts as a tackifier. It is processed from natural turpentine. It doesn't crystallize. It is transparent, neutral, electrically insulating, hydrophobic and... view more

BARIUM STEARATE (BS) by S V Plastochem is a white fine barium stearate powder. Acts as a water proofing agent, lubricant in metal working and heat- and light stabilizer in PVC. BARIUM STEARATE (BS)... view more

STS - 104 by S V Plastochem is a clear yellow butyl stearate liquid. Exhibits excellent emollient, lubricant and solvent properties. Combines emolliency with an attractive non greasy feel making it... view more

SABIC® CARBON BLACK N220 by SABIC is a hard particle, reinforcing, furnace carbon black grade. It is recommended for rubber industry. It is suitable for truck & passenger car high performance tread... view more

SABIC® CARBON BLACK N326 by SABIC is a reinforcing, furnace carbon black grade. It offers improved performance in rubber compound. It is suitable for tire steel belt skims, motor mounts & OTR... view more

SABIC® CARBON BLACK N330 by SABIC is a hard particle, reinforcing, furnace carbon black grade. It is recommended for rubber industry and footwear & sheeting. It is suitable for tire treads... view more

SABIC® CARBON BLACK N339 by SABIC is a hard particle, reinforcing, furnace carbon black grade. It is recommended for rubber industry. It is suitable for tire treads, sidewall, filler & curing... view more

SABIC® CARBON BLACK N375 by SABIC is a hard particle, reinforcing, furnace carbon black grade. It is recommended for rubber industry. It is suitable for tire treads, sidewall, filler & curing... view more

EXTINITY® 0211-301 by SACO AEI Polymers is a highly loaded antimony oxide concentrate in an EPDM carrier resin. It dispersed easily and provides resultant materials with superior physical properties... view more

AERON® Butan by SCHARR CPC acts as a blowing agent. It fulfils the most important ecological and economic requirements. Suitable for PUR, PE and EPS industry... view more

AERON® Cyclopentan by SCHARR CPC acts as a blowing agent. It fulfils the most important ecological and economic requirements. Suitable for PUR, PE and EPS industry... view more

AERON® D by SCHARR CPC acts as a blowing agent. It fulfils the most important ecological and economic requirements. Suitable for PUR, PE and EPS industry... view more

AERON® Isobutan by SCHARR CPC is a blowing agent for the production of synthetic blowing agents. It is suitable for PE, PUR and EPS industry. AERON® Isobutan fulfils the most important ecological... view more

AERON® Isopentan by SCHARR CPC acts as a blowing agent. It fulfils the most important ecological and economic requirements. Suitable for PUR, PE and EPS industry... view more

WESTON® 705 phosphite supplied by SI Group is a nonylphenol-free, phosphite antioxidant. This versatile stabilizer is compatible with SBR, NBR, HDPE, LLDPE, elastomers, ABS and PVC. WESTON® 705... view more

LOWINOX® TBM-6 stabilizer by SI Group is a non-coloring, non-staining, thiophenol antioxidant. It is used in HDPE and LDPE for tubes, water & gas pipes, connectors, high voltage cables and... view more

LOWINOX® AH 25 stabilizer by SI Group is phenolic antioxidant. It displays excellent protection against oxygen and sun crack. LOWINOX® AH 25 stabilizer provides good scorch resistance in wire and... view more

ANOX® 1315 by SI Group is 3,5-Bis(1,1-dimethylethyl)-4-hydroxy-benzenepropanoic acid. Acts as an antioxidant. It contains alkyl chain that adds great compatibility and solubility to various... view more

ANOX® 1315/SE stabilizer by SI Group is a self-emulsifying liquid phenolic antioxidant. It is compatible with PVC, ABS, SBR, BR and NBR. ANOX® 1315/SE stabilizer is a highly effective... view more

LOTADER® 3200 by SK Functional Polymer is terpolymer of ethylene, acrylic ester and maleic anhydride. Acts as an adhesion promoter and as a coupling agent. Possesses very good mechanical properties and is very... view more

Terpolymer of ethylene (E), ethyl acrylate (EA) and maleic anhydride (MAH). Used as a coupling agent in mineral filled compounds. Shows compatibility with LDPE in all proportions, and with almost... view more

Terpolymer of ethylene (E), ethyl acrylate (EA) and maleic anhydride (MAH). Acts as a coupling agent. Shows compatibility with LDPE in all proportions, and with almost all other ethylene copolymers... view more

Terpolymer of ethylene (E), ethyl acrylate (EA) and maleic anhydride (MAH). Used as processing aids (modifier) for rubbers of high hardness. Also used as a coupling agent for mineral fillers. Shows... view more

LOTADER® P3 3200 by SK Functional Polymer is random terpolymer of ethylene, acrylic ester and maleic anhydride in powder. Acts as an adhesion promoter and a coupling agent. Exhibits very good adhesion on epoxy resin... view more

CALCIUM STEARATE POS is octadecanoic acid (calcium soap). It acts as a mould release-, antistatic- and antifogging agent. Used in thermosetting resins, rubbers, polyolefin, PVC and plastics... view more

Mixture of tallow, hydrogenated, mono-, di- and tri-glycerides. It acts as a mould release-, antistatic- and antifogging agent. Applications include thermosetting resins, polyolefin and PVC... view more

GMS 40 V is octadecanoic acid, monoester with 1, 2, 3 propanetriol. It acts as a mold release-, antistatic- and antifogging agent. Used in PVC and polyolefins... view more

STEARINE N is hydrogenated tallow acid. It acts as a mold release-, antistatic- and antifogging agent. Used in rubbers... view more

Zinc salt (octadecanoic acid). It is a zinc salt of fatty acid. Acts as a releasing agent and lubricant. Exhibits ease in incorporation. Used in thermosetting resins... view more

SUNOVIN® 201 by SUNSHOW is a liquid ester UV light absorber. It exhibits extraordinary UV stabilization efficiency and low color & volatility. It is recommended for use in PU. SUNOVIN® 201 shows... view more

SUNOVIN® 202 by SUNSHOW is a mixed light stabilizer. It is designed for use in HMDA and alkaline cured epoxy. It offers improved heat stability of products during the storage, transportation and... view more

SUNOVIN® 209 by SUNSHOW is a highly efficient, UV light absorber. It can absorb UV radiation of 270-340 nm wavelength. It is designed for use in light-colored transparent products. It exhibits... view more

SUNOVIN® 622 by SUNSHOW is a light stabilizer. It offers low volatility and minimal migration due to its high molecular weight and oligomeric structure. SUNOVIN® 622 is designed for use in TPE, TPV... view more

SUNOVIN® 906 by SUNSHOW is a compounded light stabilizer of HALS and UVA. It is odorless, highly efficient, non toxic grade. It is recommended for polyolefin plastics, polyurethane, ABS resin and... view more

SABOSTAB® AO 1010 by Sabo is a pentaerythritol Tetracids (3-(3,5-di-tert. butyl-4-hydroxyphenyl) propionate). Used as an antioxidant. Offers improved stability regarding retained color and... view more

SABOSTAB® AO 1076 by Sabo is an octadecyl-3-(3,5-di-tert. butyl-4-hydroxyphenyl) propionate. Used as an antioxidant. Offers improved stability of these substrates regarding retained color and... view more

SABOSTAB® AO 1076P by Sabo is an octadecyl-3-(3,5-di-tert. butyl-4-hydroxyphenyl) propionate. Used as an antioxidant. Offers improved stability of these substrates regarding retained color and... view more

Tris(2,4-ditert.butylphenyl)phosphite. Used as processing stabilizer. Possesses low volatility and particularly resistant to hydrolysis... view more

Aluminium(III)-acetylacetonate. Acts as a versatile catalyst, curing agent or crosslinker for many polymerizations. It provides good solubility in organic solvents and easy handling as a free... view more

Tetrabutylammonium acetate complex. Acts as a catalyst, curing agent and initiator. It is a neutral quaternary ammonium salt. Exhibits strong phase transfer catalysis activity. Compatible with... view more

Safcar 65 by Safic-Alcan is a blend of isopropylated phenol & phosphate (3:1). It acts as a flame retardant for PVC, flexible polyurethanes, cellulosic resins and synthetic rubber. Safcar 65 can be... view more

Safic-Chem 6PPD by Safic-Alcan is a N-(1,3-dimethylbutyl)-N’-phenyl-p-phenylenediamine. It acts as an antioxidant for rubber. It exhibits outstanding dynamic flex protection. Safic-Chem 6PPD shows... view more

Safic-Chem IPPD by Safic-Alcan is a N-isopropyl-N’-phenyl-p-phenylene-diamine. It is a highly efficient antioxidant. It is recommended for natural rubber and many kinds of synthetic rubber & their... view more

Safic-Chem TMQ GR by Safic-Alcan is a low molecular weight, polymerized (2, 2, 4–trimethyl-1, 2-dihydroquinoline). It is recommended for natural rubber, SBR and NBR. It can effectively prevent... view more

VULCOFAC® 4100 by Safic-Alcan is a special blend of a blocked diamine and an accelerator. It offers vulcanization of elastomers reacting with amines such as fluorinated rubbers, ethylene acrylate... view more

COPPER PHTHALOCYANINE BLUE ALPHA by Sai Group India is a copper phthalocyanine pigment. It exhibits good reagent resistance, solvent fastness and oil fastness. COPPER PHTHALOCYANINE BLUE ALPHA is... view more

COPPER PHTHALOCYANINE BLUE BETA by Sai Group India is a copper phthalocyanine pigment. It exhibits good reagent resistance and excellent light fastness. COPPER PHTHALOCYANINE BLUE BETA is... view more

COPPER PHTHALOCYANINE GREEN 7 by Sai Group India is a polychlorinated copper phthalocyanine pigment. It exhibits high tint strength, very soft texture, excellent light fastness. It shows good heat... view more

Sanitized® BC 98-56 by Sanitized is an antimicrobial agent with bacteriostatic effect against a large number of gram-positive and gram-negative bacteria, yeasts, fungi, and algae. The additive is... view more

Sanitized® BC A 21-61 by Sanitized is an antimicrobial additive. It is compatible with numerous thermoplastic polymers typically used for sheets and extruded or molded parts such as PP, PE, PC, EVA... view more

Sanitized® PL 11-32 by Sanitized is an antimicrobial agent with a reliable effect on a large number of molds, mildew, fungi, yeasts, and bacteria. It is suitable for PVC plastisol. It inhibits germ... view more

Sanitized® PL 19-30 by Sanitized is an antimicrobial agent. Suitable for natural and nitrile rubber, latex, gloves, and various PU applications. It is water-based and offers comprehensive... view more

NEWPOL 50HB-2000 by Sanyo Chemical Industries is poly (oxyethylene, oxypropylene) glycol monoalkyl ether. Acts as a release agent. NEWPOL 50HB-2000 is suitable for high speed tire molding and foam rubber... view more

NEWPOL 50HB-5100 by Sanyo Chemical Industries is poly (oxyethylene, oxypropylene) glycol monoalkyl ether which acts as a release agent. NEWPOL 50HB-5100 is suitable for automotive radiator hose, household rubber hose etc... view more

NEWPOL LB-1715 by Sanyo Chemical Industries is polyoxypropylene glycol monoalkyl ether. It also acts as a release agent and causes no- swelling & shrinkage of natural or synthetic rubbers. NEWPOL LB-1715 is suitable for... view more

NEWPOL LB-625 by Sanyo Chemical Industries is polyoxypropylene glycol monoalkyl ether. It acts as a release agent. NEWPOL LB-625 is suitable for high-speed tire molding and foam rubber... view more

PEG 4000S by Sanyo Chemical Industries is polyethylene glycol which acts as a release agent. Suitable for foam rubber and latex foam... view more

Saret® 1110 Dry liquid by Sartomer (Arkema) is a methacrylate. Acts as a crosslinking co-agent/curing agent. Offers scorch protection, low compression set, temperature stability, high elongation... view more

ALCHEM 11 Alcohol by Sasol is primary alcohols with alkyl chain length of 11 carbon atoms. It is obtained by fractionation of LIAL alcohols. It finds application in rubber-, plastic additives and... view more

ALCHEM 123 Alcohol by Sasol is a primary linear alcohol mixture with alkyl chain length of 12 to 13 carbon atoms. It is obtained by fractionation of LIAL alcohols. It is used in rubber-, plastic... view more

ANIODAC 13-P20-27 by Sasol is an anionic surfactant. It is the sodium salt of MARLIPAL 13 alcohol poly-ethoxy sulfate. ANIODAC 13-P20-27 is recommended for textile, plastic and rubber additives... view more

ANIODAC DSN-25 by Sasol is an anionic surfactant. It is the sodium salt of linear alkyl-aryl sulphonate. ANIODAC DSN-25 is suitable for textile, plastic- and rubber additives... view more

BIODAC 2-32 by Sasol is a fatty alcohol poly-glycol ether based non-ionic surfactant. It is based on LIAL 111, ethylene oxide and propylene oxide. BIODAC 2-32 is used in rubber-, plastic additives... view more