CASABOND™ 1201 by Thomas Swan acts as an adhesion promoter. It can be formulated into systems based on natural rubber, SBR, BR, NBR, EPDM, CR and blends of NR/SBR, NR/BR and BR/SBR. It enhances adhesion... view more

CASABOND™ 1202 by Thomas Swan acts as an adhesion promoter and can be formulated into systems based on natural rubber, SBR, BR, NBR, EPDM, CR and blends of NR/SBR, NR/BR and BR/SBR. It improves handling... view more

CASABOND™ 1203 by Thomas Swan acts as an adhesion promoter and can be formulated into systems based on natural rubber, SBR, BR, NBR, EPDM, CR and blends of NR/SBR, NR/BR and BR/SBR. It requires the... view more

CASABOND™ TX by Thomas Swan is a solution of polymeric isocyanate with low viscosity. It is added to the rubber dough prior to use (up to 8 hours maximum) and the bond is formed during normal... view more

CASABOND™ TXE by Thomas Swan is a solution of polymeric isocyanate with low viscosity. It has a limited pot life. It is added to the rubber dough prior to use (up to 8 hours maximum), and the bond is... view more

Actmix® CBS-80GE F140 by Ningbo Actmix Rubber Chemicals is a N-cyclohexyl-2-benzothiazolesulphenamide. Acts as a vulcanization accelerator. It can lead to long scorching time of rubber compounds, high processing safety and fast... view more

Actmix® CTP-80GE F500 by Ningbo Actmix Rubber Chemicals is a cyclohexylthiophthalimide. Acts as a vulcanization retarder. It can prolong total vulcanizing time. It can improve processing safety and not affect properties of... view more

Actmix® CaO-80GE F200 by Ningbo Actmix Rubber Chemicals is a calcium oxide. Acts as a defoaming agent. It contains 20 wt% polymer binder and dispersing agent. It avoids spongy defect in the presence of vapor when rubber products... view more

Actmix® DCBS-80GE F140 is a N,N-dicyclohexyl-2-benzothiazolsulfene amide (DCBS, DZ) 80 wt%. Acts as a rubber accelerator. It contains 20wt% polymer binder and dispersing agent. It delays scorching... view more

Actmix® DOTG-75GA F140 by Ningbo Actmix Rubber Chemicals is a di-o-tolylguanidine (75%). Acts as a vulcanization accelerator. It can lead to a very slow start of vulcanization and relatively slow vulcanization rate. Improves... view more

Andisil® MOH 1,000 by AB Specialty Silicones is useful in the treatment of fillers and as an anti-structuring additive in high consistency silicone rubber and silicone room temperature vulcanizing... view more

Andisil® MOH 10,000 by AB Specialty Silicones is useful in the treatment of fillers and as an anti-structuring additive in high consistency silicone rubber and silicone room temperature vulcanizing... view more

Andisil® MOH 100 by AB Specialty Silicones is useful in the treatment of fillers and as an anti-structuring additive in high consistency silicone rubber and silicone room temperature vulcanizing... view more

Andisil® MOH 50,000 by AB Specialty Silicones is useful in the treatment of fillers and as an anti-structuring additive in high consistency silicone rubber and silicone room temperature vulcanizing... view more

Andisil® OH 1,000 by AB Specialty Silicones is useful in the treatment of fillers and as an anti-structuring additive in high consistency silicone rubber and silicone room temperature vulcanizing... view more

Acmesil 69 C by Acmechem is a silane coupling agent. It improves reinforcing properties of fillers with silanal groups. Offers greater tensile strength, higher moduli, reduced compression set... view more

Acmetol 212 by Acmechem is a processing additive for rubber polymers. It is used to improve the general compound processing without significant influence on the physical properties. It acts as a... view more

Accelerator CBTS by Akrochem is a delayed action sulfenamide accelerator for natural- and synthetic rubbers. It offers better scorch resistance than thiazoles and more scorch safety than BBTS. It is... view more

Accelerator ZBED by Akrochem is a very active form of zinc di-thiocarbamate-based accelerator, which can be modified by MBT or MBTS. It is non-staining, non-discoloring and is safer processing than... view more

Akrochem® DMB-50 by Akrochem is a mono-functional peroxide in paste form used for the cross-linking of silicone rubbers. It can easily be incorporated into a silicone rubber compound on a 2-roll... view more

Akrofax™ 11 LG Brown by Akrochem is vulcanized vegetable oil. It improves ozone resistance of the rubber compounds. It reduces the migration of oils and plasticizers to the surface in low durometer... view more

Akrofax™ 57 White by Akrochem is a white, medium-hard, vulcanized vegetable oil, made from pure rapeseed oil and mineral stabilize. It used sulfur monochloride to cure the vegetable oil, that acidifies... view more

Sabalith® by Albemarle acts as a curing agent. Sabalith® is a blend of potassium nitrate and lithium nitrate with foaming agent. The nitrite-free heat transfer salt for salt bath curing in open or... view more

Zinc Oxide (Alfa Chemistry) by Alfa Chemistry acts as a dispersing-, cross-linking and curing agent. It can improve the viscidity of rubber compounds, and the adhesive force of materials such as rubber and code fabric... view more

Good thermal stability. Stable in air and oil at room temperature... view more

DPTU(CA) by Anyang General Chemical is a medium-speed vulcanization accelerator. It synergises with sulfur donor to boost vulcanization when used in NR and SBR. It acts as secondary accelerator in... view more

DPTU(CA) Oiled Powder by Anyang General Chemical is a medium-speed vulcanization accelerator. It synergises with sulfur donor to boost vulcanization when used in NR and SBR. It acts as secondary... view more

33% DPTU DISPERSION by Aquaspersions is a dispersion of diphenylthiourea. Acts as an accelerator. It exhibits characteristic odor and negligible evaporation rate. It should not be used with oxidizing agents... view more

35% AQUACCEL Z DISPERSION by Aquaspersions is a dispersion of zinc diisononyl dithiocarbamate. It is fast-curing, low-nitrosamine producing accelerator. It is non-viscous and exhibits negligible evaporation rate... view more

40% DPG DISPERSION by Aquaspersions is a dispersion of diphenylguanidine. Acts as an accelerator. It is an activator for DPTU. It is miscible in water and exhibits barely perceptible odor. Used in the... view more

40% ZBED DISPERSION by Aquaspersions is a dispersion of zinc diethyl dithiocarbamate. It is a high purity, low nitrosamine producing accelerator. It is miscible in water and exhibits negligible evaporation rate... view more

50% TMTD DISPERSION by Aquaspersions is a dispersion of tetramethyl thiuram disulfide. Acts as an accelerator. It is miscible in water and exhibits barely perceptible odor. It should not be used with strong... view more

Echo A by Ashland is a vulcanizing agent. It is suitable for rubber compounds... view more

Echo MPS by Ashland is a vulcanizing agent. Echo MPS is suitable for rubber compounds... view more

Peroxide D-16 by Ashland is a vulcanizing agent. It is suitable for thermoplastic and rubber... view more

Peroxide D-68 by Ashland Specialty Chemical is a vulcanizing agent. Peroxide D-68 is suitable for rubber and thermoplastics... view more

Ca-Zn and organic chemical compound. Acts as heat stabilizer. Improves the impact resistance of profiles, welding strength of the door and window, improving the outdoor aging property of door as... view more

Ca-Zn and organic chemical compound. Acts as a heat stabilizer. Offers good color staining, good heat stability at later period, good plasticization fluidity, low production electricity, saving... view more

Zinc oxide. It acts as a dispersing agent, cross linking agent and a curing agent. It appears as a white or a little yellow powder as it is yellow at the high temperature and resume being white... view more

Zinc Oxide AC by Brüggemann is an active zinc oxide. It is produced by a special wet chemical process. Acts as an activator for sulfur and thiuram vulcanization. The raw material used is a... view more

Zinc Oxide RAC by Brüggemann is an active zinc oxide, which is produced by a special precipitation process. Due to gentle thermal treatment and its chemical origin, it provides excellent... view more

CAB-O-SIL® DURAMOLD™ 2150 by Cabot is a medium-high surface area fumed silica. Acts as a filler. It has a highly aggregated structure with minimal impurities. Exhibits upto 30% less grit that... view more

Chartwell B-505.1 by Chartwell International is a vulcanizing agent and adhesion promoter. Imparts mercapto organofunctionality. Used for mineral-filled (silica, etc.) or carbon black pigmented sulfur cured elastomers... view more

Deoflow A by DOG Chemie acts as a dispersing agent. It is a blend of fatty alcohols and fatty acid esters combined with lubricant. It improves the flow and extrusion properties. It is free from... view more

Blend of fatty alcohols and fatty acid esters. Used as a disperging agent. Improves the flow and extrusion properties... view more

Calcium salt of saturated fatty acids and amide-esters. Acts as a zinc-free and water-free lubricant and dispersing agent. It provides improved filler dispersion, reduced compound viscosity and... view more

bis(3-triethoxysilylpropyl)tetrasulfane. Used as coupling agent. Improves tensile strength, modulus and abrasion of the vulcanizates in all commonly used elastomers... view more

Bis(3-triethoxysilylpropyl)tetrasulfane. Used as vulcanizing agent. Improves tensile strength, modulus and abrasion... view more

Blend of magnesium and aluminum. Acts as a flame retardant and heat stabilizer. Suitable for hard PVC and acid absorption of PE & PP... view more

Blend of magnesium and aluminum. Acts as a flame retardant and heat stabilizer. Suitable for soft PVC and acid absorption of PE & PP... view more

XIAMETER™ RBM-9002 Rubber Additive is a silicone compound by Dow Chemical. Acts as a heat stabilizer. Improves the heat stability of vulcanized silicone rubber. It is easily added on a two-roll mill... view more

XIAMETER™ RBM-9003 Modifier by Dow Chemical is a silicone compound. Acts as a heat stabilizer. Improves the heat stability of vulcanized silicone rubber. It is easily added on a two-roll mill prior... view more

XIAMETER™ RBM-9004 Modifier by Dow Chemical is a heat stabilizer. Improves the heat stability of vulcanized silicone rubber. It is easily added on a two-roll mill prior to vulcanization. XIAMETER™... view more

XIAMETER™ RBM-9010 Rubber Additive & Modifier by Dow Chemical improves the mold release of vulcanized silicone rubber. It may not eliminate the need for mold release agents but it will greatly... view more

Dusantox® 86 by Duslo is unrefined dicumyldiphenylamine. Used as antidegradant for universal application especially for rubber goods based on CR as well as on NR, IR, BR, SBR, NBR, EPDM and their... view more

Dusantox® ODPA by Duslo is octylated diphenylamine. It is used as antioxidant. It provides very good dispersibility. It offers good efficiency against dynamic fatigue. Dusantox® ODPA shows good... view more

N-1,3 dimethylbutyl-N'-phenyl-p-phenylenediamine. Used as antiozonant and antioxidant for rubber and other elastomers. Provides very good protection against ozone in static as well as in dynamic... view more

N-isopropyl-N’-phenyl-p-phenylenediamine. Used as antiozonant and antioxidant. Provides very good protection against ozone in static as well as in dynamic conditions... view more

Blend of reaction products of Dusantox® 6PPD with α-methylstyrene. Effective stabilizer of synthetic styrene-butadiene and polyisoprene rubbers. Offers low volatility and very good washout... view more

High molecular weight linear random -block 1,3 styrene-butadiene copolymer having 40% of styrene content, 30% present as a polystyrene block. It has BHT-free or phosphite-free non-staining... view more

Solprene® 416 by Dynasol is BHT/TNPP-free, linear high molecular weight random-block 1,3 styrene-butadiene copolymer. Acts as an impact modifier. It is non-staining antioxidant system and is gel-free... view more

Duralink™ HTS by Eastman is an adhesion promoter. It is used in sulfur-based vulcanization systems to generate hybrid cross-links. It further provides increased retention of physical and dynamic... view more

Tolyltriazole by Eutec Chemical acts as a pre-vulcanization retarder. These white to off-white granules are used for chlorinated rubber and halobutyl rubbers... view more

Coupsil® 6109 by Evonik acts as a reinforcer/ filler in rubber compounds. It is precipitated silica surface-modified with organosilane. It imparts greater tensile strength, higher moduli and reduced... view more

Coupsil® 8113 by Evonik is a reinforcing filler based on precipitated silica, surface modified with organosilane Si 69®. It reacts with unsaturated polymer during vulcanization under formation of... view more

Coupsil® 8113 GR by Evonik acts as a reinforcing filler in rubber compounds. Offers the advantage of a homogeneous modification with low moisture adsorption during storage and significantly lower... view more

Coupsil® VP 6411 by Evonik acts as a reinforcing filler in rubber compounds. It imparts greater tensile strength, higher moduli, optimized dynamic properties, lower compression set values and better... view more

Coupsil® VP 6508 by Evonik acts as a reinforcing filler. Designed for peroxide-cured rubber compounds where optimum technical properties are required. Imparts greater tensile strength, higher modulus... view more

BactiBlock® 920 B0 supplied by FARRL is an antimicrobial additive suitable to be used in compounding of a broad variety of polymeric products like polyolefins or others to be used in food contact... view more

BactiBlock® 920 B4 supplied by FARRL is an antimicrobial additive suitable to be used in a broad variety of polymeric products like thermosets, thermoplastics, elastomers and rubber. The product is... view more

KESAOIL D70 supplied by FARRL is a deodorized (clear) epoxidized soybean oil (ESBO). It is used as a plasticizer with stabilizing properties. It offers a low migration (often comparable to polymeric... view more

KESAPLAST 8100 supplied by FARRL is an adipate (DEHA/DOA) used as plasticizer in PVC, plastisols, ethyl cellulose, polystyrene and rubber. It offers excellent cold elasticity, good electrical... view more

KESAPLAST 8400 supplied by FARRL is an epoxidized soya fatty acid ester which is a green alternative to DINP, DOTP and polymeric plasticizers. Offers good low temperature resistance from above 5°C... view more

Acts as a processing aid. Offers better thermal stability for rubbers processed at higher temperatures. Reduces the mill-sticking of neoprene. Promotes de-molding of press-cured articles. Improves... view more

3- Mercaptopropyltriethoxysilane LT-580 by HUBEI BLUESKY NEW MATERIALS is a silane coupling agent having sulfhydryl group with effects like surface rust proofing agent, that improves surface protection against corrosion and oxidation resistance... view more

Dibutyltin diacetate. It functions as a solidifying catalyst. It appears as a light yellow or colorless transparent liquid with acetic acid smell. Mainly used in RTV (room temperature vulcanizing)... view more

Methyl tri acetoxy silane D-14 by HUBEI BLUESKY NEW MATERIALS is non-crystallized of methyl tri acetoxy silane. It acts as a cross linking agent for vulcanizing silicone rubber and acetoxy sealant. It appears like colorless to light... view more

Methyl tri acetoxy silane D-17 by HUBEI BLUESKY NEW MATERIALS acts as a crosslinking agent for vulcanizing silicone rubber and acetoxy sealant. It appears like colorless to light yellow transparent liquid and has strong acetic acid... view more

Mixture of MTAS (methyl tri acetoxy silane) and ETAS (ethyl tri acetoxy silane). It acts as a cross linking agent for vulcanizing silicone rubber and acetoxy sealant. It appears like colorless to... view more

Dicumyl peroxide. Acts as a polyolefin and rubber vulcanization crosslinker. Offers increased thermo resistance, chemical resistance, pressure durability, crack resistance and mechanical strength... view more

2,2-Dibenzothiazole disulfide. Acts as a medium and over speed vulcanization accelerator for variety of rubber, natural rubber and the general synthetic rubber. Has good smoothness of vulcanization... view more

DPTT (TRA) by Hangzhou Hi-Tech Fine Chemical is dipentamethylene thiuram hexasulfide (Tetrasulfide). Acts as the rubber accelerator of natural rubber, styrene-butadiene rubber, acryloxitrile -butadiene rubber, etc... view more

2-Mercaptobenzothiazole. Acts as a medium and over speed vulcanization accelerator. The higher sulfation, giving the vulcanizate good aging properties and resistance to fatigue performance. When... view more

Polycizer® DBP by Harwick Standard is a dibutyl phthalate-based plasticizer. It decreases milling time, increases plasticity and aids processing. It exhibits high-solvation and gives soft, flexible... view more

Polycizer® DOP by Harwick Standard is a di-2 ethylhexyl phthalate-based general-purpose plasticizer. It readily incorporates and gives vulcanization with extremely good aging and electrical... view more

Stangard® CTP-PWD-D by Harwick Standard is a N-(cyclohexylthio)phthalimide. It is a vulcanization inhibitor available in white crystal or oil treated powder form. It is a true retarder, as it only... view more

Stearic Acid F-1000 acts as a rubber activator and dispersing agent by Harwick Standard. It also acts as a processing aid. It is a hydrogenated stearic acid designed for application requiring lower... view more

Stearic Acid F-1500 by Harwick Standard acts as a rubber activator, stabilizer, dispersing agent and processing aid. It provides lower iodine number and can be used in vulcanization reaction... view more

ACCELERATOR CBS (CZ) (Granule) by Henan Connect Rubber Chemical is a delayed action type accelerator. It is N-cyclohexyl-2-benzothiazole sulfenamide. It offers good scorch safety and fast cure rate... view more

ACCELERATOR CBS (CZ) (Oil powder) by Henan Connect Rubber Chemical is a delayed action type accelerator. It is N-cyclohexyl-2-benzothiazole sulfenamide. It offers good scorch safety and fast cure... view more

ACCELERATOR CBS (CZ) (Powder) by Henan Connect Rubber Chemical is a delayed action type accelerator. It is N-cyclohexyl-2-benzothiazole sulfenamide. It offers good scorch safety and fast cure rate... view more

Rubber Accelerator TMTD (Acceptable) by Henan Rtenza is tetramethyl thiuram disulphide grade. It provides good aging and heat resistance. It can be used as vulcanization accelerator. It is used in... view more

Rubber Accelerator TMTD (First-class) by Henan Rtenza is tetramethyl thiuram disulphide grade. It can be used as vulcanization accelerator. It offers good aging and heat resistance. It is used in... view more

Rubber Vulcanizing Accelerator MBTS(DM) by Henan Rtenza is dibenzothiazole disulphide grade. It acts as a rubber vulcanizing accelerator. It is used in natural rubber and synthetic rubber. It... view more

Rubber Accelerator BZ by Jing Xian Yuelong Metal Rubber Products is a non-discoloring and non-staining zinc dibutyl dithiocarbamate grade. It exhibits excellent storage stability. It is a very... view more

Rubber accelerator DM by Jing Xian Yuelong Metal Rubber Products is a non-toxic dibenzothiazole disulfide grade with slight bitter taste. It provides high vulcanization temperature, excellent... view more

JingJiang Concord-ZINC STEARATE 10.0 % Zn by Jingjiang Concord Plastics Technology is stearic acid of zinc. It acts as a heat stabilizer, and lubricant in the rubber industry and as an activator of media for vulcanization push. It is non-toxic with no... view more

Stearic acid of zinc. It acts as a heat stabilizer, lubricant in rubber industry and as an activator of media for vulcanization push. It is non-toxic with no sulfide pollution. It appears as a white... view more

Stearic acid of zinc. It acts as a heat stabilizer, lubricant in rubber industry and as an activator of media for vulcanization push. It is non-toxic with no sulfide pollution. It appears as a white... view more

An internal antistatic agent. Jistat 500S is a fluid, easy to handle and possesses good heat resistance. It provides good surface after vulcanization but does not support neither yellowishing nor... view more

Transparent and water-soluble product, especially used as mandrel release agent to treat mandrel for the vulcanization of tubes in autoclaves. Due to its incompatibility with rubbers, minimized... view more

Antitack BTO-31 LF by Kettlitz Chemie is an antitack agent. Due to its additives (detergents, anti rust and anti foam agents) can be used in batch-off-systems. It does not contain any heavy metal... view more

Magnesium stearate dispersion. Used in batch-off dip tanks or "simple" dip tanks. Offers better wetting properties... view more

Combination of minerals, detergents and antifoam agents. Used for the treatment of unvulcanized rubber compounds. Offers superior efficiency... view more

Combination of minerals, detergents and antifoam agents. Used for the treatment of unvulcanized rubber compounds. Offers superior efficiency... view more

Deolink TESPT by King Industries is bis(3-triethoxysilylpropyl) tetrasulfane, 50% active on an EVA wax polymer carrier. Acts as an activator for fillers and is based on sulfur-silane chemistry. It links to... view more

Deolink VH by King Industries is alkoxysilane, 50% active on a PE wax carrier. Acts as an activator for fillers and is based on alkoxysilane. It links chemically to the rubber, silica as well as other... view more

Tris(2-methoxyethoxy) vinylsilane, 50% active on an EVA wax polymer carrier. Acts as an activator for fillers and is based on Tris(2 methoxyethoxy) vinylsilane. It links chemically to the rubber... view more

Aqueous emulsion of selected fatty acid esters and high molecular weight waxes combined with inert fillers. Acts as a plasticizer for the dispersion of carbon black and light color filler. Also... view more

Deostab by King Industries is a proprietary stabilizer in crosslinked fatty oils. Acts as a vulcanization stabilizer for CaO containing rubber compounds. Is a cure stabilizer for EPDM and other... view more

Adiprene® BL-16 by Lanxess acts as a vulcanization agent. It is urethane elastomer with blocked isocyanate curing sites. It exhibits high tensile strength and excellent oil- & abrasion- resistance... view more

Levaform® SI-V by LANXESS is a mold release agent. It is an aqueous emulsion of a medium viscosity silicone oil. It exhibits a high gloss and pleasant feel and can be processed by vulcanization... view more

Rhenodiv® BP-166 by Lanxess is a release agent designed for tire tube. It is an aqueous dispersion of mineral fillers. It is 100% silicone-free single-release insides tire tubes. It is water-based... view more

Rhenodiv® BP-9500 by Lanxess is a release agent. It is an unfilled, silicone-free product based on glycol and vegetable oils. It is water-based, solvent-free and environmentally friendly. It allows... view more

Scorchguard® O by Lanxess is a vulcanization activator and acid acceptor. It is a blend of 74% activated magnesium oxide and 26% organic binders. It reduces mixing times in CR and other... view more

HiDispersion® CBS-80 by LIONS INDUSTRIES is a curing accelerator for rubbers. It is used as a sole accelerator for the low sulfur vulcanization or in combination with dithiocarbamate or thiuram... view more

HiDispersion® DTDM-80 by LIONS INDUSTRIES is a rubber curing accelerator. It liberates free sulfur which, in contrast to normal sulfur, mainly forms mono and diether bridges under normal curing... view more

HiDispersion® MBT-80 by LIONS INDUSTRIES is a semi-ultra, multi-purpose accelerator with a long plateau effect. It imparts good physical properties to vulcanizates. It acts as an anti-scorch agent... view more

HiDispersion® MBTS-80 by LIONS INDUSTRIES is a versatile semi-super accelerator with good processing safety. It is activated by thiurams, dithiocarbamates and aldehyde-amines. It shows good aging... view more

HiDispersion® TMTD-80 by LIONS INDUSTRIES acts as a secondary accelerator for NR, SBR, NBR, IIR, BR, and CR. It provides good heat resistance and aging resistance, as a sulfur-less curing agent. It... view more