ALKAMIX™

ALKAMIX™ MB-6002 by Marplex is an antiblock masterbatch formulated with an antiblock additive concentration of 25%. It can be added to polyethylene during extrusion to reduce the blocking tendency of... view more

Hindered amine light stabilizer (HALS). It is a 20% concentrate of an effective ultra-violet (UV) light stabilizer in polyethylene carrier. It has low volatility and high resistance to extraction... view more

Hindered amine light stabilizer (HALS). It is a 10% concentrate of an effective ultra-violet (UV) light stabilizer in polyethylene carrier. It has low volatility and high resistance to extraction... view more

Antistatic masterbatch based on an ethoxylated alkyl amine compound at a concentration of 2%. It can be added to polyethylene during extrusion to assist in dissipation of static charge build-up... view more

Combination of slip and antiblock masterbatch based on a low density polyethylene carrier. It is formulated with slip additive (Erucamide) at a concentration of 8 % and antiblock additive at a... view more

Processing aid masterbatch based on a fluoropolymer compound at a concentration of 5%. It is compatible with the process aid used in "Alkatuff" film polymers. It can be added to linear low density... view more

Slip masterbatch formulated with slip additive (Oleamide) at a concentration of 1.1%. It can be added to polyethylene during extrusion to reduce the coefficient of friction. Its recommended addition... view more

Antiblock masterbatch formulated with an antiblock additive concentration of 15%. It can be added to polyethylene during extrusion to reduce the blocking tendency of film, particularly where minimum... view more

Antifogging masterbatch based on a glycerol ester compound. It can be added to polyethylene during extrusion to reduce the incidence of apparent condensation or fogging during subsequent use of the... view more

BHT (Butylated Hydroxy Toluene) free antioxidant masterbatch. It is designed to impart thermal processing stability to base grade low density polyethylene during extrusion. It can be added to low... view more

Antioxidant masterbatch. It is non-abrasive and low melt fraction MDPE compound designed to minimize polymer degradation during extruder start-up and shut down. It is designed to impart short term... view more

Processing aid masterbatch based on a fluoropolymer compound at a concentration of 2%. It can be added to linear low density polyethylene (LLDPE) during extrusion to eliminate melt fracture type... view more

Slip masterbatch formulated with erucamide at a concentration of 2%. It can be added to polyethylene during extrusion to reduce the coefficient of friction of films. Its recommended addition level... view more

Combination of slip and antiblock masterbatch based on a low density polyethylene carrier. It is formulated with slip additive (Erucamide) at a concentration of 1.6% and antiblock additive at a... view more