SILIKE® NM-3 by Chengdu Silike Technology is a silicone grade with styrene butadiene styrene (SBS) as a base resin. Acts as a glossing agent, anti-wear agent and processing aid. Possesses... view more

Deoflow 821 by DOG Chemie acts as a lubricant, dispersing and mold release agent. It is zinc-free and effective against mill sticking. It imparts positive influence on flow and release in the... view more

Calcium salt of saturated fatty acids and amide-esters. Acts as a zinc-free and water-free lubricant and dispersing agent. It provides improved filler dispersion, reduced compound viscosity and... view more

Blend of fatty alcohols and salts of fatty acids combined with lubricants. Used as an internal lubricant... view more

Preparation of zincdialkyldithiophosphate and amine,70 % adsorbed on silica. Used as vulcanization accelerator for rapid cure of EPDM and diene rubber. Provides low compression set as well as very... view more

Deovulc® BG 287 by DOG Chemie is a synergistic combination of different accelerators which cannot form dangerous nitrosamines. Acts as a vulcanizing accelerator. Offers rapid vulcanization, good heat... view more

2-hydroxy-4-n-octoxybenzophenone. Acts as a UV absorber. It protects polymers from UV radiation and helps to preserve the original appearance and physical integrity of molded articles, films... view more

White suspension. Exhibits excellent antistick and release characteristics. Provides a release coating effective with all types of rubber compounds epoxies and polyurethanes. Can also be used as an... view more

Water-based, semi-permanent release agent for rubber molding. Fast curing .                                 No contaminating transfer . Non flammable ... view more

Excellent release and slip properties and is recommended for the most demanding molding applications, especially for highly abrasive compounds.   Fast curing... view more

Offers unparalleled release and slip properties and is recommended for the most difficult rubber molding applications.   Fat curing.   Excellent slip... view more

Water dilutable concentrate that provides a durable release film for most rubber molding applications. Fast curing.                                                 No chlorinated or aromatic... view more

ENSO RESTORE™ RL by ENSO Plastics is bio degradant additive. It accelerates the biodegradation of plastics in waste environments through naturally occurring microbial activity. It is not affected by light... view more

Polyplastol 10 by Eigenmann & Veronelli is a pentaerythrityl tetrastearate. It acts as a processing aid. It can be used in the processing of polyacrylate-, ethylene acrylate-, perflurocarbon- & flurocarbon- and... view more

Polyplastol 15 by Eigenmann & Veronelli is a mixture of selected hydrocarbons & fatty acids. It acts as a processing aid. It is recommended for ethylene propylene terpolymer- and butadiene... view more

Polyplastol 16 by Eigenmann & Veronelli is polyplastol 16 by Eigenmann & Veronelli is a mixture of fatty acid ester and calcium soaps. It acts as a processsing aid. Polyplastol 16 is recommended for the processing of... view more