Dabco® DC1 by Evonik is a catalyst that provides strong gelling and back end cure by promoting the urethane (polyol-isocyanate) reaction while delaying initiation as well as providing long pot life... view more

Dabco® DC193 by Evonik is a silicone surfactant with improved foam formation. It provides excellent flame retardant properties. It possesses good compatibility with most common polyol premixes and... view more

Dabco® DC2 by Evinik is a catalyst that provides delayed reaction initiation while maintaining a strong back end cure. It promotes the urethane (polyol-isocyanate) reaction in flexible molded... view more

Dabco® DC2585 is a silicone surfactant and emulsifier by Evonik. Offers very good vent stability and has the ability to eliminate basal cell formation. Possesses low VOC and fogging values and... view more

Dabco® DC5990 is a high efficiency, non-hydrolyzable surfactant by Evonik. It can provide good nucleation, a high degree of emulsification, excellent froth stability and good bulk stability to... view more

Dabco® DC5LE by Evonik acts as an accelerator. It is a low emission delayed action co-catalyst that strongly promotes the urethane (polyol-isocyanate) reaction while maintaining cream time and... view more

Dabco® DC6070 by Evonik acts as an emulsifier. Possesses ability to eliminate basal cell formation in difficult-to-mold tooling. Offers excellent foam surface appearance and vent stability as well... view more

Dabco® K2097 by Evonik is a standard trimerization catalyst. Used for rigid foam applications. Dabco® K2097 is suitable for thermoset PU resin... view more

Dabco® LK-221 by Evonik is a unique organic surfactant for microcellular and rigid foam formulations. Provides a smooth surface and excellent adhesion. Can be used as a replacement or co-surfactant... view more

Dabco® LK-443 by Evonik is a unique organic surfactant for use in rigid polyurethane applications to provide a smooth surface. It can be used as a replacement or co-surfactant for silicone-based... view more

Dabco® MB20 by Evonik acts as a co-catalyst with a tertiary amine to accelerate the urethane reaction and cure. Exhibits delayed viscosity build on front-end at low usage level while promoting... view more

Dabco® MP601 by Evonik is a delayed action, balanced tertiary amine catalyst. It is developed for fast demold high resiliency (HR) molded foam systems. Provides effective balanced reactions with... view more

Dabco® MP602 by Evonik is a delayed non-emissive amine catalyst. It promotes the urethane (polyol-isocyanate) reaction. It was developed for use in cold cure and hot cure flexible molded... view more

Dabco® NE 400 is a novel non-emission (NE) catalyst by Evonik. Used in the production of polyester slabstock foam... view more

Dabco® NE1070 by Evonik is a non-emissive amine catalyst. It reacts into the polyurethane matrix, thereby not contributing to emissions. It is used in flexible foam applications to meet automotive... view more

Dabco® NE210 is a balanced non-emissive amine catalyst by Evonik. Offers no amine catalyst emissions, no VOC emissions, no vinyl staining and no windshield fogging. Possesses master batch stability... view more

Dabco® NE300 by Evonik is a non-emissive amine catalyst. Promotes the urea (water isocyanate) reaction. It possesses master batch stability. It reacts into the polyurethane matrix, thereby not... view more

Dabco® NE500 by Evonik acts as a non-emissive amine catalyst. It is used in flexible slabstock applications to meet Certipur® or LGA requirements. Shows equivalent foam physical properties, master... view more

Dabco® NE600 is a balanced non-emissive amine catalyst by Evonik. It reacts into the polyurethane matrix, thereby not contributing to emissions. It is used in flexible slabstock applications to meet... view more

Dabco® PM300 by Evonik is a blowing agent enhancer. It significantly reduces the level of conventional surfactant required. It produces fine uniform cells and reduces polyol side viscosity. Improves... view more