HS KA-001 is a castor oil polyol. It is a long pot life polyol. Its molecular weight is 500... view more

HS PPE-12H by Hokoku Corporation is a castor oil polyol. Provides hardness. Its molecular weight is 900... view more

LAV by Hokoku Corporation is a castor oil polyol. It is a low acidity polyol. Its molecular weight is 950... view more

LM-R by Hokoku Corporation is a castor oil polyol. It is a low moisture polyol. Its molecular weight is 950... view more

TLM is a castor oil polyol. It is a low moisture polyol. Its molecular weight is 950... view more

Blend of in-situ calcium stearate and fatty acid esters. Acts as a lubricant. Used in plastic pipes... view more

Hydroxypropyl methyl cellulose. Acts as release agent, softener and lubricant. It has good intermiscibility with water or organic solvents. Offers pH stability, retention of water, excellent... view more

Hydroxypropyl methyl cellulose. Acts as release agent, softener and lubricant. It has good intermiscibility with water or organic solvents. Offers pH stability, retention of water, excellent... view more

Hydroxypropyl methyl cellulose. Acts as release agent, softener and lubricant. It has good intermiscibility with water or organic solvents. Offers pH stability, retention of water, excellent... view more

Hydroxypropyl methyl cellulose. Acts as release agent, softener and lubricant. It has good intermiscibility with water or organic solvents. Offers pH stability, retention of water, excellent... view more

Rice bran wax. Acts as a plasticizer, stabilizer and lubricant. It is a natural vegetable wax. Compatible with PVC (polyvinyl chloride). Can be substituted for Chuan wax and carnauba wax... view more

Rice bran wax. Acts as a plasticizer, stabilizer and lubricant. It is a natural vegetable wax. Compatible with PVC (polyvinyl chloride). Can be substituted for Chuan wax and carnauba wax... view more

Fillteck™ 50CWCP (Cotton/Poly) by IFC is cotton/poly based fibers. Enhances the dimensional stability (fibers form the three-dimensional matrix in preforms), improves the green strength (naturally strong fibers... view more

Cellulose based fibers. Enhances the dimensional stability (fibers form three-dimensional matrix in preforms), improves the green strength (naturally strong fibers provide strength and structure... view more

Cellulose based fibers. Enhances the dimensional stability (fibers form three-dimensional matrix in preforms), improves the green strength (naturally strong fibers provide strength and structure... view more

Cotton based fibers. Enhances the dimensional stability (fibers form three-dimensional matrix in preforms), improves the green strength (naturally strong fibers provide strength and structure during... view more

Cotton based fibers. Enhances the dimensional stability (fibers form three-dimensional matrix in preforms), improves the green strength (naturally strong fibers provide strength and structure during... view more

DIMODAN® HP by IFF's Nutrition & Biosciences is distilled monoglyceride based antistatic agent. Offers very good mold release properties. It is compatible with polypropylene. Used for injection... view more

DIMODAN® HPL 70-1 KOSHER by IFF's Nutrition & Biosciences is distilled monoglyceride-based antistatic and mold release agent. It is compatible with block copolymer polypropylene. Used for injection... view more

DIMODAN® HS K-A by IFF's Nutrition & Biosciences acts as a reliable antistatic and mold release agent in many polymer applications. It is kosher approved distilled monoglyceride made from edible... view more

DIMODAN® MO 90/D by IFF's Nutrition & Biosciences is distilled monoglyceride-based antifogging agent. It is made from sunflower oil with a high content of monooleate. Used in PE packaging... view more

GRINDSTED® ACETEM 95 CO, LIQ by IFF's Nutrition & Biosciences is acetic acid ester-based efficient plasticizer. It is an alternative to many conventional phthalates/adipates. It is made from edible... view more

Photomer® 3005 by IGM Resins is a reactive epoxy soybean oil acrylate. It has 100% solids and medium viscosity designed for UV/EB curable systems. It forms flexible films, exhibits moderate cure speed... view more

Photomer® 4012 by IGM Resins is a very low viscosity monofunctional acrylated monomer which can be polymerized in the presence of free radicals. It exhibits reactivity, hardness, flexibility, yellowing... view more

INVIRIDIS™ by INEOS Styrolution (INEOS Group) is a bio-based, climate-friendly and sustainable olefin. It is made using bio-attributed cumene and reduces carbon footprint as compared to the... view more

DEG (Di ethylene glycols) by India Glycol is a stable, high-boiling, odorless and hygroscopic liquid, which is completely miscible in water. Used in polyethylene glycol and unsaturated resins. Applications include... view more

Monoethylene glycol. It is a colorless, odorless, non-volatile liquid derived from bio-ethanol. It is completely miscible in water and many organic solvents. The MEG manufactured is of minimum 99.5... view more

Triethylene glycol. It is a colorless, odorless and stable liquid with low viscosity and a high boiling point. It is miscible in water and hygroscopic in nature... view more

Disproportionated distilled tall oil rosin. Acts as a emulsifier. Suitable for manufacture of styrene-butadiene rubber... view more

Disproportionated distilled tall oil rosin. Acts as a emulsifier. Suitable for manufacture of styrene-butadiene rubber... view more

MWV Resin 795 (Na+ Salt of Resin 95) by Ingevity is stabilized tall oil rosin. It acts as a tackifier and emulsifier. It is a catalytically stabilized fluid resin. The high purity ensures stability and consistency in the... view more

Stabilized tall oil rosin. Acts as a tackifier and emulsifier. The high purity ensures stability and consistency in the polymer and its fluidity increases safety in handling and energy savings by... view more

MWV Resin 90 by Ingevity is stabilized tall oil rosin. Acts as a plasticizer, emulsifier and tackifier in any application requiring a low softening point, stabilized rosin. It is a light-colored... view more

Stabilized tall oil rosin. Acts as a tackifier and emulsifier. The high purity ensures stability and consistency in the polymer and its fluidity increases safety in handling and energy savings by... view more

MWV Rosin R-24 by Ingevity is highly refined, pale tall oil rosin. It acts as a tackifier. It contains high levels of rosin acids. Used in the manufacturing of rubber polymers... view more

Low molecular weight linear polyitaconic acid partially neutralized with sodium salt. Acts as a dispersant. It is 100% bio-based. Possesses excellent environmental profile. It demonstrates good... view more

Phthalate free, non-petroleum (organic) based heat-resistant product. Acts as a highly efficient process aid and internal lubricant. This agri-derived liquid does not contribute to fuel load and... view more

LIGNOCEL® CB 120 by JRS Rettenmaier is a natural wood fiber. It enhances the mechanical properties of the brittle duroplastic matrix. It is cost saving and improves the dimensional and form... view more

LIGNOCEL® HB 120 by JRS Rettenmaier is a brown colored hardwood product with a fibrous structure. It enhances the mechanical properties of the brittle duroplastic matrix. It improves the dimensional... view more

ARBOCEL® 566 by JRS Rettenmaier is a cellulose fiber. Its basic material is reclaimed cellulose. It is white in color and insoluble in water (if left in their natural state (not comparable to... view more

ARBOCEL® GC-10 by JRS Rettenmaier is a cellulose fiber. Its basic material is reclaimed cellulose. It is grey in color and insoluble in water (if left in their natural state (not comparable to... view more

ARBOCEL® GCW10 by JRS Rettenmaier is a cellulose fiber. Its basic material is reclaimed cellulose. It is white in color and insoluble in water (if left in their natural state (not comparable to... view more

Javachem® A-2000 is a N, N-bis (2-hydroxyethyl)-dodecanamide by Javachem. It is an internal antistatic agent. It is recommended for plastic resin products such as PE, PP, LDPE, HDPE, PVC, PS, SAN... view more

Javachem® A4-88 is a stearic acid ethoxylated amide by Javachem. It acts as an internal antistatic agent for various plastics such as PE, PP, LDPE, HDPE, PVC, PS, SAN & ABS. Javachem® A4-88 exhibits... view more

Javachem® AM is a blend of glycerin monostearate and ethoxylated amide by Javachem. It exhibits heat resistance and excellent antistatic performance. It is suitable for injection molding, extrusion... view more

2-OCTANOL PAC by Jayant Agro-Organics is a 8-carbon, secondary alcohol. It is derived from agricultural based raw-material viz. castor oil. It is also commonly called as capryl alcohol or methyl... view more

Jeluxyl® WEHO 500S by JeluWerk is a organical pine/fir wood and plant fiber (compound from cellulose and lignin). It is soft and light yellow colored powder. Used in wood plastic composites... view more

Jeluxyl® WEHO 500V by Jelu-Werk is an organic pine/fir wood and plant fiber (compound from cellulose and lignin). It is soft and light-yellow colored powder. It is used in wood plastic composites... view more

CITROFOL® AI by Jungbunzlauer is a triethyl citrate grade. It is A low viscose, odorless and acts as a plasticizer. It is derived out of 100 % agrarian raw materials. It exhibits high boiling point and... view more

CITROFOL® AII by Jungbunzlauer acts as a plasticizer. It is compatible with PVC. It complies with REACH. It is USDA certified... view more

CITROFOL® BI by Jungbunzlauer is a tributyl citrate grade. It is a bio-based product and acts as a plasticizer. It is based on renewable raw materials. It has low toxicity and is classified as... view more

CITROFOL® BII by Jungbunzlauer is a low viscose, odorless and tributyl O-acetylcitrate grade. It acts as a plasticizer. It is a bio-based product and is based on renewable raw materials. It possesses high... view more

CITROFOL® AHII by Jungbunzlauer is a tris (2-ethylhexyl)O-acetylcitrate grade. It is a bio-based product and acts as an outstanding plasticizer. It is based on renewable raw materials. It possesses low... view more

NJ -286 by Jurong Ningwu New Material Development is sucrose based polyether polyol. Recommended for all water-blown systems with good flowability. NJ -286 is used in the manufacture of rigid polyurethane foam... view more

NJ -4110 by Jurong Ningwu New Material Development is sucrose based polyether polyol. Used in the manufacture of rigid polyurethane foam... view more

Sucrose based polyether polyol. Used in the manufacture of rigid polyurethane foam... view more

Sucrose based polyether polyol. Recommended for cyclo/isopentane blown system. Used in the manufacture of rigid polyurethane foam... view more

Sucrose based polyether polyol. Used in the manufacture of rigid polyurethane foam... view more

Foam-Clear Esca-NV02 by KCC Basildon (Momentive) provides excellent antifoaming properties. It controls foam generation, enabling manufacturing processes to operate at full capacity without the risk... view more

Kenaf Fiber by KEFI Minerals is derived from processing the bark of the kenaf plant. It has a degree of purity from woody debris and pectins equal to 99%. It is highly appreciated in the... view more

KANAMOLL-620 by KLJ Group is epoxidized soyabean oil. It is a non-toxic, environ mental-friendly, secondary plasticizer & hydrochloric acid scavenger. It acts as co-stabilizing internal lubricant in... view more

KANAMOLL-650 by KLJ Group is epoxidized soyabean oil. It is a non-toxic, environ mental-friendly, secondary plasticizer & hydrochloric acid scavenger. It acts as co-stabilizing internal lubricant in... view more

KANAMOLL-651 by KLJ Group is epoxidized soyabean oil. It is a non-toxic, environ mental-friendly, secondary plasticizer & hydrochloric acid scavenger. It acts as co-stabilizing internal lubricant in... view more

POE (180) castor oil. Acts as detergent. It is a triglyceride ethoxylate with pellet appearance at 25°C. Used in polymerization and plastics... view more

POE (200) castor oil. Acts as an emulsifier as well as detergent. It is a triglyceride ethoxylate with pellet appearance at 25°C. Used in polymerization and plastics... view more

POE (25) castor oil. Acts as an emulsifier as well as detergent. It is a triglyceride ethoxylate with liquid appearance at 25°C. Used in polymerization and plastics... view more

Polyoxyethylenated (POE) (14) C16 - C18 alcohol. Acts as an emulsifier and also as a detergent. It has solid appearance at 25°C. Used in polymerization and plastics... view more

Polyoxyethylenated (POE) (15) C16 - C18 alcohol. Acts as an emulsifier. It has solid appearance at 25°C. Used in polymerization and plastics... view more

PALMERA A1813 (with C18:1 = 75% fractionated fatty acid) by KLK OLEO is derived from renewable vegetable oils. Used in production of oleamide, a primary amide used as slipping agent. It is a... view more

PALMERA A1818 by KLK OLEO is an oleic acid grade with C18:1 (= 75%) fractionated fatty acid, derived from renewable vegetable oils. Used in the production of oleamide, a primary amide used as... view more

PALMERA A5518 by KLK OLEO is stearic acid containing C18 (63-68%) fatty acid, derived from renewable vegetable oils. It is a biodegradable grade. It is a main raw material in making ethylene bis... view more

PALMERA A5608 by KLK OLEO contains C8 (53-63%) and C10 (35-45%) fatty acid. It is derived from renewable vegetable oils. It can be converted to fatty alcohol esters to use as plasticizers where it... view more

PALMERA A6016 by KLK OLEO is derived from renewable vegetable oils. It is used in production of plasticizer. It is HALAL and KOSHER certified. PALMERA A6016 is manufactured in GMP & HACCP certified... view more

ABIETA™ DRS 314K by KRATON is a potassium salt of dehydrogenated/partially hydrogenated rosin-based emulsifier. It is used in the polymerization process of SBR, NR, polychloroprene and... view more

ABIETA™ DRS 835 by KRATON is sodium salt of dehydrogenated/partially hydrogenated rosin-based emulsifier. Used in the polymerization process of styrene-butadiene rubber, nitrile rubber... view more

CENTURY™ 1224 Stearic Acid by KRATON is a saturated fatty acid-based lubricant. It contains approximately 70% C-18 stearic acid with typically 23% methyl branched C-18 saturated acids. It is derived... view more

SYLFAT™ 2 Tall Oil Fatty Acid by KRATON is used as plasticizers in rubber. It exhibits high fatty acid content & a low content of rosin acids and unsaponifiable. It provides a combination of low viscosity, light... view more

SYLFAT™ FA1 SPECIAL by KRATON is a tall oil fatty acid acting as a plasticizer in rubber to aid in processing. It can impart desirable properties and is similar to fatty acids from other fats and oils. It... view more

BioRes® 4007 by Kemwerke is a natural oil polyol type in MP/X. It is produced from the rich lauric fatty acid content of the coconut oil and is renewable, sustainable, environmentally and... view more

BioRes® 407XL by Kemwerke is a natural oil polyol type in xylene. It is produced from the rich lauric fatty acid content of the coconut oil and is renewable, sustainable, environmentally and... view more

PR 307 by Kemwerke based on coconut oil. It has high molecular weight, high cross-linking and hydroxyl functionality... view more

Acrylated polyol resin. Based on coconut oil. It has high molecular weight, high cross-linking and hydroxyl functionality... view more

Keratech 1307.1 by Kerax is hydrogenated castor oil (HCO). Acts as an internal lubricant. It is a non-toxic and non-hazardous material in flake form. Shows limited solubility in many organic solvents... view more

Keratech 1708 by Kerax is 12-Hydroxy stearic acid (12-HSA). Acts as an internal lubricant. It is a non-toxic and non-hazardous material in flake form. Shows limited solubility in many organic... view more

Keratech 1800 by Kerax is hydrogenated castor oil (HCO). It acts as an internal lubricant. It is a non-toxic and non-hazardous material in flake form. It shows limited solubility in many organic... view more

Standard hydrogenated castor oil (HCO). Acts as an internal lubricant. It is a non-toxic and non-hazardous material in flake form. Shows limited solubility in many organic solvents and insolubility... view more

Standard 12-hydroxy stearic acid (12-HSA). Acts as an internal lubricant. It is a non-toxic and non-hazardous material in flake form. Shows limited solubility in many organic solvents and... view more

Uniplex 280CG is sucrose benzoate. Acts as a plasticizer. It is a clear, odorless, and non-crystalline brittle solid with a sharp softening range starting at around 93°C. It has excellent... view more

Adiprene Green prepolymer line is a range of bio-based, methylene diphenyl diisocyanate (MDI) polyether prepolymers by Lanxess. It is a replacement for fossil based polyether prepolymers and in... view more

Kronitex® CDP by Lanxess is a naturally derived, phosphorus flame retardant. This triaryl phosphate ester based on phenol and cresol is used in PVC applications. It finds utility in synthetic... view more

Kronitex® TCP by Lanxess is a general-purpose, phosphorus-based flame retardant. This triaryl phosphate ester is produced from naturally derived cresols. It is useful in clear or dark flame... view more

Rhenodiv® BP-9500 by Lanxess is a release agent. It is an unfilled, silicone-free product based on glycol and vegetable oils. It is water-based, solvent-free and environmentally friendly. It allows... view more

Methylidinoglycerol. It is produced from 80 % vegetal glycerine. Has high solvent power and fully miscible with water... view more

Renewable bioplasticizer and melt viscosity enhancer. It is predominantly plant derived and enables polymers to be functional in standard processes such as injection molding, extrusion coating... view more

LENZING™ FR by Lenzing is heat protection fiber. It is produced from wood, a natural raw material. It offers protection against heat and flame in a variety of different applications. It is produced... view more

It is produced from indigenous beech wood. Lenzing Modal® by Lenzing is available in special colors including black. Lenzing Modal® is produced in an eco-friendly process using edelweiss technology... view more

AstroBio™ AP by Liberty Chemical is a 100% biodegradable blend of biosolvents. It is a reliable alternative to oil-derived and conventional solvents. It offers strong solvency power and is cost... view more

AstroBio™ BA by Liberty Chemical is a 100% biodegradable blend of biosolvents. It offers strong solvency power, environment protection and is cost effective. It shows outstanding flow-down... view more

AstroBio™ BC is a 100% biodegradable blend of biosolvents by Liberty Chemical. It offers environment protection, strong solvency power and is cost effective. It is 20% to 30% more efficient than... view more

AstroBio™ CX is a 100% biodegradable blend of biosolvents by Liberty Chemical. It is 20% to 30% more efficient than conventional oil-based solvents. It offers environment protection, strong solvency... view more

AstroBio™ DS is a 100% biodegradable biosolvents-based blend by Liberty Chemical. It offers better cleaning power and reduced solvent consumption vs. dibasic ester. It provides strong solvency... view more

Anti-Fog Additive AF1007 by Lifeline Technologies is a non-ionic organic compound derived from vegetative sources. Acts as an anti-fogging agent. Prevents fogging of film surfaces at low & high temperature during storage... view more

Insect Repellent Additive IR1010 by Lifeline Technologies is based on an unique blend of aromatic plant and other odoriferous compounds. It does not contain insecticides, pesticides or biocides, no... view more

Amphi™ CH by Locus Performance Ingredient is a natural, sustainable, gentle, multifunctional biosurfactant, dispersant and emulsifier. It is a GMO-free, hydrophilic wetting and coalescing agent. It has high activity... view more

Amphi™ CL by Locus Performance Ingredient is a natural, sustainable, gentle, multifunctional biosurfactant, dispersant and emulsifier. It is a GMO-free wetting and coalescing agent. It has high activity levels, high... view more

Amphi™ M by Locus Performance Ingredient is a natural, sustainable, gentle, multifunctional biosurfactant, dispersant and emulsifier. It is a GMO-free wetting and coalescing agent. It has high activity levels, high... view more

Soy polyol. This diol was developed to provide formulators with an exceptional, sustainable alternative to traditional petroleum products. Has higher reactivity, lower color and less steric... view more

Soybean oil polyol. Provides formulators with an exceptional, sustainable alternative to traditional petroleum products. Exhibits higher reactivity, 100% primary functionality, lower color and less... view more

Glycolic acid. It is produced in high yields from glucose. Used in the manufacture of plastics from agricultural raw material components. Also used in biobased plastic industry... view more

1, 3-Propanediol (PDO). Produced biologically from glycerol, a by-product of biodiesel production. It is a chemical base compound with exceptional physical qualities. Also, it is inexpensive and... view more

Additive masterbatch containing a high purity long-term antistatic agent of vegetable origin in PE carrier resin. It migrates slowly to the surface at a controlled rate to maintain long-lasting... view more

High-purity erucamide obtained from vegetable origin in PE carrier resin. Acts as a slip agent. Contains 5% active substance. Gives better CoF values in the long term when compared to oleamide. It... view more

PE SEA2555 by MLPlastics Additive Masterbatches is an additive masterbatch containing a blend of erucamide from vegetable origin and natural silica in PE carrier resin where oleamide acts as a slip agent and silica acts as... view more

PE based additive masterbatch containing a blend of high purity long-term and short-term antistatic agent both of vegetable origin. The combination offers excellent performance due to a synergistic... view more

PE SO4005 by MLPlastics Additive Masterbatches is high-purity oleamide obtained from vegetable origin in PE carrier resin. Acts as a slip agent. Contains 5% active substance. PE SO4005 can also act as a mold release agent... view more

HPMC by MPI Chemie is cellulose ether-based primary & secondary suspending agent. It is used for suspension polymerization of vinyl chloride. HPMC is used in PVC polymerization for the... view more

RD -PG11 by MPOB is palm oil based polyol. It is used in the manufacture of polyurethane which is suitable as an insulator in refrigerators, roof insulators, wall panels, ceiling panels, cornices... view more

RD -PG31 by MPOB is palm oil based polyol. It is used in the manufacture of polyurethane which is suitable as an insulator in refrigerators, roof insulators, wall panels, ceiling panels, cornices... view more

RD -PG51 by MPOB is palm oil based polyol. It is used in the manufacture of polyurethane which is suitable as an insulator in refrigerators, roof insulators, wall panels, ceiling panels, cornices... view more

Epoxidized soyabean oil. Acts as a plasticizer. It also acts as a scavenger for the acid and minimizes the deterioration of the PVC. Can be used in application demanding superior resistance to... view more

Epoxidized soyabean oil. Acts as a plasticizer and scavenger for the acid. It minimizes the deterioration of the PVC. Can be used in application demanding superior resistance to extraction. Used in... view more

Epoxidized soyabean oil. Acts as a plasticizer and stabilizer for PVC for hardness modification, gloss, sunlight-resistance, heat-resistance, low volatility and excellent gelling. MONSOL ESBO is a... view more

Epoxidized soybean oil. Acts as a plasticizer due to its better oxirane oxygen contents and higher molecular weight. Also acts as a scavenger for the acid and minimizes the deterioration of the PVC... view more

Epoxidized soybean oil. Acts as a plasticizer due to its better oxirane oxygen contents and higher molecular weight. Also acts as a scavenger for the acid and minimizes the deterioration of the PVC... view more

HS0840B by Mitsubishi Chemical is a biomass-based linear polycarbonate diol (with hydroxyl groups at both ends). It easily reacts with isocyanate compounds (such as MDI, TDI, IPDI, H12MDI) and... view more

HS0850B by Mitsubishi Chemical is a biomass-based linear polycarbonate diol (with hydroxyl groups at both ends). It easily reacts with isocyanate compounds (such as MDI, TDI, IPDI, H12MDI) and generate... view more

NL1010DB by Mitsubishi Chemical is a biomass-based linear polycarbonate diol (with hydroxyl groups at both ends). It easily reacts with isocyanate compounds (such as MDI, TDI, IPDI, H12MDI) and... view more

NL2010DB by Mitsubishi Chemical is a biomass-based linear polycarbonate diol (with hydroxyl groups at both ends). It easily reacts with isocyanate compounds (such as MDI, TDI, IPDI, H12MDI) and... view more

STABiO™ by Mitsui Chemicals is a non-yellowing aliphatic poly isocyanate derived from 1,5-pentamethylene diisocyanate (PDI). Exhibits improved gloss, chemical resistance and abrasion resistance. It... view more

Succinic acid (1, 4-butanedioic acid). It is a four-carbon dicarboxylic acid with a chemical structure similar to maleic anhydride (MAN). More environment friendly than its petroleum-derived... view more

Myrinol™ HP 210 by Myriant is made from renewable bio-succinic acid and is a cost effective high performance liquid polyol. It is designed for use in cast elastomers, polyesters, moisture cure... view more

Myrinol™ HP 210 Flex by Myriant is made from renewable bio-succinic acid and is a cost effective high performance liquid polyol. It is designed for use in cast elastomers, polyesters, UV curable... view more

Myrinol™ HP 310 by Myriant is made from renewable bio-succinic acid and is a cost effective high performance liquid polyol. It is designed for use in cast elastomers, polyesters, moisture cure... view more

Myrinol™ HP 56 by Myriant is made from renewable bio-succinic acid and is a cost effective linear polyol. It is designed for use in cast elastomers, polyesters, thermoplastic urethane, 2K urethane... view more

Bis (2, 2, 6, 6-tetramethyl-4-piperidyl) sebacate. It acts as a hindered amine light stabilizer. Exhibits constant vivid color and longer life... view more

NANJING CAPAUTE CHEMICAL-ESO by Nanjing Capatue Chemical is an epoxidized soybean oil. It is produced through the oxidation of high iodine value unsaturated soybean oil with hydrogen peroxide and organic acids such as acetic acid... view more

Oleamide is a blend of z-9-octadecenamide & oleic amide by Nanjing Lepuz Chemical. It contains vegetable oil-based oleamide. It acts as a slip-, opening-, anti-blocking- & anti-sticking agent. It... view more

Nano4elec - BioPE MB EC12 by Nano4 is an electrically conductive thermoplastic masterbatch based on bio-polyethylene. The electrical conductivity is achieved by adding different conductive carbon blacks... view more

Gum rosin/naphthenic oil blend. Acts as a tackifier and plasticizer. The term "pitch" usually connotes a residium of still bottoms type product. Rosin pitches contain no residium products... view more

Gum rosin. Acts as a tackifier and plasticizer. Is a thermoplastic, acidic resin. Has a high softening point and amber color. Is a product of the naval stores industry obtained during the... view more

Rosin oil/gum rosin blend. Acts as a naval stores-based NR, SR plasticizer and tackifier. Aids extrusions and processing and renders stocks tacky. Has no effect on cure rate. Prevents scorch... view more

Blended extracts of pine tar. Acts as a Tarene, silicon-dioxide blend plasticizer as well as tackifier for NR, SBR, IR, IIR, and polyisobutylenes. Aids processing and gives good green tack. Also... view more

Blended extracts of pine tar. Acts as a Tarene, silicon-dioxide blend plasticizer as well as tackifier for NR, SBR, IR, IIR, and polyisobutylenes. Reduces the mill-time over liquid pine tar... view more

Halloysite clay nanotubes. It is a unique and versatile nanomaterial that is naturally formed by surface weathering of aluminosilicate minerals, comprising aluminum, silicon, hydrogen and oxygen... view more

Vercet™ L100 by NatureWorks is 3,6-dimethyl-1,4-dioxane-2,5-dione. It is a high-purity L-lactide derived from bio-based feedstock. Vercet™ L100 is useful for the synthesis of polymers, elastomers... view more