HECO® CLEAN 4 PE by HECOPLAST acts as a slip agent with nucleation aid on a polyethylene carrier. It effectively cleans thermoplastic processing equipment, including injection molding machines... view more

HECO® ELAST 705 PO by HECOPLAST is an impact modifier and has polyolefin plastomer an active agent. It significantly improves the elasticity and flexibility and also enhances the flow properties and... view more

HECO® ELAST 706 PO by HECOPLAST is a soft-touch effect and frost effect modifier. It is characterized by a very high softness and a very low modulus. It is used for the production of soft hygiene films and... view more

HECO® ELAST 708 PO by HECOPLAST is a high molecular weight thermoplastic mixture. It acts as a soft-touch and frosting effect modifier. It supports very high elasticity of the polymers and their... view more

HECO® FOAM 940 PE by HECOPLAST is a chemical, endothermic blowing and nucleating agent. It is suitable for processing thermoplastic polymers in injection molding and extrusion. Its recommended dosage for... view more

HECO® FOAM 970 PO by HECOPLAST is a 70% endothermic system on a PE carrier. Acts as a blowing and nucleating agent. It has a starting temperature of about 150°C. The optimum gas yield will be... view more

HECO® NOX 625 PE by HECOPLAST is a 20% combination of primary and secondary antioxidant in PE. It prevents the damage to polymer chain which is usually caused by catalyst residues by saturation of... view more

HECO® NUK 425 PE by HECOPLAST is a 30% mixture of organic and inorganic active substances. Acts as a nucleating agent. It provides highly effective polymer nucleation for all PE-types with a very... view more

HECO® SLIP 103 PO by HECOPLAST is a 100% carbonic acid ester. Acts as a release, slip, anti-static and dispersing agent. Provides very high quality slip, release, dispersing and antistatic... view more

HECO® SLIP 112 PE by HECOPLAST is a 20%, high purity, high temperature stable primary fatty acid in PE. Acts as a release, anti-scratch and slip agent. Provides very high quality sliding and... view more

HECO® SLIP 120 PE by HECOPLAST is a 20% carbon fatty acid on a carrier supporting the sliding action, corresponds to the EC-RL 67/548. Acts as a release, semi-nucleating and slip agent. It increases... view more

HECO® SLIP 122 PE by HECOPLAST is a 22% of fatty acid on PE carrier. Acts as a release, semi-nucleating and slip agent. It increases output and counteracts residues in the plastification unit... view more

HECO® SLIP 150 PE by HECOPLAST is a 10% high purity, high temperature stable primary fatty acid in PE. Acts as a release, anti-blocking and slip agent. It is a high quality cream colored... view more

HECO® SLIP 152 PO by HECOPLAST is 100 % of a high purity, high temperature stable primary fatty acid without a carrier polymer. Acts as a release, anti-blocking and slip agent. It is offered as... view more

HECO® STAB 311 PE by HECOPLAST is a 15-20% polymer hindered amine with the combination of phenolic antioxidant and phosphite. Acts as an antioxidant and light stabilizer. It shows exceptionally high... view more

HECO® STAT 223 PE by HECOPLAST is a 12% short-long term antistatic agent. It is a combination of chemically-physically acting, non-ionic compounds, total content of 16% for articles in the packaging... view more

HECO® STAT 290 by HECOPLAST is a 100% high temperature anionic internal and external antistatic agent. Also acts as a mold release and slip agent. It shows exceptionally high temperature resistance... view more

HECO® STAT 291 by HECOPLAST is a 3% HECO® STAT 290 in 97% of water. Acts as an antistatic, mold release and slip agent. It is a very cost-effective alternative with the lowest product cost. It is... view more