ABIETA™ DRS 314K by KRATON is a potassium salt of dehydrogenated/partially hydrogenated rosin-based emulsifier. It is used in the polymerization process of SBR, NR, polychloroprene and... view more

ABIETA™ DRS 835 by KRATON is sodium salt of dehydrogenated/partially hydrogenated rosin-based emulsifier. Used in the polymerization process of styrene-butadiene rubber, nitrile rubber... view more

CENTURY™ 1224 Stearic Acid by KRATON is a saturated fatty acid-based lubricant. It contains approximately 70% C-18 stearic acid with typically 23% methyl branched C-18 saturated acids. It is derived... view more

Cenwax® G by KRATON is a mold release agent for plastics and rubbers. It is tri-glyceride of 12-hydroxystearic acid. Cenwax® G is used in gaskets... view more

CirKular+™ C1000 by KRATON is a multi-resin compatibilizer and performance enhancement additive for upcycling mixed post-consumer resin (PCR) and post-industrial resin (PIR) recycling streams. It... view more

CirKular+™ C1010 by KRATON is a multi-resin compatibilizer and performance enhancement additive for upcycling mixed post-consumer resin (PCR) and post-industrial resin (PIR) recycling streams. This... view more

CirKular+™ C1010 (50% recycled) by KRATON is a multi-resin compatibilizer and performance enhancement additive for upcycling mixed post-consumer resin (PCR) and post-industrial resin (PIR) recycling... view more

CirKular+™ C2000 by KRATON is a multi-resin compatibilizer and performance enhancement additive for upcycling mixed post-consumer (PCR) and post-industrial (PIR) polyolefinic streams suitable for... view more

CirKular+™ C3000 by KRATON is a compatibilizer and performance enhancement additive for upcycling mixed post-consumer (PCR) and post-industrial (PIR) polyolefinic streams suitable for multiple end... view more

KRATON™ A1535 H by KRATON is a modifier of thermoplastics and is used as a base material for compound formulations. It is a clear, linear tri-block co-polymer-based on styrene and ethylene/butylene... view more

KRATON™ A1536 H by KRATON is a modifier of thermoplastics and is used as a base material for compound formulations. It is a linear tri-block co-polymer-based on styrene and ethylene/butylene... view more

KRATON™ D0243 BT by KRATON is an impact modifier, supplied as a porous pellet dusted with talc. It is a clear, di-block co-polymer-based on styrene and butadiene with a polystyrene content of 33%... view more

KRATON™ D0243 E by KRATON is a modifier of bitumen or thermoplastics used in compound formulations. It is a clear, di-block co-polymer-based on styrene and butadiene with bound styrene of 31% mass. It... view more

KRATON™ D0243 K by KRATON is a modifier of bitumen or thermoplastics used in compound formulations. KRATON™ D0243 K is a clear, di-block co-polymer-based on styrene and butadiene with a polystyrene... view more

KRATON™ D0246 E by KRATON is a modifier of bitumen. It is a high vinyl, high di-block SBS polymer with bound styrene of 26% mass. The polymer contains uncoupled, di-coupled and multi-coupled... view more

KRATON™ D1101 AIM by KRATON is an impact modifier of bitumen in roofing felt compounds. It is a clear, linear block co-polymer based on styrene and butadiene with bound styrene of 31% mass. It is... view more

KRATON™ D1101 AS by KRATON is an impact modifier of bitumen in roofing felt compounds. It is a clear, linear block co-polymer based on styrene and butadiene with bound styrene of 31% mass. It is... view more

KRATON™ D1101 ASM by KRATON is an impact modifier of bitumen in roofing felt compounds. It is supplied as powder dusted with amorphous silica. It is a clear, linear block co-polymer based on styrene and... view more

KRATON™ D1101 AT by KRATON is an impact modifier of bitumen in roofing felt compounds. It is supplied as porous pellets dusted with talc. It is a clear, linear block co-polymer based on styrene and... view more

KRATON™ D1101 ATM by KRATON is an impact modifier of bitumen in roofing felt compounds. It is a clear, linear block co-polymer based on styrene and butadiene with bound styrene of 31% mass. It is... view more

KRATON™ D1101 AU by KRATON is an impact modifier of bitumen in roofing felt compounds. It is supplied as porous pellets undusted. It is a clear, linear block co-polymer based on styrene and butadiene... view more

KRATON™ D1101 BSM by KRATON is an impact modifier, supplied as a powder dusted with amorphous silica. It is a clear, linear tri-block co-polymer-based on styrene and butadiene with a polystyrene... view more

KRATON™ D1101 BT by KRATON is an impact modifier, supplied as a dusted porous pellet. It is used for modification of bitumen. It is a clear, linear tri-block co-polymer-based on styrene and butadiene... view more

KRATON™ D1101 BTM by KRATON is an impact modifier, used for modification of bitumen. It is a clear, linear tri-block co-polymer-based on styrene and butadiene with a polystyrene content of 31%. It is... view more

KRATON™ D1101 E by KRATON is a modifier of polymer and bitumen in roofing felt compounds and roads. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of 31%... view more

KRATON™ D1101 JO by KRATON is a modifier of bitumen or thermoplastics used in compound formulations. It is a clear, linear tri-block co-polymer-based on styrene and butadiene with a polystyrene... view more

KRATON™ D1101 JSM by KRATON is a modifier of bitumen or thermoplastics used in compound formulations. It is supplied as powder dusted with amorphous silica. KRATON™ D1101 JSM is a clear, linear... view more

KRATON™ D1101 JU by KRATON is a modifier of bitumen or thermoplastics used in compound formulations. It is a clear, linear tri-block co-polymer-based on styrene and butadiene with a polystyrene content... view more

KRATON™ D1101 KIM by KRATON is a modifier of bitumen or thermoplastics used in compound formulations. It is supplied as a dusted powder. It contains styrene and rubber in the ratio of 31:69. KRATON™... view more

KRATON™ D1101 KT by KRATON is a modifier of bitumen or thermoplastics suitable in compound formulations. It is a clear, linear tri-block co-polymer-based on styrene and butadiene with a polystyrene... view more

KRATON™ D1101 KU by KRATON is a modifier of bitumen or thermoplastics suitable in compound formulations. It is a clear, linear tri-block co-polymer-based on styrene and butadiene with a polystyrene... view more

KRATON™ D1102 BT by KRATON is an impact modifier. It is a clear, linear tri-block co-polymer-based on styrene and butadiene with a polystyrene content of 29.5%. It is supplied as a dusted pellet... view more

KRATON™ D1102 J by KRATON is a modifier of bitumen and polymers. It is a clear linear block co-polymer based on styrene and butadiene with bound styrene of 30% mass. KRATON™ D1102 J is also supplied as... view more

KRATON™ D1102 KT by KRATON is a modifier of bitumen or thermoplastics. It is a clear, linear tri-block co-polymer-based on styrene and butadiene, with a polystyrene content of 28%. It is supplied as a... view more

KRATON™ D1102 KU by KRATON is a modifier of bitumen or thermoplastics. It is supplied as an undusted porous pellet. It is a clear, linear tri-block co-polymer-based on styrene and butadiene, with a... view more

KRATON™ D1111 K by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is a clear, linear tri-block co-polymer based on styrene and isoprene with a polystyrene content... view more

KRATON™ D1113 K by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is a clear, linear block co-polymer-based on styrene and isoprene with a polystyrene content... view more

KRATON™ D1114 P by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is a clear, linear tri-block co-polymer-based on styrene and isoprene with a polystyrene content... view more

KRATON™ D1117 P by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It contains styrene and rubber in ratio of 17:83. It is a clear, linear tri-block co-polymer-based... view more

KRATON™ D1118 ES by KRATON is a modifier of bitumen. It is a clear, di-block co-polymer-based on styrene and butadiene with a polystyrene content of 33%. KRATON™ D1118 ES is supplied as porous... view more

KRATON™ D1118 ESM by KRATON is a modifier of bitumen. It is a clear, di-block co-polymer-based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous... view more

KRATON™ D1118 ET by KRATON is a modifier of bitumen. It is a clear, di-block co-polymer-based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with... view more

KRATON™ D1118 ETM by KRATON is a modifier of bitumen. It is a clear, di-block co-polymer-based on styrene and butadiene with a polystyrene content of 33%. KRATON™ D1118 ETM is supplied as powder... view more

KRATON™ D1119 P by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is also supplied in a dusted dense pellet (KRATON™ D1119 PT) and powder dusted with silica... view more

KRATON™ D1124 K by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is supplied as an undusted porous pellet. It is a clear, radial tri-block co-polymer-based on... view more

KRATON™ D1124 P by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is supplied as an undusted dense pellet. It is a clear, branched co-polymer-based on styrene... view more

KRATON™ D1126 P by KRATON is a modifier of bitumen or thermoplastics, suitable in compound formulations. It is a clear, radial co-polymer based on styrene and isoprene with a polystyrene content of... view more

KRATON™ D1152 ES by KRATON is a modifier of thermoplastics or bitumen. It is used in compound formulations. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene... view more

KRATON™ D1152 ESM by KRATON is a modifier of thermoplastics or bitumen. It is used in compound formulations. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of... view more

KRATON™ D1152 ET by KRATON is a modifier of thermoplastics or bitumen. It is suitable in compound formulations. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene... view more

KRATON™ D1155 BO by KRATON is an impact modifier of polymer and bitumen. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of 40% mass. It is supplied as a... view more

KRATON™ D1155 ES by KRATON is a modifier of bitumen. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted... view more

KRATON™ D1155 JO by KRATON is a modifier of polymer. It is supplied as a dusted crumb. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of 40% mass. KRATON™ D1155 JO is... view more

KRATON™ D1155 JOP by KRATON is a modifier of polymer. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets... view more

KRATON™ D1157 A by KRATON is a modifier of bitumen or thermoplastics used in compound formulations. KRATON™ D1157 A is a clear, linear block co-polymer-based on styrene and butadiene with bound... view more

KRATON™ D1157 AS by KRATON is an impact modifier of bitumen. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets... view more

KRATON™ D1157 ATM by KRATON is an impact modifier of bitumen. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as powder dusted... view more

KRATON™ D1157 ES by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is supplied as porous pellets dusted with amorphous silica. KRATON™ D1157 ES is a clear... view more

KRATON™ D1157 ETM by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of 29.5%... view more

KRATON™ D1161 J by KRATON is a modifier of bitumen and polymers. It is a clear linear block co-polymer-based on styrene and isoprene with bound styrene of 15% mass. KRATON™ D1161 J is also supplied... view more

KRATON™ D1161 K by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is a clear, linear tri-block co-polymer-based on styrene and isoprene, with a polystyrene... view more

KRATON™ D1161 P by KRATON is a modifier of bitumen or polymer. It is a clear, linear tri-block co-polymer-based on styrene and isoprene, with a polystyrene content of 15%. KRATON™ D1161 P contains styrene... view more

KRATON™ D1162 P by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is a clear, linear tri-block co-polymer based on styrene and isoprene with a polystyrene content... view more

KRATON™ D1163 J by KRATON is a modifier of bitumen or polymer. It is supplied in dusted, dense pellet form. KRATON™ D1163 J is a clear linear block co-polymer-based on styrene and isoprene with... view more

KRATON™ D1163 P by KRATON is a modifier of bitumen or polymer. It is a clear, linear tri-block co-polymer-based on styrene and isoprene, with a polystyrene content of 15%. It contains styrene and... view more

KRATON™ D1184 AIM by KRATON is a modifier of bitumen in roofing felt compounds. It is a clear, branched block co-polymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as... view more

KRATON™ D1184 AS by KRATON is a modifier of bitumen in roofing felt compounds. It is a clear, branched block co-polymer-based on styrene and butadiene with bound styrene of 30% mass. It is supplied... view more

KRATON™ D1184 ASM by KRATON is a modifier of bitumen in roofing felt compounds. It is a clear, branched block co-polymer-based on styrene and butadiene with bound styrene of 30% mass. It is supplied... view more

KRATON™ D1184 AT by KRATON is a modifier of bitumen in roofing felt compounds. It is a clear, branched block co-polymer-based on styrene and butadiene with bound styrene of 30% mass. It is supplied... view more

KRATON™ D1189 AS by KRATON is an impact modifier, used in compound formulations. It is a clear, radial block co-polymer-based on styrene and butadiene with bound styrene of 32% mass. It is supplied as... view more

KRATON™ D1189 ASM by KRATON is an impact modifier, used in compound formulations. It is a clear, radial block co-polymer-based on styrene and butadiene with bound styrene of 32% mass. It is supplied... view more

KRATON™ D1189 AT by KRATON is an impact modifier, used in compound formulations. It is a clear, radial block co-polymer-based on styrene and butadiene with bound styrene of 32% mass. It is supplied as... view more

KRATON™ D1191 EIM by KRATON is an impact modifier, supplied as powder dusted with calcium carbonate. It is a clear, radial block co-polymer-based on styrene and butadiene with bound styrene of 33.5%... view more

KRATON™ D1191 ES by KRATON is an impact modifier, supplied as porous pellets dusted with amorphous silica. It is a clear, radial block co-polymer-based on styrene and butadiene with bound styrene of... view more

KRATON™ D1191 ESM by KRATON is an impact modifier, supplied as powder dusted with amorphous silica. It is a clear, radial block co-polymer-based on styrene and butadiene with bound styrene of 33.5%... view more

KRATON™ D1191 ET by KRATON is an impact modifier, supplied as porous pellets dusted with talc. It shows low viscosity for easy thermoplastic melt processing or processing in solution. It is a clear... view more

KRATON™ D1192 AS by KRATON is an impact modifier, supplied as porous pellets dusted with amorphous silica. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of... view more

KRATON™ D1192 ASM by KRATON is an impact modifier, supplied as powder dusted with amorphous silica. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of 30%... view more

KRATON™ D1192 AT by Kraton Polymers is an impact modifier, supplied as porous pellets dusted with talc. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of... view more

KRATON™ D1192 ATM by KRATON is an impact modifier, supplied as powder dusted with talc. It is a clear, linear block co-polymer-based on styrene and butadiene with bound styrene of 30% mass. It... view more

KRATON™ D1192 BT by KRATON is an impact modifier of polymer. It is a clear linear block co-polymer-based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets... view more

KRATON™ D1192 ES by KRATON is an impact modifier of polymer. It is a clear linear block co-polymer-based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets... view more

KRATON™ D1192 ESM by KRATON is an impact modifier of polymer. It is a clear linear block co-polymer-based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted... view more

KRATON™ D1192 ET by KRATON is an impact modifier of polymer. It is a clear linear block co-polymer-based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellet... view more

KRATON™ D1192 ETM by KRATON is an impact modifier of polymer. It is a clear linear block co-polymer-based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted... view more

KRATON™ D2105 AT by KRATON is an impact modifier. It is an oiled polymer-based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a porous pellet dusted with talc. KRATON™... view more

KRATON™ D4150 AT by KRATON is an impact modifier. It is a linear, oiled block co-polymer-based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a dusted porous pellet... view more

KRATON™ D4150 AU by KRATON is an impact modifier. It is a linear, oiled block co-polymer-based on styrene and butadiene with a polystyrene content of 31%. It is supplied as an undusted porous... view more

KRATON™ D4153 ES by KRATON is a modifier of bitumen. It is an oil-extended linear block co-polymer-based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It contains 40 phr... view more

KRATON™ D4153 ESM by KRATON is a modifier of bitumen. It is an oil-extended linear block co-polymer-based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It contains 40... view more

KRATON™ D4270 JS by KRATON is a modifier of bitumen. It is an oil-extended branched block co-polymer-based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is... view more

KRATON™ D4270 JSP by KRATON is a modifier of bitumen. It is an oil-extended branched block co-polymer-based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is... view more

KRATON™ D4270BT by KRATON is an impact modifier, supplied as a dusted porous pellet. It is an oiled, branched co-polymer-based on styrene and butadiene with a polystyrene content of 32%. Acts as an... view more

KRATON™ D4271 JS by KRATON is a modifier of bitumen. It is an oil-extended branched block co-polymer-based on styrene and butadiene, with bound styrene of 45% mass. It is supplied as dusted crumb. It... view more

KRATON™ D4271 JSP by KRATON is a modifier of bitumen. It is an oil-extended branched block co-polymer-based on styrene and butadiene, with bound styrene of 45% mass. It is supplied as dusted dense... view more

KRATON™ FG1901 G by KRATON is a modifier of bitumen and polymers. It is a clear, linear triblock copolymer-based on styrene and ethylene/butylene with a polystyrene content of 30%. It contains... view more

KRATON™ FG1924 G by KRATON is a modifier of bitumen and thermoplastics used in compound formulations. It is a clear, linear triblock copolymer-based on styrene and ethylene/butylene with a polystyrene... view more

KRATON™ G1633 E by KRATON is a modifier of thermoplastics and used as a base material for compound formulations. It is a clear linear tri-block co-polymer-based on styrene and ethylene/butylene... view more

KRATON™ G1640 E by KRATON is a modifier of thermoplastics and used as a base material for compound formulations. It is a clear linear tri-block co-polymer-based on styrene and ethylene/butylene... view more

KRATON™ G1641 H by KRATON is a modifier of thermoplastics and bitumen. It is a clear, linear tri-block co-polymer-based on styrene and ethylene/butylene with a polystyrene content of 33%. It is also... view more

KRATON™ G1642 H by KRATON is a modifier of thermoplastics and bitumen. It is also used in compound formulation. It is a clear, linear tri-block co-polymer-based on styrene and ethylene/butylene with... view more

KRATON™ G1643 V by KRATON is a modifier of bitumen and thermoplastics. It is also used in compound formulation. It is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a... view more

KRATON™ G1645 V by KRATON is a linear tri-block co-polymer-based modifier. It enhances mid-block for increased compatibility with polypropylene. It exhibits good UV- and thermal stability. KRATON™... view more

KRATON™ G1650 by KRATON is a thickening agent and viscosity modifier. It is styrene-ethylene-butylene-styrene (SEBS) linear polymer with a tri-block structure. It solidifies mineral oils to provide... view more

KRATON™ G1651 by KRATON is a thickening agent and viscosity modifier. It is styrene-ethylene-butylene-styrene (SEBS) linear polymer with a tri-block structure. It solidifies mineral oils to provide... view more

KRATON™ G1652 by KRATON is a thickening agent and viscosity modifier. It is styrene-ethylene-butylene-styrene (SEBS) linear polymer with a tri-block structure. It provides elasticity and creates an... view more

KRATON™ G1654 by Kraton is a thickening agent and viscosity modifier. It is styrene-ethylene-butylene-styrene (SEBS) linear polymer with a tri-block structure. It shows excellent compatibility with... view more

KRATON™ G1657 by Kraton is a thickening agent and viscosity modifier. It is styrene-ethylene-butylene-styrene (SEBS) linear polymer with a tri-block structure. It imparts elasticity and creates an... view more

KRATON™ G1701 E by KRATON is a modifier of bitumen or thermoplastics. It functions as a base material for compound formulations and oil gel applications. It is a clear linear di-block co-polymer-based... view more

KRATON™ G1701 M by KRATON is a modifier of bitumen and polymers. It is a clear, linear di-block co-polymer-based on styrene and ethylene/propylene with a polystyrene content of 37%. KRATON™ G1701 M... view more

KRATON™ G1702 H by KRATON is a modifier of bitumen or thermoplastics, used in compound formulations. It is a clear, linear di-block co-polymer-based on styrene and ethylene/propylene with a... view more

KRATON™ G1726 by Kraton is a thickening agent and viscosity modifier. It is a styrene-ethylene-butylene-styrene (SEBS) linear polymer with a tri-block structure. It shows excellent compatibility... view more

KRATON™ G1730 V by KRATON is a modifier of polymers. It is a clear co-polymer-based on styrene and ethylene/propylene with a polystyrene content of 21%. It contains styrene and rubber in ratio of... view more

KRATON™ G1750 M by KRATON is a clear, modifier of polymers. It is a multi-arm polymer-based on ethylene/propylene. KRATON™ G1750 M is used as an ingredient in formulating compounds for footwear... view more

KRATON™ G1750 V by KRATON is a modifier of polymers. It is a clear, multi-arm polymer-based on ethylene/propylene. KRATON™ G1750 V is used as an ingredient in formulating compounds for footwear... view more

KRATON™ MD1648 by KRATON acts as an impact modifier for high melt flow PP. It is easy to apply, mold, cast or process with low residual stress. Designed for oil/ plasticizer-free compounds, long... view more

SYLFAT™ 2 Tall Oil Fatty Acid by KRATON is used as plasticizers in rubber. It exhibits high fatty acid content & a low content of rosin acids and unsaponifiable. It provides a combination of low viscosity, light... view more

SYLFAT™ EPG by KRATON is a tall oil fatty acid acting as a plasticizer in rubber. SYLFAT™ EPG is also used as lubricant... view more

SYLFAT™ FA-3 by KRATON is a tall oil fatty acid acting as a plasticizer in rubber. SYLFAT™ FA-3 is also used as lubricant... view more

SYLFAT™ FA1 SPECIAL by KRATON is a tall oil fatty acid acting as a plasticizer in rubber to aid in processing. It can impart desirable properties and is similar to fatty acids from other fats and oils. It... view more

SYLFAT™ FA1 Tall Oil Fatty Acid by KRATON is a tall oil fatty acid (TOFA) acting as a plasticizer in rubber to aid in processing. It combines a long carbon chain (C18) of relatively high... view more

SYLFAT™ FA2 Tall Oil Fatty Acid by KRATON is a tall oil fatty acid (TOFA) acting as a plasticizer in rubber to aid in processing. It shows low viscosity, reactive poly-unsaturation and low saturated... view more

SYLVALITE™ RE 105L Rosin Ester by KRATON is pentaerythritol ester of tall oil rosin-based tackifier. It provides good specific adhesion to a variety of substrates, light color, low volatility at elevated... view more

SYLVALITE™ RE 110L Rosin Ester by KRATON is pentaerythritol ester of tall oil rosin-based tackifier. It is a light-colored and high softening point additive. It provides good specific adhesion to a... view more

SYLVALITE™ RE 80 HP by KRATON is a low odor, light-colored rosin ester-based tackifier. It provides excellent performance and aging stability. It offers compatibility with EVA, ethylene ethyl... view more

SYLVALITE™ RE 85L by KRATON is a low odor, light-colored rosin ester-based tackifier. It provides good heat and storage stability. It offers compatibility with EVA, ethylene ethyl acrylate, SIS, SBS... view more

SYLVAPACK™ RE 100 RC by KRATON is a light-colored tall oil rosin-based tackifier. It provides good heat and oxidative stability. It is approved by FDA and exhibits low volatility. It offers compatibility... view more

SYLVARES™ 520 by KRATON is an adhesion promoter additive. It is phenol-modified co-polymer of styrene and alpha methyl styrene. SYLVARES™ 520 is used in packaging... view more

SYLVARES™ RA-110 by KRATON is modified alkyd resin-based dispersing agent. SYLVARES™ RA-110 offers improved processing and mechanical properties... view more

SYLVARES™ TP-7042 by KRATON is a high softening point terpene phenol resin-based adhesion promoter. SYLVARES™ TP-7042 provides very good compatibility and solubility in a wide range of applications... view more

SYLVARES™ TR-1115T by KRATON is a thermally stable polyterpene tackifier resin. It shows compatibility with PE and natural rubber. SYLVARES™ TR-1115T is used in packaging and gaskets... view more

SYLVARES™ TR-7125 by KRATON is a high softening point, thermally stable polyterpene tackifier. It provides very good properties to a variety of natural rubber and synthetic resin (such as ethylene vinyl... view more

SYLVAROS™ 356/85 Disproportionated Rosin Soap by KRATON is an emulsifier used in polymerization process of SBR, NBR, polychloroprene and ABS plastics. It is based on disproportionated rosin neutralized with potassium hydroxide... view more

SYLVAROS™ 85 Tall Oil Rosin by KRATON is an emulsifier designed rubber chemicals. It is an unmodified fraction from refining of tall oil. It provides high content of rosin acids. SYLVAROS™ 85 Tall... view more

SYLVAROS™ DR 731D Disproportionated Rosin by KRATON is a rosin-based emulsifier used for polymerization. It is a pale, highly color stable resin with a rosin acid content of about 90%. It also... view more

SYLVAROS™ DRS 214 Disproportionated Rosin Soap by KRATON acts as an emulsifier in the polymerization process of SBR, NR, polychloroprene and ABS plastics. It is based on disproportionated rosin... view more

SYLVAROS™ DRS 214K Disproportionated Rosin Soap by KRATON is an emulsifier used in the polymerization process of SBR, nitrile rubber, polychloroprene and ABS plastics. It is based on an aqueous... view more

SYLVAROS™ DRS 215 Disproportionated Rosin Soap by KRATON is an emulsifier used in the polymerization process of SBR, nitrile rubber, polychloroprene and ABS plastics. It is based on... view more

SYLVAROS™ DRS 40 Disproportionated Rosin Soap by KRATON is an emulsifier used in SBR polymerization. It is a catalytically disproportionated tall oil rosin potassium soap. It converts abietic acid... view more

SYLVAROS™ DRS 42 Disproportionated Rosin Soap by KRATON is an emulsifier used in SBR polymerization. It is a catalytically disproportionated tall oil rosin potassium soap. It converts abietic acid into the more oxidation resistant... view more

SYLVAROS™ DRS 731 Disproportionated Rosin Soap by KRATON is an emulsifier suitable in the polymerization process of SBR, nitrile rubber, polychloroprene and ABS plastics. It is based on... view more

SYLVAROS™ NCY Tall Oil Rosin by KRATON is an emulsifier used in rubber chemicals. It is based on unmodified fraction from the refining of tall oil. It exhibits low fatty acid content and standard... view more

SYLVATAC™ RE 100 by KRATON is pentaerythritol ester of rosin -based tackifier. It provides good heat and aging stability and exhibits low volatility. It offers compatibility with EVA, ethylene ethyl... view more

SYLVATAC™ RE 85 Rosin Ester by KRATON is a stabilized glycerol ester of tall oil rosin-based tackifier. It offers thermal stability, light-color and low Tg. It provides compatibility with EVA, EBA, SIS, SBS, NR... view more

SYLVATAL™ D25LR Distilled Tall Oil by KRATON acts as an anti-stripping and release agent. It is a low viscosity, liquid long fatty acid chain. It exhibits monocarboxylic acid functionality and low saturated fatty acid... view more

SYLVATAL™ D30E by KRATON is a distilled tall oil-based lubricant. It is designed for polymers... view more

SYLVATAL™ D30LR Distilled Tall Oil by KRATON acts as an anti-stripping and release agent. It is a low viscosity, liquid long fatty acid chain. It exhibits monocarboxylic acid functionality and low... view more

SYLVATAL™ D40LR Distilled Tall Oil by KRATON acts as an anti-stripping and release agent. It is a low viscosity, liquid long fatty acid chain. It shows compatibility with other liquid fatty acid and vegetable oils. It... view more

SYLVATAL™ S40 by KRATON is a distilled tall oil-based lubricant. It is used for polymers... view more

SYLVATAL™ S40DD by KRATON is a distilled tall oil-based lubricant. SYLVATAL™ S40DD is used for polymers... view more

UNI-TAC™ 70 Rosin Tackifier by KRATON is a modified rosin-based tackifier. It imparts an excellent combination of oxidation- and crystallization resistance. It provides properties like good... view more

KRATON™ D1102 ASM by Kraton Polymers is a clear, linear block copolymer based on styrene and butadiene with a polystyrene of 29.5% mass. Acts as an impact modifier. It is supplied as powder dusted... view more

KRATON™ D1102 AU by Kraton Polymers is a clear, linear block copolymer based on styrene and butadiene with a polystyrene of 28.5% mass. Acts as an impact modifier. It is supplied as undusted porous... view more

KRATON™ D1116 AT by Kraton Polymers is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. Acts as an impact modifier. It is supplied as porous... view more